main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hcpl-2630-020e: viewers · Ray
hcpl-2630-020e-etched.glb Publish 0.1.0 · Ray
hcpl-2630-020e-etched.step hcpl-2630-020e: factory component page (tier=lcsc) · Ray
hcpl-2630-020e-hero.glb hcpl-2630-020e: hero GLB from the etched model (keeps the MPN mark) · Ray
hcpl-2630-020e-hero.overlay.json Publish 0.1.0 · Ray
hcpl-2630-020e.glb Publish 0.1.0 · Ray
hcpl-2630-020e.kicad_mod Publish 0.1.0 · Ray
hcpl-2630-020e.kicad_sym Publish 0.1.0 · Ray
hcpl-2630-020e.lbr Publish 0.1.0 · Ray
hcpl-2630-020e.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

HCPL-2630-020E

Broadcom Limited · Logic Output Optocoupler · DIP-8

HCPL-2630-020E from Broadcom Limited, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ANODE1 input Channel 1 LED anode (+); drive with IF1, low input current capability of 5 mA.
2 CATHODE1 input Channel 1 LED cathode (-), returning the forward current IF1.
3 CATHODE2 input Channel 2 LED cathode (-), returning the forward current IF2.
4 ANODE2 input Channel 2 LED anode (+); drive with IF2, low input current capability of 5 mA.
5 GND power_in Ground for the detector ICs; a 0.1 µF bypass capacitor between pins 5 and 8 is recommended, placed as close as possible.
6 VO2 output Channel 2 open-collector Schottky-clamped output, TTL compatible.
7 VO1 output Channel 1 open-collector Schottky-clamped output, TTL compatible.
8 VCC power_in Supply voltage for the detector ICs; a 0.1 µF bypass capacitor between pins 5 and 8 is recommended, placed as close as possible.

Key specifications

Parameter Value
Manufacturer Broadcom Limited
Package DIP-8
Category Optocoupler
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High Level Output Current IOH 5.5 100 µA VCC = 5.5V, VE = 2.0V, VO = 5.5V, IF = 250 µA 16
Low Level Output Voltage (8-Pin DIP) VOL 0.35 0.6 V VCC = 5.5V, VE = 2.0V, IF = 5 mA, IOL (Sinking) = 13 mA 16
High Level Supply Current (Dual Channel) ICCH 10 15 mA Both Channels 16
Low Level Supply Current (Dual Channel) ICCL 13 21 mA Both Channels 16
Input Forward Voltage (8-Pin DIP) VF 1.4 1.5 1.75 V TA = 25°C, IF = 10 mA 16
Input Reverse Breakdown Voltage (8-Pin DIP) BVR 5 V IR = 10 µA 17
Propagation Delay Time to High Output Level tPLH 20 48 75 ns TA = 25°C, RL = 350 Ω, CL = 15 pF 18
Propagation Delay Time to Low Output Level tPHL 25 50 75 ns TA = 25°C, RL = 350 Ω, CL = 15 pF 18
Pulse Width Distortion (8-Pin DIP, SO-8) /tPHL, tPLH/ 3.5 35 ns RL = 350 Ω, CL = 15 pF 18
Propagation Delay Skew tPSK 40 ns RL = 350 Ω, CL = 15 pF 18
Logic High Common Mode Transient Immunity (HCPL-2630) /CMH/ 5000 10000 V/µs /VCM/ = 1 kV 19
Logic Low Common Mode Transient Immunity (HCPL-2630) /CML/ 5000 10000 V/µs /VCM/ = 1 kV 19
Input-Output Momentary Withstand Voltage (OPT 020) VISO 5000 Vrms 20
Storage Temperature TS -55 125 °C 14
Operating Temperature TA -40 85 °C 14
Average Forward Input Current IF 15 mA Dual 8-Pin DIP, each channel 14
Reverse Input Voltage VR 5 V 8-Pin DIP, SO-8, each channel 14
Input Power Dissipation PI 27 mW Dual 8-Pin DIP 14
Supply Voltage VCC 7 V 1 minute maximum 14
Output Collector Current IO 50 mA each channel 14
Output Collector Voltage VO 7 V each channel 14
Output Collector Power Dissipation PO 60 mW Dual 8-Pin DIP, each channel 14
Lead Solder Temperature (Through Hole) TLS 260 °C 10 s, 1.6 mm below seating plane 14
Input Current, Low Level IFL 0 250 µA 15
Input Current, High Level IFH 5 15 mA Each channel 15
Power Supply Voltage VCC 4.5 5.5 V 15
Operating Temperature TA -40 85 °C 15
Fan Out N 5 TTL Loads at RL = 1 kΩ 15
Output Pull-up Resistor RL 330 4 Ω (min) / kΩ (max), as printed 15

CAD (KiCad official)

  • Symbol: HCPL-2630-020E
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: hcpl-2630-020e-etched.step / hcpl-2630-020e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcpl-2630-020e.step / hcpl-2630-020e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom Limited datasheet (30 pp, sha256 ab7ab8c3280c92c4, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF