main
Ray
Publish 0.1.0
45653ec
HCPL0601
onsemi · Optocouplers - Logic Output · SOIC-8
HCPL0601 from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection (N/C) shown in the single-channel circuit drawing. |
| 2 | ANODE | input | LED anode (+VF) input; DC forward current IF is 6.3 mA min to 15 mA max recommended, 50 mA absolute maximum, with 5.0 V maximum reverse voltage. |
| 3 | CATHODE | input | LED cathode (-VF) input return; the input is a two-terminal LED with pins 1-4 on the isolated input side. |
| 4 | NC | unconnected | No internal connection (N/C) shown in the single-channel circuit drawing. |
| 5 | GND | power_in | Output-side ground; a 0.1 µF bypass capacitor must be connected between pins 8 and 5. |
| 6 | VO | output | Open-collector logic gate output (allows wired-OR), requires pull-up RL of 330 Ω to 4 kΩ, 7.0 V maximum output voltage and 50 mA maximum output current. |
| 7 | VE | input | Strobe enable input, low level 0 to 0.8 V and high level 2.0 V to VCC (not to exceed VCC by more than 500 mV), has an internal pull-up so it can be left not connected. |
| 8 | VCC | power_in | Supply voltage for the output, 4.5 V to 5.5 V recommended and 7.0 V absolute maximum (1 minute), bypassed with 0.1 µF to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Current, Low Level | IFL | 0 | 250 | µA | 4 | ||
| Input Current, High Level | IFH | 6.3 | 15 | mA | Printed footnote * (guard banded value) | 4 | |
| Supply Voltage, Output | VCC | 4.5 | 5.5 | V | 4 | ||
| Enable Voltage, Low Level | VEL | 0 | 0.8 | V | Single Channel only | 4 | |
| Enable Voltage, High Level | VEH | 2 | V | Single Channel only; max printed as VCC | 4 | ||
| Operating Temperature | TA | -40 | 85 | °C | 4 | ||
| Storage Temperature | TSTG | -40 | 125 | °C | 4 | ||
| Operating Temperature | TOPR | -40 | 85 | °C | 4 | ||
| DC/Average Forward Input Current | IF | 50 | mA | Single Channel | 4 | ||
| Enable Input Voltage | VE | 5.5 | V | Single Channel; not to exceed VCC by more than 500mV | 4 | ||
| Reverse Input Voltage (each channel) | VR | 5 | V | each channel | 4 | ||
| Power Dissipation | PI | 45 | mW | Single Channel | 4 | ||
| Supply Voltage | VCC | 7 | V | 1 minute max | 4 | ||
| Output Current (each channel) | IO | 50 | mA | Single Channel | 4 | ||
| Output Voltage (each channel) | VO | 7 | V | each channel | 4 | ||
| Collector Output Power Dissipation | PO | 85 | mW | Single Channel | 4 | ||
| Input Forward Voltage | VF | 1.8 | V | IF = 10mA | 5 | ||
| Input Reverse Breakdown Voltage | BVR | 5 | V | IR = 10µA | 5 | ||
| High Level Supply Current | ICCH | 10 | mA | IF = 0mA, VE = 0.5 V, VCC = 5.5V; Single Channel | 5 | ||
| Low Level Supply Current | ICCL | 13 | mA | IF = 10mA, VE = 0.5 V, VCC = 5.5V; Single Channel | 5 | ||
| Low Level Enable Current | IEL | -1.6 | mA | VCC = 5.5V, VE = 0.5V; Single Channel | 5 | ||
| High Level Enable Current | IEH | -1.6 | mA | VCC = 5.5V, VE = 2.0V; Single Channel | 5 | ||
| High Level Enable Voltage | VEH | 2 | V | VCC = 5.5V, IF = 10mA; Single Channel | 5 | ||
| Low Level Enable Voltage | VEL | 0.8 | V | VCC = 5.5V, IF = 10mA(2); Single Channel | 5 | ||
| Propagation Delay Time to Output High Level | TPLH | 20 | 75 | ns | RL = 350Ω, CL = 15pF, TA = 25°C (Fig. 20) | 5 | |
| Propagation Delay Time to Output High Level | TPLH | 100 | ns | RL = 350Ω, CL = 15pF (Fig. 20) | 5 | ||
| Propagation Delay Time to Output Low Level | TPHL | 25 | 75 | ns | RL = 350Ω, CL = 15pF, TA = 25°C (Fig. 20) | 5 | |
| Propagation Delay Time to Output Low Level | TPHL | 100 | ns | RL = 350Ω, CL = 15pF (Fig. 20) | 5 | ||
| Pulse Width Distortion | /TPHL-TPLH/ | 35 | ns | RL = 350Ω, CL = 15pF (Fig. 20) | 5 | ||
| Output Rise Time (10-90%) | tr | 50 | ns | RL = 350Ω, CL = 15pF (Fig. 20); Single Ch | 5 | ||
| Output Fall Time (90-10%) | tf | 12 | ns | RL = 350Ω, CL = 15pF (Fig. 20); Single Ch | 5 | ||
| Enable Propagation Delay Time to Output High Level | tELH | 20 | ns | IF = 7.5mA, VEH = 3.5V, RL = 350Ω, CL = 15pF (Fig. 21); HCPL0601 | 5 | ||
| Enable Propagation Delay Time to Output Low Level | tEHL | 20 | ns | IF = 7.5mA, VEH = 3.5V, RL = 350Ω, CL = 15pF (Fig. 21); HCPL0601 | 5 | ||
| Common Mode Transient Immunity (at Output High Level) | /CMH/ | 10000 | V/µs | RL = 350Ω, TA = 25°C, IF = 0mA, VOH (Min.) = 2.0 V, /VCM/ = 50V; HCPL0601 | 5 | ||
| Common Mode Transient Immunity (at Output Low Level) | /CML/ | 10000 | V/µs | RL = 350Ω, TA = 25°C, IF = 7.5mA, VOL (Max.) = 0.8 V, /VCM/ = 50V; HCPL0601 | 5 | ||
| High Level Output Current | IOH | 100 | µA | VCC = 5.5V, VO = 5.5 V, IF = 250µA, VE = 2.0V | 6 | ||
| Low Level Output Voltage | VOL | 0.6 | V | VCC = 5.5V, IF = 5mA, VE = 2.0V, IOL = 13mA | 6 | ||
| Input Threshold Current | IFT | 5 | mA | VCC = 5.5V, VO = 0.6V, VE = 2.0V, IOL = 13mA | 6 | ||
| Input-Output Insulation Leakage Current | II-O | 1 | µA | Relative humidity = 45%, TA = 25°C, t = 5s, VI-O = 3000 VDC | 6 | ||
| Withstand Insulation Test Voltage | VISO | 3750 | VRMS | RH < 50%, TA = 25°C, II-O ≤ 2µA, t = 1 min. | 6 | ||
| Resistance (Input to Output) | RI-O | 1012 | Ω | VI-O = 500V | 6 |
CAD (KiCad official)
- Symbol:
HCPL0601 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
hcpl0601-etched.step/hcpl0601-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl0601.step/hcpl0601.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (20 pp, sha256
8332faf8606cce77, retrieved 2026-11-07, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HCPL0601
**onsemi** · Optocouplers - Logic Output · SOIC-8
HCPL0601 from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection (N/C) shown in the single-channel circuit drawing. |
| 2 | ANODE | input | LED anode (+VF) input; DC forward current IF is 6.3 mA min to 15 mA max recommended, 50 mA absolute maximum, with 5.0 V maximum reverse voltage. |
| 3 | CATHODE | input | LED cathode (-VF) input return; the input is a two-terminal LED with pins 1-4 on the isolated input side. |
| 4 | NC | unconnected | No internal connection (N/C) shown in the single-channel circuit drawing. |
| 5 | GND | power_in | Output-side ground; a 0.1 µF bypass capacitor must be connected between pins 8 and 5. |
| 6 | VO | output | Open-collector logic gate output (allows wired-OR), requires pull-up RL of 330 Ω to 4 kΩ, 7.0 V maximum output voltage and 50 mA maximum output current. |
| 7 | VE | input | Strobe enable input, low level 0 to 0.8 V and high level 2.0 V to VCC (not to exceed VCC by more than 500 mV), has an internal pull-up so it can be left not connected. |
| 8 | VCC | power_in | Supply voltage for the output, 4.5 V to 5.5 V recommended and 7.0 V absolute maximum (1 minute), bypassed with 0.1 µF to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Current, Low Level | IFL | 0 | | 250 | µA | | 4 |
| Input Current, High Level | IFH | 6.3 | | 15 | mA | Printed footnote * (guard banded value) | 4 |
| Supply Voltage, Output | VCC | 4.5 | | 5.5 | V | | 4 |
| Enable Voltage, Low Level | VEL | 0 | | 0.8 | V | Single Channel only | 4 |
| Enable Voltage, High Level | VEH | 2 | | | V | Single Channel only; max printed as VCC | 4 |
| Operating Temperature | TA | -40 | | 85 | °C | | 4 |
| Storage Temperature | TSTG | -40 | | 125 | °C | | 4 |
| Operating Temperature | TOPR | -40 | | 85 | °C | | 4 |
| DC/Average Forward Input Current | IF | | | 50 | mA | Single Channel | 4 |
| Enable Input Voltage | VE | | | 5.5 | V | Single Channel; not to exceed VCC by more than 500mV | 4 |
| Reverse Input Voltage (each channel) | VR | | | 5 | V | each channel | 4 |
| Power Dissipation | PI | | | 45 | mW | Single Channel | 4 |
| Supply Voltage | VCC | | | 7 | V | 1 minute max | 4 |
| Output Current (each channel) | IO | | | 50 | mA | Single Channel | 4 |
| Output Voltage (each channel) | VO | | | 7 | V | each channel | 4 |
| Collector Output Power Dissipation | PO | | | 85 | mW | Single Channel | 4 |
| Input Forward Voltage | VF | | | 1.8 | V | IF = 10mA | 5 |
| Input Reverse Breakdown Voltage | BVR | 5 | | | V | IR = 10µA | 5 |
| High Level Supply Current | ICCH | | | 10 | mA | IF = 0mA, VE = 0.5 V, VCC = 5.5V; Single Channel | 5 |
| Low Level Supply Current | ICCL | | | 13 | mA | IF = 10mA, VE = 0.5 V, VCC = 5.5V; Single Channel | 5 |
| Low Level Enable Current | IEL | | | -1.6 | mA | VCC = 5.5V, VE = 0.5V; Single Channel | 5 |
| High Level Enable Current | IEH | | | -1.6 | mA | VCC = 5.5V, VE = 2.0V; Single Channel | 5 |
| High Level Enable Voltage | VEH | 2 | | | V | VCC = 5.5V, IF = 10mA; Single Channel | 5 |
| Low Level Enable Voltage | VEL | | | 0.8 | V | VCC = 5.5V, IF = 10mA(2); Single Channel | 5 |
| Propagation Delay Time to Output High Level | TPLH | | 20 | 75 | ns | RL = 350Ω, CL = 15pF, TA = 25°C (Fig. 20) | 5 |
| Propagation Delay Time to Output High Level | TPLH | | | 100 | ns | RL = 350Ω, CL = 15pF (Fig. 20) | 5 |
| Propagation Delay Time to Output Low Level | TPHL | | 25 | 75 | ns | RL = 350Ω, CL = 15pF, TA = 25°C (Fig. 20) | 5 |
| Propagation Delay Time to Output Low Level | TPHL | | | 100 | ns | RL = 350Ω, CL = 15pF (Fig. 20) | 5 |
| Pulse Width Distortion | /TPHL-TPLH/ | | | 35 | ns | RL = 350Ω, CL = 15pF (Fig. 20) | 5 |
| Output Rise Time (10-90%) | tr | | | 50 | ns | RL = 350Ω, CL = 15pF (Fig. 20); Single Ch | 5 |
| Output Fall Time (90-10%) | tf | | | 12 | ns | RL = 350Ω, CL = 15pF (Fig. 20); Single Ch | 5 |
| Enable Propagation Delay Time to Output High Level | tELH | | | 20 | ns | IF = 7.5mA, VEH = 3.5V, RL = 350Ω, CL = 15pF (Fig. 21); HCPL0601 | 5 |
| Enable Propagation Delay Time to Output Low Level | tEHL | | | 20 | ns | IF = 7.5mA, VEH = 3.5V, RL = 350Ω, CL = 15pF (Fig. 21); HCPL0601 | 5 |
| Common Mode Transient Immunity (at Output High Level) | /CMH/ | 10000 | | | V/µs | RL = 350Ω, TA = 25°C, IF = 0mA, VOH (Min.) = 2.0 V, /VCM/ = 50V; HCPL0601 | 5 |
| Common Mode Transient Immunity (at Output Low Level) | /CML/ | 10000 | | | V/µs | RL = 350Ω, TA = 25°C, IF = 7.5mA, VOL (Max.) = 0.8 V, /VCM/ = 50V; HCPL0601 | 5 |
| High Level Output Current | IOH | | | 100 | µA | VCC = 5.5V, VO = 5.5 V, IF = 250µA, VE = 2.0V | 6 |
| Low Level Output Voltage | VOL | | | 0.6 | V | VCC = 5.5V, IF = 5mA, VE = 2.0V, IOL = 13mA | 6 |
| Input Threshold Current | IFT | | | 5 | mA | VCC = 5.5V, VO = 0.6V, VE = 2.0V, IOL = 13mA | 6 |
| Input-Output Insulation Leakage Current | II-O | | | 1 | µA | Relative humidity = 45%, TA = 25°C, t = 5s, VI-O = 3000 VDC | 6 |
| Withstand Insulation Test Voltage | VISO | 3750 | | | VRMS | RH < 50%, TA = 25°C, II-O ≤ 2µA, t = 1 min. | 6 |
| Resistance (Input to Output) | RI-O | 1012 | | | Ω | VI-O = 500V | 6 |
## CAD (KiCad official)
- Symbol: `HCPL0601`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `hcpl0601-etched.step` / `hcpl0601-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hcpl0601.step` / `hcpl0601.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/hcpl0601-d.pdf) (20 pp, sha256 `8332faf8606cce77`, retrieved 2026-11-07, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hcpl0601-datasheet.pdf)