Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HCPL-4506-300E

Broadcom Limited · Logic Output Optoisolators · DIP-8

HCPL-4506-300E from Broadcom Limited, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 NC unconnected Pin 1 is not connected internally and is shown as NC in the functional diagram.
2 ANODE input Pin 2 is the anode of the input LED, which is optically coupled to the integrated photo detector.
3 CATHODE passive Pin 3 is the cathode of the input LED, which is optically coupled to the integrated photo detector.
4 NC unconnected Pin 4 is not connected internally and is shown as NC in the functional diagram.
5 GND power_in Pin 5 is the ground reference of the output stage, as labelled GND in the functional diagram.
6 VO output Pin 6 is the detector output, which goes HIGH when the LED is ON and LOW when it is OFF; shorting it to pin 7 enables the on-chip 20-kΩ pull-up.
7 VL power_in Pin 7 is the detector logic supply pin, shorted to pin 6 to enable the on-chip 20-kΩ output pull-up.
8 VCC power_in Pin 8 is the detector supply, which requires a 0.1-µF bypass capacitor connected between VCC and VEE per the datasheet note.

Key specifications

Parameter Value
Manufacturer Broadcom Limited
Package DIP-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature TS -55 125 °C 10
Operating Temperature TA -40 100 °C 10
Average Input Current IF(AVG) 25 mA 10
Peak Input Current IF(PEAK) 50 mA 50% duty cycle, ≤1 ms pulse width 10
Peak Transient Input Current IF(TRAN) 1 A <1 µs pulse width, 300 pps 10
Reverse Input Voltage (Pin 3 to 2) HCPL-4506, HCPL-0466 VR 5 V 10
Average Output Current (Pin 6) IO(AVG) 15 mA 10
Resistor Voltage (Pin 7) V7 -0.5 V Max printed as VCC 10
Output Voltage (Pin 6 to 5) VO -0.5 30 V 10
Supply Voltage (Pin 8 to 5) VCC -0.5 30 V 10
Output Power Dissipation PO 100 mW 10
Total Power Dissipation PT 145 mW 10
Power Supply Voltage VCC 4.5 30 V 10
Output Voltage VO 0 30 V 10
Input Current (ON) IF(ON) 10 20 mA 10
Input Voltage (OFF) VF(OFF) -5 0.8 V 10
Operating Temperature TA -40 100 °C 10
Current Transfer Ratio CTR 44 90 % IF = 10 mA, VO = 0.6V 11
Low Level Output Current IOL 4.4 9 mA IF = 10 mA, VO = 0.6V 11
Low Level Output Voltage VOL 0.3 0.6 V IO = 2.4 mA 11
Input Threshold Current (HCPL-4506, HCPL-0466, HCNW4506) ITH 1.5 5 mA VO = 0.8V, IO = 0.75 mA 11
High Level Output Current IOH 5 50 µA VF = 0.8V 11
High Level Supply Current ICCH 0.6 1.3 mA VF = 0.8V, VO = Open 11
Low Level Supply Current ICCL 0.6 1.3 mA IF = 10 mA, VO = Open 11
Input Forward Voltage (HCPL-4506, HCPL-0466) VF 1.5 1.8 V IF = 10 mA 11
Temperature Coefficient of Forward Voltage (HCPL-4506, HCPL-0466) ΔVF/ΔTA -1.6 mV/°C IF = 10 mA 11
Input Reverse Breakdown Voltage (HCPL-4506, HCPL-0466) BVR 5 V VIR = 10 µA 11
Input Capacitance (HCPL-4506, HCPL-0466) CIN 60 pF f = 1 MHz, VF = 0V 11
Internal Pull-up Resistor RL 14 20 25 kΩ TA = 25°C 11
Internal Pull-up Resistor Temperature Coefficient ∆RL/∆TA 0.014 kΩ/°C 11
Propagation Delay (external RL) tPHL 30 200 400 ns CL = 100 pF IF(on) = 10 mA, VF(off) = 0.8V, VCC = 15.0V, VTHLH = 2.0V, VTHHL = 1.5V 12
Propagation Delay (external RL) tPLH 270 400 550 ns CL = 100 pF 12
Pulse Width Distortion (external RL) PWD 200 450 ns CL = 100 pF 12
Propagation Delay Difference Between Any 2 Parts (external RL) tPLH, tPHL -150 200 450 ns 12
Output High Level Common Mode Transient Immunity (external RL) /CMH/ 15 30 kV/µs IF = 0 mA, VO > 3.0V, VCC = 15.0V, CL = 100 pF, VCM = 1500 Vp-p, TA = 25°C 12
Output Low Level Common Mode Transient Immunity (external RL) /CML/ 15 30 kV/µs IF = 10 mA VO < 1.0V 12
Propagation Delay (internal RL) TPHL 20 200 400 ns IF(on) = 10 mA, VF(off) = 0.8V, VCC = 15.0V, CL = 100 pF, VTHLH = 2.0V, VTHHL = 1.5V 13
Propagation Delay (internal RL) tPLH 220 450 650 ns 13
Pulse Width Distortion (internal RL) PWD 250 500 ns 13
Propagation Delay Difference Between Any 2 Parts (internal RL) tPLH, tPHL -150 250 500 ns 13
Output High Level Common Mode Transient Immunity (internal RL) /CMH/ 30 kV/µs IF = 0 mA, VO > 3.0V, VCC = 15.0V, CL = 100 pF, VCM = 1500 Vp-p, TA = 25°C 13
Output Low Level Common Mode Transient Immunity (internal RL) /CML/ 30 kV/µs IF = 16 mA, VO < 1.0V 13
Power Supply Rejection PSR 1 Vp-p Square Wave, tRISE, tFALL > 5 ns, no bypass capacitors 13
Input-Output Momentary Withstand Voltage (HCPL-4506, HCPL-0466) VISO 3750 Vrms RH < 50%, t = 1 min., TA = 25°C 14
Capacitance (Input-Output) (HCPL-4506, HCPL-0466) CI-O 0.6 pF f = 1 MHz 14

CAD (Adom-generated)

  • Symbol: HCPL-4506-300E
  • Footprint: Adom_Gen:Broadcom_Limited_HCPL-450_39c9e6
  • 3D model: generated to fit the land (STEP)
  • 3D model files: hcpl-4506-300e-etched.step / hcpl-4506-300e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcpl-4506-300e.step / hcpl-4506-300e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom Limited datasheet (23 pp, sha256 6a8b68367e6ac48f, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF