main
Ray hd688adr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) bd4a2ff
{
  "slug": "hd688adr",
  "version": "0.1.0",
  "type": "component",
  "description": "Broadic RS-485/RS-422 ICs, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "comm-uart",
    "hd688adr"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hd688adr.kicad_sym",
    "hd688adr.kicad_mod",
    "hd688adr.glb",
    "hd688adr.step",
    "hd688adr.lbr",
    "docs/hero.png",
    "docs/hd688adr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hd688adr-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "HD688ADR",
    "manufacturer": "Broadic",
    "package": "SOP-16",
    "pin_count": 16,
    "category": "RS-485/RS-422 ICs",
    "parts": {
      "symbol": "hd688adr.kicad_sym",
      "footprint": "hd688adr.kicad_mod",
      "model_3d": "hd688adr-etched.glb",
      "model_3d_plain": "hd688adr.glb",
      "model_3d_step": "hd688adr-etched.step",
      "model_3d_step_plain": "hd688adr.step",
      "lbr": "hd688adr.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "BUSL2",
        "type": "passive",
        "description": "Meter-bus line 2 connection. One of the two polarity-insensitive M-Bus terminals; typically connected to the bus through a series protection resistor (RL2 ≈ 220 Ω)."
      },
      {
        "number": "2",
        "name": "VB",
        "type": "passive",
        "description": "Rectified bus voltage output. Provides the rectified M-Bus signal after the internal bridge (BR); reference for VSTC and the PF undervoltage detector."
      },
      {
        "number": "3",
        "name": "STC",
        "type": "passive",
        "description": "External power-hold capacitor pin (CSTC). Stores energy from the bus to keep VDD alive during transmit modulation; recommended CSTC ≥ 50 µF (≤220 µF at RRIDD=13 kΩ, ≤470 µF at RRIDD=30 kΩ)."
      },
      {
        "number": "4",
        "name": "RIDD",
        "type": "passive",
        "description": "External resistor pin to set CS1 quiescent bus current. RRIDD = 13-80 kΩ (13 kΩ → IBUS ≈ 3 mA, 30 kΩ → IBUS ≈ 1.5 mA); VRIDD ≈ 1.23-1.33 V at 30 kΩ."
      },
      {
        "number": "5",
        "name": "PF",
        "type": "output",
        "description": "Power-fail / undervoltage indication output. Signals bus undervoltage: high (≈VBAT − 0.6 V) when VVB ≥ VSTC + 0.8 V, low (≤0.9 V) when VVB ≤ VSTC + 0.3 V."
      },
      {
        "number": "6",
        "name": "SC",
        "type": "passive",
        "description": "External sample/hold capacitor pin (CSC) for the receiver's dynamic threshold circuit. Charging current typ. −15 to −40 µA at VSC = 24 V; VSC tracks VVB."
      },
      {
        "number": "7",
        "name": "TXI",
        "type": "output",
        "description": "Inverted transmit data output. Complementary to TX; VOH ≈ VBAT − 0.6 V at IOH = −100 µA, VOL ≤ 0.5 V at IOL = 100 µA. Used together with TX to drive the bus modulator (optionally via an optocoupler)."
      },
      {
        "number": "8",
        "name": "TX",
        "type": "output",
        "description": "Transmit data output (non-inverted). Drives the bus current-modulator; VOH ≈ VBAT − 0.6 V, VOL ≤ 1.5 V at 1.1 mA sink. Modulation current IMC ≈ 11.5-19.5 mA with RRIS = 100 Ω."
      },
      {
        "number": "9",
        "name": "BAT",
        "type": "power_in",
        "description": "Logic-level reference / battery input. Sets the TX/TXI output high level and RX/RXI input high threshold; VBAT range 2.5-3.8 V (abs max 5.5 V), and must satisfy VBAT(max) ≤ VSTC − 1 V."
      },
      {
        "number": "10",
        "name": "VS",
        "type": "output",
        "description": "Bus/battery supply-mode switch output. Drives an external P-MOSFET (e.g. BSS84) to gate battery supply: pulled to ≈VSTC when VDD is on (bus supply available), high-impedance (≈0.3-1 MΩ) when VDD is off so the battery can take over."
      },
      {
        "number": "11",
        "name": "VDD",
        "type": "power_out",
        "description": "Regulated 3.3 V supply output for the slave/sensor system. VVDD = 3.1-3.4 V at IVDD = 1 mA (VSTC = 6.5 V); output resistance ≈5 Ω at 2-8 mA."
      },
      {
        "number": "12",
        "name": "RX",
        "type": "input",
        "description": "Received data input from the host UART (non-inverted). VIH ≥ VBAT − 0.8 V (up to 5.5 V when VSTC ≥ 6.5 V), VIL ≤ 0.8 V; IRX ≈ −10 to −40 µA at VRX = 0 V."
      },
      {
        "number": "13",
        "name": "RXI",
        "type": "input",
        "description": "Inverted received data input, complementary to RX. Same VIH/VIL thresholds as RX; IRXI ≈ 10-40 µA. Together RX/RXI form the differential control for the transmit modulator."
      },
      {
        "number": "14",
        "name": "RIS",
        "type": "passive",
        "description": "External resistor pin (RRIS) that sets the bus modulation (send) current. RRIS ≥ 100 Ω → IMC ≈ 11.5-19.5 mA; VRIS ≈ 1.4-1.7 V at 100 Ω."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference. All device voltages are referenced to this pin."
      },
      {
        "number": "16",
        "name": "BUSL1",
        "type": "passive",
        "description": "Meter-bus line 1 connection. The other polarity-insensitive M-Bus terminal; typically connected to the bus through a series protection resistor (RL1 ≈ 220 Ω). Absolute-max differential VMB(BUSL2-BUSL1) = ±50 V."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C3445811",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T18:59:10Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "hd688adr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hd688adr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "adfb92b1dbf045d0d43f714cd2a308804ccbd21b2299ca9b8fed4e6a689724ed",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}