main
Ray
hcpl-4701-500e: CAD wording names the Adom_Gen land, not KiCad official
a1a78fe
HCPL-4701-500E
Broadcom/AVAGO · Transistor, Photovoltaic Output Optoisolators · DIP-8
HCPL-4701-500E from Broadcom/AVAGO, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection on the single-channel HCPL-4701. |
| 2 | ANODE | input | LED anode input; drive with IF(ON) of 40 µA to 5000 µA (reverse input voltage max 2.5 V). |
| 3 | CATHODE | input | LED cathode input; the LED is OFF when VF(OFF) is 0 to 0.8 V. |
| 4 | NC | unconnected | No internal connection on the single-channel HCPL-4701. |
| 5 | GND | power_in | Output-side ground; a 0.1 µF bypass capacitor between pins 8 and 5 is recommended. |
| 6 | VO | output | Open-collector output of the split-Darlington stage (logic low when LED is on, max VOL 0.4 V; absolute max -0.5 to 18 V); tying to VCC gives Darlington operation. |
| 7 | VB | power_in | Photodiode/output transistor base connection (max base current 5 mA); left open for normal single-channel use, and a resistor from pin 7 to pin 5 reduces gain and delay time. |
| 8 | VCC | power_in | Output-side supply voltage, recommended 1.6 V to 18 V, with a 0.1 µF bypass capacitor to pin 5. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom/AVAGO |
| Package | DIP-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic Low Output Voltage | VOL | 0.06 | 0.4 | V | IF = 40 µA, IO = 280 µA | 10 | |
| Logic Low Output Voltage | VOL | 0.04 | 0.4 | V | IF = 0.5 mA, IO = 2.5 mA | 10 | |
| Logic High Output Current | IOH | 0.01 | 5 | µA | VO = VCC = 3 to 7 V, IF = 0 mA | 10 | |
| Logic High Output Current | IOH | 0.02 | 80 | µA | VO = VCC = 18 V, IF = 0 mA | 10 | |
| Logic Low Supply Current | ICCL | 0.02 | 0.2 | mA | IF = 40 µA, VO = Open | 10 | |
| Logic Low Supply Current | ICCL | 0.1 | 1 | mA | IF = 0.5 mA, VO = Open | 10 | |
| Logic High Supply Current | ICCH | 10 | µA | IF = 0 mA, VO = Open; typ <0.01 | 10 | ||
| Input Forward Voltage | VF | 1.1 | 1.25 | 1.4 | V | IF = 40 to 500 µA, TA = 25°C | 10 |
| Input Forward Voltage | VF | 0.95 | 1.5 | V | IF = 40 to 500 µA | 10 | |
| Input Reverse Breakdown Voltage | BVR | 3 | 5 | V | IR = 100 µA, TA = 25°C | 10 | |
| Input Reverse Breakdown Voltage | BVR | 2.5 | V | IR = 100 µA | 10 | ||
| Temperature Coefficient of Forward Voltage | ∆VF/∆TA | -2 | mV/°C | IF = 40 µA | 10 | ||
| Temperature Coefficient of Forward Voltage | ∆VF/∆TA | -1.6 | mV/°C | IF = 0.5 mA | 10 | ||
| Input Capacitance | CIN | 18 | pF | f = 1 MHz, VF = 0 V | 10 | ||
| Input-Output Momentary Withstand Voltage | VISO | 3750 | V rms | RH ≤ 50%, t = 1 min. | 11 | ||
| Input-Output Capacitance | CI-O | 0.6 | pF | f = 1 MHz | 11 | ||
| Propagation Delay Time to Logic Low | tPHL | 65 | 500 | µs | IF = 40 µA, RL = 11 to 16 kΩ, VCC = 3.3 to 5 V | 11 | |
| Propagation Delay Time to Logic High | tPLH | 70 | 500 | µs | IF = 40 µA, RL = 11 to 16 kΩ, VCC = 3.3 to 5 V | 11 | |
| Common Mode Transient Immunity at Logic High Output | /CMH/ | 1000 | 10000 | V/µs | IF = 0 mA, RL = 4.7 to 11 kΩ, VCM = 10 Vp-p, TA = 25°C | 11 | |
| Common Mode Transient Immunity at Logic Low Output | /CML/ | 1000 | 10000 | V/µs | IF = 0.5 mA, RL = 4.7 to 11 kΩ, /VCM/ = 10 Vp-p, TA = 25°C | 11 | |
| Storage Temperature | TS | -55 | 125 | °C | 9 | ||
| Operating Temperature | TA | -40 | 85 | °C | 9 | ||
| Average Forward Input Current | IF(AVG) | 10 | mA | HCPL-4701/4731 | 9 | ||
| Peak Transient Input Current | IFPK | 20 | mA | 50% Duty Cycle, 1 ms Pulse Width, HCPL-4701/4731 | 9 | ||
| Reverse Input Voltage | VR | 2.5 | V | 9 | |||
| Input Power Dissipation (Each Channel) | PI | 15 | mW | 9 | |||
| Output Current (Each Channel) | IO | 60 | mA | 9 | |||
| Emitter Base Reverse Voltage | VEB | 0.5 | V | HCPL-4701/070A | 9 | ||
| Output Transistor Base Current | IB | 5 | mA | HCPL-4701/070A | 9 | ||
| Supply Voltage | VCC | -0.5 | 18 | V | 9 | ||
| Output Voltage | VO | -0.5 | 18 | V | 9 | ||
| Output Power Dissipation (Each Channel) | PO | 100 | mW | 9 | |||
| Total Power Dissipation (Each Channel) | PT | 115 | mW | 9 | |||
| Power Supply Voltage | VCC | 1.6 | 18 | V | See Note 1 | 9 | |
| Forward Input Current (ON) | IF(ON) | 40 | 5000 | µA | 9 | ||
| Forward Input Voltage (OFF) | VF(OFF) | 0 | 0.8 | V | 9 | ||
| Operating Temperature | TA | 0 | 70 | °C | 9 |
CAD (Adom-generated)
- Symbol:
HCPL-4701-500E - Footprint:
Adom_Gen:Broadcom_AVAGO_HCPL-470_39c9e6 - 3D model: generated to fit the land (STEP)
- 3D model files:
hcpl-4701-500e-etched.step/hcpl-4701-500e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-4701-500e.step/hcpl-4701-500e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom/AVAGO datasheet (17 pp, sha256
61ff4b0d0a0b207b, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
# HCPL-4701-500E
**Broadcom/AVAGO** · Transistor, Photovoltaic Output Optoisolators · DIP-8
HCPL-4701-500E from Broadcom/AVAGO, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection on the single-channel HCPL-4701. |
| 2 | ANODE | input | LED anode input; drive with IF(ON) of 40 µA to 5000 µA (reverse input voltage max 2.5 V). |
| 3 | CATHODE | input | LED cathode input; the LED is OFF when VF(OFF) is 0 to 0.8 V. |
| 4 | NC | unconnected | No internal connection on the single-channel HCPL-4701. |
| 5 | GND | power_in | Output-side ground; a 0.1 µF bypass capacitor between pins 8 and 5 is recommended. |
| 6 | VO | output | Open-collector output of the split-Darlington stage (logic low when LED is on, max VOL 0.4 V; absolute max -0.5 to 18 V); tying to VCC gives Darlington operation. |
| 7 | VB | power_in | Photodiode/output transistor base connection (max base current 5 mA); left open for normal single-channel use, and a resistor from pin 7 to pin 5 reduces gain and delay time. |
| 8 | VCC | power_in | Output-side supply voltage, recommended 1.6 V to 18 V, with a 0.1 µF bypass capacitor to pin 5. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom/AVAGO |
| Package | DIP-8 |
| Category | Optoisolators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic Low Output Voltage | VOL | | 0.06 | 0.4 | V | IF = 40 µA, IO = 280 µA | 10 |
| Logic Low Output Voltage | VOL | | 0.04 | 0.4 | V | IF = 0.5 mA, IO = 2.5 mA | 10 |
| Logic High Output Current | IOH | | 0.01 | 5 | µA | VO = VCC = 3 to 7 V, IF = 0 mA | 10 |
| Logic High Output Current | IOH | | 0.02 | 80 | µA | VO = VCC = 18 V, IF = 0 mA | 10 |
| Logic Low Supply Current | ICCL | | 0.02 | 0.2 | mA | IF = 40 µA, VO = Open | 10 |
| Logic Low Supply Current | ICCL | | 0.1 | 1 | mA | IF = 0.5 mA, VO = Open | 10 |
| Logic High Supply Current | ICCH | | | 10 | µA | IF = 0 mA, VO = Open; typ <0.01 | 10 |
| Input Forward Voltage | VF | 1.1 | 1.25 | 1.4 | V | IF = 40 to 500 µA, TA = 25°C | 10 |
| Input Forward Voltage | VF | 0.95 | | 1.5 | V | IF = 40 to 500 µA | 10 |
| Input Reverse Breakdown Voltage | BVR | 3 | 5 | | V | IR = 100 µA, TA = 25°C | 10 |
| Input Reverse Breakdown Voltage | BVR | 2.5 | | | V | IR = 100 µA | 10 |
| Temperature Coefficient of Forward Voltage | ∆VF/∆TA | | -2 | | mV/°C | IF = 40 µA | 10 |
| Temperature Coefficient of Forward Voltage | ∆VF/∆TA | | -1.6 | | mV/°C | IF = 0.5 mA | 10 |
| Input Capacitance | CIN | | 18 | | pF | f = 1 MHz, VF = 0 V | 10 |
| Input-Output Momentary Withstand Voltage | VISO | 3750 | | | V rms | RH ≤ 50%, t = 1 min. | 11 |
| Input-Output Capacitance | CI-O | | 0.6 | | pF | f = 1 MHz | 11 |
| Propagation Delay Time to Logic Low | tPHL | | 65 | 500 | µs | IF = 40 µA, RL = 11 to 16 kΩ, VCC = 3.3 to 5 V | 11 |
| Propagation Delay Time to Logic High | tPLH | | 70 | 500 | µs | IF = 40 µA, RL = 11 to 16 kΩ, VCC = 3.3 to 5 V | 11 |
| Common Mode Transient Immunity at Logic High Output | /CMH/ | 1000 | 10000 | | V/µs | IF = 0 mA, RL = 4.7 to 11 kΩ, VCM = 10 Vp-p, TA = 25°C | 11 |
| Common Mode Transient Immunity at Logic Low Output | /CML/ | 1000 | 10000 | | V/µs | IF = 0.5 mA, RL = 4.7 to 11 kΩ, /VCM/ = 10 Vp-p, TA = 25°C | 11 |
| Storage Temperature | TS | -55 | | 125 | °C | | 9 |
| Operating Temperature | TA | -40 | | 85 | °C | | 9 |
| Average Forward Input Current | IF(AVG) | | | 10 | mA | HCPL-4701/4731 | 9 |
| Peak Transient Input Current | IFPK | | | 20 | mA | 50% Duty Cycle, 1 ms Pulse Width, HCPL-4701/4731 | 9 |
| Reverse Input Voltage | VR | | | 2.5 | V | | 9 |
| Input Power Dissipation (Each Channel) | PI | | | 15 | mW | | 9 |
| Output Current (Each Channel) | IO | | | 60 | mA | | 9 |
| Emitter Base Reverse Voltage | VEB | | | 0.5 | V | HCPL-4701/070A | 9 |
| Output Transistor Base Current | IB | | | 5 | mA | HCPL-4701/070A | 9 |
| Supply Voltage | VCC | -0.5 | | 18 | V | | 9 |
| Output Voltage | VO | -0.5 | | 18 | V | | 9 |
| Output Power Dissipation (Each Channel) | PO | | | 100 | mW | | 9 |
| Total Power Dissipation (Each Channel) | PT | | | 115 | mW | | 9 |
| Power Supply Voltage | VCC | 1.6 | | 18 | V | See Note 1 | 9 |
| Forward Input Current (ON) | IF(ON) | 40 | | 5000 | µA | | 9 |
| Forward Input Voltage (OFF) | VF(OFF) | 0 | | 0.8 | V | | 9 |
| Operating Temperature | TA | 0 | | 70 | °C | | 9 |
## CAD (Adom-generated)
- Symbol: `HCPL-4701-500E`
- Footprint: `Adom_Gen:Broadcom_AVAGO_HCPL-470_39c9e6`
- 3D model: generated to fit the land (STEP)
- 3D model files: `hcpl-4701-500e-etched.step` / `hcpl-4701-500e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hcpl-4701-500e.step` / `hcpl-4701-500e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Broadcom/AVAGO datasheet](docs/hcpl-4701-500e-datasheet.pdf) (17 pp, sha256 `61ff4b0d0a0b207b`, retrieved 2026-10-31, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
[Datasheet PDF](docs/hcpl-4701-500e-datasheet.pdf)