component
HD588L
Public Made by Adomby adom
Broadic RS-485 / RS-422 ICs, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
HD588L
Broadic · RS-485 / RS-422 ICs · SO-8
HD588L from Broadic, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: with the receiver enabled, RO goes high when V(A)-V(B) > -50 mV and goes low when V(A)-V(B) < -200 mV. |
| 2 | RE | input | Receiver output enable, active low: RO is valid when RE is low, the receiver is disabled when RE is high, and RE high with DE low puts the whole chip into shutdown. |
| 3 | DE | input | Driver output enable: driver is enabled when DE is high and disabled with outputs in high impedance when DE is low, and DE low with RE high puts the whole chip into shutdown. |
| 4 | DI | input | Driver input: a low level forces the non-inverting output low and the inverting output high, and a high level forces the non-inverting output high and the inverting output low. |
| 5 | GND | power_in | Ground reference for all device voltages; absolute ratings are referenced to this pin. |
| 6 | A | bidirectional | Bus interface, non-inverting driver output and non-inverting receiver input, rated -8 V to +13 V absolute maximum. |
| 7 | B | bidirectional | Bus interface, inverting driver output and inverting receiver input, rated -8 V to +13 V absolute maximum. |
| 8 | VCC | power_in | Positive supply for 3.3 V or 5 V operation (absolute maximum +6 V), to be bypassed to GND with a 0.1 µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadic |
| Package | SO-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
HD588L - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
hd588l-etched.step/hd588l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hd588l.step/hd588l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadic datasheet (12 pp, sha256
592f1449bf37d0da, retrieved 2026-10-09, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HD588L
**Broadic** · RS-485 / RS-422 ICs · SO-8
HD588L from Broadic, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: with the receiver enabled, RO goes high when V(A)-V(B) > -50 mV and goes low when V(A)-V(B) < -200 mV. |
| 2 | RE | input | Receiver output enable, active low: RO is valid when RE is low, the receiver is disabled when RE is high, and RE high with DE low puts the whole chip into shutdown. |
| 3 | DE | input | Driver output enable: driver is enabled when DE is high and disabled with outputs in high impedance when DE is low, and DE low with RE high puts the whole chip into shutdown. |
| 4 | DI | input | Driver input: a low level forces the non-inverting output low and the inverting output high, and a high level forces the non-inverting output high and the inverting output low. |
| 5 | GND | power_in | Ground reference for all device voltages; absolute ratings are referenced to this pin. |
| 6 | A | bidirectional | Bus interface, non-inverting driver output and non-inverting receiver input, rated -8 V to +13 V absolute maximum. |
| 7 | B | bidirectional | Bus interface, inverting driver output and inverting receiver input, rated -8 V to +13 V absolute maximum. |
| 8 | VCC | power_in | Positive supply for 3.3 V or 5 V operation (absolute maximum +6 V), to be bypassed to GND with a 0.1 µF capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadic |
| Package | SO-8 |
| Category | Interface |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `HD588L`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `hd588l-etched.step` / `hd588l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hd588l.step` / `hd588l.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Broadic datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589784993254965248) (12 pp, sha256 `592f1449bf37d0da`, retrieved 2026-10-09, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hd588l-datasheet.pdf)