component
HCPL-M600-500E
Public Made by Adomby adom
Broadcom AVAGO Logic Output Optoisolators, SOP-5-175mil. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHCPL-M600-500E
Broadcom AVAGO · Logic Output Optoisolators · SOP-5-175mil
HCPL-M600-500E from Broadcom AVAGO, in a SOP-5-175mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CATHODE | passive | Cathode of the input LED, which is tied to pin 3 (anode) and is rated for a 20 mA maximum forward input current and 5 V maximum reverse input voltage. |
| 3 | ANODE | input | Anode of the input LED; the datasheet recommends 6.3 mA to 10 mA drive for best performance, with a 20 mA absolute maximum forward current. |
| 4 | GND | power_in | Ground reference for the output detector IC; bypass VCC (pin 6) to this pin with a 0.1 µF ceramic capacitor placed adjacent to the device, with total lead length not exceeding 10 mm. |
| 5 | VOUT | output | Open-collector Schottky-clamped output that requires a pull-up resistor of 330 Ω to 4 kΩ, with a 7 V maximum output voltage and 50 mA maximum output collector current. |
| 6 | VCC | power_in | Supply voltage for the detector IC, recommended at 4.5 V to 5.5 V with 7 V maximum for 1 minute, and to be bypassed to pin 4 with a 0.1 µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom AVAGO |
| Package | SOP-5-175mil |
| Category | Optoisolators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Current, Low Level | IFL | 0 | 250 | μA | 4 | ||
| Input Current, High Level | IFH | 5 | 15 | mA | 4 | ||
| Supply Voltage, Output | VCC | 4.5 | 5.5 | V | 4 | ||
| Output Pull-Up Resistor | RL | 330 | 4000 | Ω | 4 | ||
| Operating Temperature | TA | -40 | 85 | °C | 4 | ||
| Storage Temperature | -55 | 125 | °C | 5 | |||
| Operating Temperature | -40 | 85 | °C | 5 | |||
| Forward Input Current | IF | 20 | mA | see Note 2 | 5 | ||
| Reverse Input Voltage | VR | 5 | V | 5 | |||
| Supply Voltage | VCC | 7 | V | 1 Minute Maximum | 5 | ||
| Output Collector Current | IO | 50 | mA | 5 | |||
| Output Collector Power Dissipation | 85 | mW | 5 | ||||
| Output Collector Voltage | VO | 7 | V | 5 | |||
| Input Threshold Current | ITH | 2 | 5 | mA | VCC = 5.5 V, IO ≥13 mA, VO = 0.6 V | 6 | |
| High Level Output Current | IOH | 5.5 | 100 | μA | VCC = 5.5 V, VO = 5.5 V, IF = 250 μA | 6 | |
| Low Level Output Voltage | VOL | 0.4 | 0.6 | V | VCC = 5.5 V, IF = 5 mA, IOL (Sinking) = 13 mA | 6 | |
| High Level Supply Current | ICCH | 4 | 7.5 | mA | VCC = 5.5 V, IF = 0 mA | 6 | |
| Low Level Supply Current | ICCL | 6 | 10.5 | mA | VCC = 5.5 V, IF = 10 mA | 6 | |
| Input Forward Voltage | VF | 1.4 | 1.5 | 1.75 | V | TA = 25°C, IF=10 mA | 6 |
| Input Forward Voltage | VF | 1.3 | 1.85 | V | IF = 10 mA | 6 | |
| Input Reverse Breakdown Voltage | BVR | 5 | V | IR = 10 μA | 6 | ||
| Common Mode Transient Immunity at High Output Level (M600) | /CMH/ | 10000 | V/μs | VCM = 10 V, VO(min) = 2 V | 7 | ||
| Common Mode Transient Immunity at Low Output Level (M600) | /CMH/ | 10000 | V/μs | VCM = 10 V, VO(max) = 0.8 V | 7 | ||
| Propagation Delay Time to High Output Level | tPLH | 48 | 75 | ns | TA = 25°C, RL = 350 Ω, CL = 15 pF | 7 | |
| Propagation Delay Time to Low Output Level | tPHL | 50 | 75 | ns | TA = 25°C | 7 | |
| Propagation Delay Skew | tPSK | 40 | ns | 7 | |||
| Pulse Width Distortion | /tPHL - tPLH/ | 3.5 | 35 | ns | 7 |
CAD (KiCad official)
- Symbol:
HCPL-M600-500E - Footprint:
Package_SO:SOIC-5-6_4.4x3.6mm_P1.27mm - 3D model: SOP-5-175mil (KiCad packages3D, STEP)
- 3D model files:
hcpl-m600-500e-etched.step/hcpl-m600-500e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-m600-500e.step/hcpl-m600-500e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom AVAGO datasheet (11 pp, sha256
1edc2bffcbb0fd40, retrieved 2026-10-21, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).