component
HCPL-4506-000E
Public Made by Adomby adom
Broadcom AVAGO Logic Output Optoisolators, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHCPL-4506-000E
Broadcom AVAGO · Logic Output Optoisolators · DIP-8
HCPL-4506-000E from Broadcom AVAGO, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; the datasheet says pins 1 and 4 should be tied to input circuit common for the recommended LED drive, or left unconnected if output-side direct coupling limits CMR. |
| 2 | ANODE | input | LED anode input; the absolute maximum reverse input voltage (pin 3-2) is 5 V for HCPL-4506, and the recommended ON input current IF(on) is 10 mA to 20 mA. |
| 3 | CATHODE | input | LED cathode input; the recommended OFF input voltage VF(off) is -5 V to 0.8 V, and the recommended LED drive circuit places the current-setting resistor in series with this cathode. |
| 4 | NC | unconnected | No internal connection; the datasheet says pins 1 and 4 should be tied to input circuit common for the recommended LED drive, or left unconnected if output-side direct coupling limits CMR. |
| 5 | GND | power_in | Ground reference for the output and supply, with a 0.1 µF bypass capacitor recommended between pins 5 and 8; the output voltage (pin 6-5) and supply voltage (pin 8-5) are both referenced to this pin. |
| 6 | VO | output | Open-collector detector output referenced to pin 5, rated for output voltage 0 V to 30 V and average output current of 15 mA maximum. |
| 7 | VL | passive | Terminal of the internal 20 kΩ pull-up resistor (14 kΩ min, 20 kΩ typ, 25 kΩ max at TA = 25°C), which is enabled by shorting pins 6 and 7; resistor voltage V7 is limited to -0.5 V to VCC. |
| 8 | VCC | power_in | Supply voltage pin, with recommended operation from 4.5 V to 30 V and absolute maximum supply voltage (pin 8-5) of -0.5 V to 30 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom AVAGO |
| Package | DIP-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VCC | 4.5 | 30 | Volts | 11 | ||
| Output Voltage | VO | 0 | 30 | Volts | 11 | ||
| Input Current (ON) | IF(on) | 10 | 20 | mA | 11 | ||
| Input Voltage (OFF) | VF(off) | -5 | 0.8 | V | 11 | ||
| Operating Temperature | TA | -40 | 100 | °C | 11 | ||
| Storage Temperature | TS | -55 | 125 | °C | 11 | ||
| Operating Temperature | TA | -40 | 100 | °C | 11 | ||
| Peak Transient Input Current | IF(tran) | 1 | A | <1 µs pulse width, 300 pps | 11 | ||
| Peak Input Current | IF(peak) | 50 | mA | 50% duty cycle, ≤1 ms pulse width | 11 | ||
| Average Input Current | IF(avg) | 25 | mA | 11 | |||
| Reverse Input Voltage (Pin 3-2), HCPL-4506 | VR | 5 | Volts | 11 | |||
| Average Output Current (Pin 6) | IO(avg) | 15 | mA | 11 | |||
| Resistor Voltage (Pin 7) | V7 | -0.5 | Volts | 11 | |||
| Output Voltage (Pin 6-5) | VO | -0.5 | 30 | Volts | 11 | ||
| Supply Voltage (Pin 8-5) | VCC | -0.5 | 30 | Volts | 11 | ||
| Output Power Dissipation | PO | 100 | mW | 11 | |||
| Total Power Dissipation | PT | 145 | mW | 11 | |||
| Lead Solder Temperature (HCPL-4506) | 260 | °C | 10 s, 1.6 mm below seating plane | 11 | |||
| Current Transfer Ratio | CTR | 44 | 90 | % | IF = 10 mA, VO = 0.6 V | 12 | |
| Low Level Output Current | IOL | 4.4 | 9 | mA | IF = 10 mA, VO = 0.6 V | 12 | |
| Low Level Output Voltage | VOL | 0.3 | 0.6 | V | IO = 2.4 mA | 12 | |
| Input Threshold Current (HCPL-4506) | ITH | 1.5 | 5 | mA | VO = 0.8 V | 12 | |
| High Level Output Current | IOH | 5 | 50 | µA | VF = 0.8 V | 12 | |
| High Level Supply Current | ICCH | 0.6 | 1.3 | mA | VF = 0.8 V, VO = Open | 12 | |
| Low Level Supply Current | ICCL | 0.6 | 1.3 | mA | IF = 10 mA, VO = Open | 12 | |
| Input Forward Voltage (HCPL-4506) | VF | 1.5 | 1.8 | V | IF = 10 mA | 12 | |
| Input Reverse Breakdown Voltage (HCPL-4506) | BVR | 5 | V | IR = 10 µA | 12 | ||
| Internal Pull-up Resistor | RL | 14 | 20 | 25 | kΩ | TA = 25°C | 12 |
| Propagation Delay Time to Logic Low at Output (internal 20 kΩ RL) | tPHL | 20 | 200 | 400 | ns | IF(on) = 10 mA, VF(off) = 0.8 V, VCC = 15.0 V, CL = 100 pF, VTHLH = 2.0 V, VTHHL = 1.5 V | 13 |
| Propagation Delay Time to High Output Level (internal 20 kΩ RL) | tPLH | 220 | 450 | 650 | ns | 13 | |
| Pulse Width Distortion (internal 20 kΩ RL) | PWD | 250 | 500 | ns | 13 | ||
| Propagation Delay Difference Between Any 2 Parts (internal 20 kΩ RL) | tPLH-tPHL | -150 | 250 | 500 | ns | 13 | |
| Output High Level Common Mode Transient Immunity (internal 20 kΩ RL) | /CMH/ | 30 | kV/µs | IF = 0 mA, VCC = 15.0 V, CL = 100 pF, VCM = 1500 Vp-p | 13 | ||
| Output Low Level Common Mode Transient Immunity (internal 20 kΩ RL) | /CML/ | 30 | kV/µs | IF = 16 mA, TA = 25°C | 13 | ||
| Propagation Delay Time to Logic Low at Output (external 20 kΩ RL) | TPHL | 30 | 200 | 400 | ns | CL = 100 pF, IF(on) = 10 mA, VF(off) = 0.8 V, VCC = 15.0 V | 13 |
| Propagation Delay Time to High Output Level (external 20 kΩ RL) | TPLH | 270 | 400 | 550 | ns | CL = 100 pF, VTHLH = 2.0 V, VTHHL = 1.5 V | 13 |
| Pulse Width Distortion (external 20 kΩ RL) | PWD | 200 | 450 | ns | CL = 100 pF | 13 | |
| Propagation Delay Difference Between Any 2 Parts (external 20 kΩ RL) | tPLH-tPHL | -150 | 200 | 450 | ns | 13 | |
| Output High Level Common Mode Transient Immunity (external 20 kΩ RL) | /CMH/ | 15 | 30 | kV/µs | IF = 0 mA, VCC = 15.0 V, CL = 100 pF, VCM = 1500 Vp-p | 13 | |
| Output Low Level Common Mode Transient Immunity (external 20 kΩ RL) | /CML/ | 15 | 30 | kV/µs | IF = 10 mA, TA = 25°C | 13 | |
| Input-Output Momentary Withstand Voltage (HCPL-4506) | VISO | 3750 | V rms | RH < 50%, t = 1 min. | 14 | ||
| Capacitance (Input-Output) (HCPL-4506) | CI-O | 0.6 | pF | f = 1 MHz | 14 | ||
| Temperature Coefficient of Forward Voltage (HCPL-4506) | ∆VF/∆TA | -1.6 | mV/°C | IF = 10 mA | 12 | ||
| Internal Pull-up Resistor Temperature Coefficient | ∆RL/∆TA | 0.014 | kΩ/°C | 12 | |||
| Input Capacitance (HCPL-4506) | CIN | 60 | pF | f = 1 MHz, VF = 0 V | 12 |
CAD (KiCad official)
- Symbol:
HCPL-4506-000E - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
hcpl-4506-000e-etched.step/hcpl-4506-000e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-4506-000e.step/hcpl-4506-000e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom AVAGO datasheet (21 pp, sha256
fffe9469b2ecde73, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).