3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHCPL-4701-000E
Broadcom/AVAGO · Transistor Output Optocoupler · DIP-8
HCPL-4701-000E from Broadcom/AVAGO, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Marked NC (no connection) on the HCPL-4701 pin listing and not used by the single-channel package. |
| 2 | ANODE | passive | LED anode input; the datasheet specifies an input forward current (ON) of 40 µA to 5000 µA and a maximum reverse input voltage of 2.5 V. |
| 3 | CATHODE | passive | LED cathode input; the input forward voltage is 1.1 V typical at 40 µA and 1.4 V maximum over 40 to 500 µA at 25°C. |
| 4 | NC | unconnected | Marked NC (no connection) on the HCPL-4701 pin listing and not used by the single-channel package. |
| 5 | GND | power_in | Ground reference for the output stage; a 0.1 µF bypass capacitor between pins 8 and 5 is recommended. |
| 6 | VO | output | Open-collector output that is TTL and CMOS compatible; the absolute maximum output voltage is -0.5 V to 18 V and the maximum output current is 60 mA per channel. |
| 7 | VB | power_in | Output transistor base, left open for the single-channel HCPL-4701 (note 9); the output transistor base current is rated at 5 mA maximum. |
| 8 | VCC | power_in | Supply voltage with a recommended operating range of 1.6 V to 18 V; VCC and VO may be tied together for Darlington operation on the single-channel package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom/AVAGO |
| Package | DIP-8 |
| Category | Optocoupler |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VCC | 1.6 | 18 | V | 9 | ||
| Forward Input Current (ON) | IF(ON) | 40 | 5000 | µA | 9 | ||
| Forward Input Voltage (OFF) | VF(OFF) | 0 | 0.8 | V | 9 | ||
| Operating Temperature | TA | 0 | 70 | °C | 9 | ||
| Storage Temperature | TS | -55 | 125 | °C | 9 | ||
| Operating Temperature | TA | -40 | 85 | °C | 9 | ||
| Average Forward Input Current (HCPL-4701/4731) | IF(AVG) | 10 | mA | 9 | |||
| Peak Transient Input Current (HCPL-4701/4731) | IFPK | 20 | mA | 50% Duty Cycle, 1 ms Pulse Width | 9 | ||
| Reverse Input Voltage | VR | 2.5 | V | 9 | |||
| Input Power Dissipation (Each Channel) | PI | 15 | mW | Each Channel | 9 | ||
| Output Current (Each Channel) | IO | 60 | mA | Each Channel | 9 | ||
| Emitter Base Reverse Voltage (HCPL-4701/070A) | VEB | 0.5 | V | 9 | |||
| Output Transistor Base Current (HCPL-4701/070A) | IB | 5 | mA | 9 | |||
| Supply Voltage | VCC | -0.5 | 18 | V | 9 | ||
| Output Voltage | VO | -0.5 | 18 | V | 9 | ||
| Output Power Dissipation (Each Channel) | PO | 100 | mW | Each Channel | 9 | ||
| Total Power Dissipation (Each Channel) | PT | 115 | mW | Each Channel | 9 | ||
| Logic Low Output Voltage | VOL | 0.06 | 0.4 | V | IF = 40 µA, IO = 280 µA | 10 | |
| Logic Low Output Voltage | VOL | 0.04 | 0.4 | V | IF = 0.5 mA, IO = 2.5 mA | 10 | |
| Logic High Output Current | IOH | 0.01 | 5 | µA | VO = VCC = 3 to 7 V, IF = 0 mA | 10 | |
| Logic High Output Current | IOH | 0.02 | 80 | µA | VO = VCC = 18 V, IF = 0 mA | 10 | |
| Logic Low Supply Current (4701/070A) | ICCL | 0.02 | 0.2 | mA | IF = 40 µA, VO = Open | 10 | |
| Logic Low Supply Current (4701/070A) | ICCL | 0.1 | 1 | mA | IF = 0.5 mA | 10 | |
| Logic High Supply Current (4701/070A) | ICCH | 10 | µA | IF = 0 mA, VO = Open | 10 | ||
| Input Forward Voltage | VF | 1.1 | 1.25 | 1.4 | V | IF = 40 to 500 µA, TA = 25°C | 10 |
| Input Forward Voltage | VF | 0.95 | 1.5 | V | IF = 40 to 500 µA | 10 | |
| Input Reverse Breakdown Voltage | BVR | 3 | 5 | V | IR = 100 µA, TA = 25°C | 10 | |
| Input Reverse Breakdown Voltage | BVR | 2.5 | V | IR = 100 µA | 10 | ||
| Input-Output Momentary Withstand Voltage | VISO | 3750 | V rms | RH ≤ 50%, t = 1 min. | 11 | ||
| Common Mode Transient Immunity at Logic High Output | /CMH/ | 1000 | 10000 | V/µs | IF = 0 mA, RL = 4.7 to 11 kΩ, VCM = 10 Vp-p, TA = 25°C | 11 | |
| Common Mode Transient Immunity at Logic Low Output | /CML/ | 1000 | 10000 | V/µs | IF = 0.5 mA, RL = 4.7 to 11 kΩ, /VCM/ = 10 Vp-p, TA = 25°C | 11 | |
| Common Mode Transient Immunity at Logic Low Output | /CML/ | 2000 | V/µs | IF = 40 µA, RL = 11 to 16 kΩ, /VCM/ = 10 Vp-p, VCC = 3.3 to 5 V, TA = 25°C | 11 | ||
| Propagation Delay Time to Logic Low Output | tPHL | 65 | 500 | µs | IF = 40 µA, RL = 11 to 16 kΩ, VCC = 3.3 to 5 V | 11 | |
| Propagation Delay Time to Logic High Output | tPLH | 70 | 500 | µs | IF = 40 µA, RL = 11 to 16 kΩ, VCC = 3.3 to 5 V | 11 | |
| Propagation Delay Time to Logic High Output | tPLH | 34 | 60 | µs | IF = 0.5 mA, TA = 25°C | 11 | |
| Temperature Coefficient of Forward Voltage | ∆VF/∆TA | -2 | mV/°C | IF = 40 µA | 10 | ||
| Temperature Coefficient of Forward Voltage | ∆VF/∆TA | -1.6 | mV/°C | IF = 0.5 mA | 10 | ||
| Input Capacitance | CIN | 18 | pF | f = 1 MHz, VF = 0 V | 10 | ||
| Input-Output Capacitance | CI-O | 0.6 | pF | f = 1 MHz | 11 |
CAD (KiCad official)
- Symbol:
HCPL-4701-000E - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
hcpl-4701-000e-etched.step/hcpl-4701-000e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-4701-000e.step/hcpl-4701-000e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom/AVAGO datasheet (17 pp, sha256
5c32b82a508330c3, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).