main
Ray Publish 0.1.0 8276fff

HCPL-263L-000E

Broadcom Limited · Logic Output Optocoupler · DIP-8

HCPL-263L-000E from Broadcom Limited, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ANODE 1 passive Channel 1 LED anode; recommended forward current 5 to 15 mA (average absolute maximum 15 mA per channel on dual parts).
2 CATHODE 1 passive Channel 1 LED cathode, returned to the input-side ground; reverse input voltage must not exceed 5 V.
3 CATHODE 2 passive Channel 2 LED cathode, returned to the input-side ground; reverse input voltage must not exceed 5 V.
4 ANODE 2 passive Channel 2 LED anode; recommended forward current 5 to 15 mA (average absolute maximum 15 mA per channel on dual parts).
5 GND power_in Output-side ground reference for the detector IC and both open-collector outputs.
6 VO2 output Channel 2 open-collector Schottky-clamped output, needs a pull-up RL of 330 Ω to 4 kΩ; output collector voltage max 7 V and sink current max 50 mA.
7 VO1 output Channel 1 open-collector Schottky-clamped output, needs a pull-up RL of 330 Ω to 4 kΩ; output collector voltage max 7 V and sink current max 50 mA.
8 VCC power_in Output-side supply, recommended 2.7 to 3.6 V or 4.5 to 5.5 V (7 V absolute maximum for 1 minute), with a 0.1 µF ceramic bypass capacitor to GND.

Key specifications

Parameter Value
Manufacturer Broadcom Limited
Package DIP-8
Category Optocoupler
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature TS -55 125 °C 8
Operating Temperature TA -40 85 °C 8
Average Forward Input Current (each channel, dual) IF 15 mA Dual 8-Pin DIP, each channel 8
Reverse Input Voltage VR 5 V 8-Pin DIP, each channel 8
Input Power Dissipation PI 40 mW 8
Supply Voltage (1 Minute Maximum) VCC 7 V 1 minute maximum 8
Output Collector Current IO 50 mA each channel 8
Output Collector Voltage VO 7 V each channel 8
Output Collector Power Dissipation (dual) PO 60 mW Dual 8-Pin DIP, each channel 8
Input Current, Low Level IFL 0 250 µA 9
Input Current, High Level IFH 5 15 mA each channel 9
Power Supply Voltage (3.3V range) VCC 2.7 3.6 V 9
Power Supply Voltage (5V range) VCC 4.5 5.5 V 9
Operating Temperature TA -40 85 °C 9
Fan Out N 5 TTL Loads at RL = 1 kΩ 9
Output Pull-up Resistor RL 330 4 Ω max printed as 4 k 9
High Level Output Current (3.3V) IOH 4.5 50 µA VCC = 3.3V, VO = 3.3V, IF = 250 µA 10
Input Threshold Current (3.3V) ITH 3 5 mA VCC = 3.3V, VO = 0.6 V, IOL (Sinking) = 13 mA 10
Low Level Output Voltage (3.3V) VOL 0.35 0.6 V VCC = 3.3V, IF = 5 mA, IOL (Sinking) = 13 mA 10
High Level Supply Current (3.3V, dual) ICCH 6.9 10 mA Dual, IF = 0 mA, VCC = 3.3V 10
Low Level Supply Current (3.3V, dual) ICCL 8.7 15 mA Dual, IF = 10 mA, VCC = 3.3V 10
Input Forward Voltage (3.3V) VF 1.4 1.5 1.75 V TA = 25°C, IF = 10 mA 10
Input Reverse Breakdown Voltage (3.3V) BVR 5 V IR = 10 µA 10
Input Diode Temperature Coefficient (3.3V) ΔVF/ΔTA -1.6 mV/°C IF = 10 mA 10
Input Capacitance (3.3V) CIN 60 pF f = 1 MHz, VF = 0V 10
High Level Output Current (5V) IOH 5.5 100 µA VCC = 5.5V, VO = 5.5V, IFL = 250 µA 11
Input Threshold Current (5V, dual) ITH 2.5 mA Dual, VCC = 5.5V, VO = 0.6V, IOL > 13 mA 11
Low Level Output Voltage (5V) VOL 0.35 0.6 V VCC = 5.5V, IF = 5 mA, IOL (Sinking) = 13 mA 11
High Level Supply Current (5V, dual) ICCH 10 15 mA Dual, VCC = 5.5V, IF = 0 mA 11
Low Level Supply Current (5V, dual) ICCL 13 21 mA Dual, VCC = 5.5V, IF = 10 mA 11
Input Forward Voltage (5V) VF 1.4 1.5 1.75 V TA = 25°C, IF = 10 mA 11
Input Forward Voltage (5V, over temperature) VF 1.3 1.8 V IF = 10 mA 11
Input Reverse Breakdown Voltage (5V) BVR 5 V IR = 10 µA 11
Input Diode Temperature Coefficient (5V) ΔVF/ΔTA -1.6 mV/°C IF = 10 mA 11
Input Capacitance (5V) CIN 60 pF f = 1 MHz, VF = 0V 11
Propagation Delay Time to High Output Level (3.3V) tPLH 90 ns RL = 350Ω, CL = 15 pF, IF = 7.5 mA 12
Propagation Delay Time to Low Output Level (3.3V) tPHL 75 ns RL = 350Ω, CL = 15 pF, IF = 7.5 mA 12
Pulse Width Distortion (3.3V) /tPHL, tPLH/ 25 ns RL = 350Ω, CL = 15 pF 12
Propagation Delay Skew (3.3V) tPSK 40 ns RL = 350Ω, CL = 15 pF 12
Output Rise Time (3.3V) tr 45 ns RL = 350Ω, CL = 15 pF 12
Output Fall Time (3.3V) tf 20 ns RL = 350Ω, CL = 15 pF 12
Propagation Delay Time to High Output Level (5V, 25°C) tPLH 20 48 75 ns TA = 25°C, RL = 350Ω, CL = 15 pF 13
Propagation Delay Time to High Output Level (5V, over temperature) tPLH 100 ns RL = 350Ω, CL = 15 pF, IF = 7.5 mA 13
Propagation Delay Time to Low Output Level (5V, 25°C) tPHL 25 50 75 ns TA = 25°C, RL = 350Ω, CL = 15 pF 13
Propagation Delay Time to Low Output Level (5V, over temperature) tPHL 100 ns RL = 350Ω, CL = 15 pF, IF = 7.5 mA 13
Pulse Width Distortion (5V) /tPHL, tPLH/ 3.5 35 ns RL = 350Ω, CL = 15 pF 13
Propagation Delay Skew (5V) tPSK 40 ns RL = 350Ω, CL = 15 pF 13
Output Rise Time (5V) tr 24 ns RL = 350Ω, CL = 15 pF 13
Output Fall Time (5V) tf 10 ns RL = 350Ω, CL = 15 pF 13
Output High Level Common Mode Transient Immunity (3.3V) /CMH/ 15 25 kV/µs VCC = 3.3V, IF = 0 mA, VO(MIN) = 2V, RL = 350Ω, TA = 25°C, VCM = 1000V and VCM = 10V 14
Output Low Level Common Mode Transient Immunity (3.3V) /CML/ 15 25 kV/µs VCC = 3.3V, IF = 7.5 mA, VO(MAX) = 0.8V, RL = 350Ω, TA = 25°C, VCM = 1000V and VCM = 10V 14
Output High Level Common Mode Transient Immunity (5V) /CMH/ 10 15 kV/µs VCC = 5V, IF = 0 mA, VO(MIN) = 2V, RL = 350 Ω, TA = 25°C, VCM = 1000V 14
Output Low Level Common Mode Transient Immunity (5V) /CML/ 10 15 kV/µs VCC = 5V, IF = 7.5 mA, VO(MAX) = 0.8V, RL = 350Ω, TA = 25°C, VCM = 1000V 14
Input-Output Momentary Withstand Voltage VISO 3750 Vrms RH ≤ 50%, TA = 25°C, t = 1 minute 15
Input-Output Capacitance CI-O 0.6 pF f = 1 MHz, TA = 25°C 15
Input-Input Insulation Leakage Current II-I 0.005 µA RH ≤ 45%, t = 5s, VI-I = 500V 15
Capacitance (Input-Input) CI-I 0.03 pG Dual 8-Pin DIP, f = 1 MHz 15

CAD (KiCad official)

  • Symbol: HCPL-263L-000E
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: hcpl-263l-000e-etched.step / hcpl-263l-000e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcpl-263l-000e.step / hcpl-263l-000e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom Limited datasheet (23 pp, sha256 7c70b88cb45b0ffc, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF