component

HCPL-2601-000E

Public Made by Adom

by adom

Broadcom AVAGO Logic Output Optoisolators, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentoptoisolatorshcpl-2601-000efactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 13d ago
viewers hcpl-2601-000e: viewers · Ray 13d ago
hcpl-2601-000e-etched.glb Publish 0.1.0 · Ray 13d ago
hcpl-2601-000e-etched.step hcpl-2601-000e: factory component page (tier=lcsc) · Ray 13d ago
hcpl-2601-000e-hero.glb hcpl-2601-000e: hero GLB from the etched model (keeps the MPN mark) · Ray 13d ago
hcpl-2601-000e-hero.overlay.json Publish 0.1.0 · Ray 13d ago
hcpl-2601-000e.glb Publish 0.1.0 · Ray 13d ago
hcpl-2601-000e.kicad_mod Publish 0.1.0 · Ray 13d ago
hcpl-2601-000e.kicad_sym Publish 0.1.0 · Ray 13d ago
hcpl-2601-000e.lbr Publish 0.1.0 · Ray 13d ago
hcpl-2601-000e.step Publish 0.1.0 · Ray 13d ago
package.json Publish 0.1.0 · Ray 13d ago
page.json Set visibility: public · Ray 13d ago
README.md Publish 0.1.0 · Ray 13d ago

HCPL-2601-000E

Broadcom AVAGO · Logic Output Optoisolators · DIP-8

HCPL-2601-000E from Broadcom AVAGO, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not connected; shown as NC in the functional diagram and schematic.
2 ANODE input LED anode input; the selection guide gives an input on-current of 5 mA for HCPL-2601.
3 CATHODE passive LED cathode, forming the GaAsP input light emitting diode with the anode on pin 2.
4 NC unconnected Not connected; shown as NC in the functional diagram and schematic.
5 GND power_in Detector ground; a 0.1 µF bypass capacitor must be connected as close as possible between pins 5 and 8.
6 VO output Output of the detector IC, an open-collector Schottky-clamped transistor with TTL compatibility.
7 VE input Enable input that allows the detector to be strobed (available on single channel products such as HCPL-2601).
8 VCC power_in Detector supply; a 0.1 µF bypass capacitor is recommended as close as possible between pins 5 and 8.

Key specifications

Parameter Value
Manufacturer Broadcom AVAGO
Package DIP-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Current, Low Level IFL 0 250 µA 15
Input Current, High Level IFH 5 15 mA 15
Power Supply Voltage VCC 4.5 5.5 V 15
Low Level Enable Voltage VEL 0 0.8 V 15
High Level Enable Voltage VEH 2 V 15
Operating Temperature TA -40 85 °C 15
Fan Out N 5 TTL Loads RL = 1 kΩ 15
Output Pull-up Resistor RL 330 4 Ω (min) / kΩ (max) as printed 15
Storage Temperature TS -55 125 °C 14
Operating Temperature TA -40 85 °C 14
Average Forward Input Current IF 20 mA Single 8-Pin DIP 14
Reverse Input Voltage VR 5 V 8-Pin DIP, SO-8 14
Input Power Dissipation PI 36 mW Single 8-Pin DIP 14
Supply Voltage (1 Minute Maximum) VCC 7 V 1 minute maximum 14
Enable Input Current IE 5 mA 14
Output Collector Current IO 50 mA 14
Output Collector Voltage VO 7 V 14
Output Collector Power Dissipation PO 85 mW Single 8-Pin DIP 14
Lead Solder Temperature TLS 260 °C for 10 s, 1.6 mm below seating plane (8-Pin DIP) 14
High Level Output Current IOH 5.5 100 µA VCC = 5.5V, VE = 2.0V, VO = 5.5V, IF = 250 μA 16
Low Level Output Voltage VOL 0.35 0.6 V VCC = 5.5V, VE = 2.0V, IF = 5 mA, IOL (Sinking) = 13 mA 16
High Level Supply Current, Single Channel ICCH 7 10 mA VE = 0.5V, VCC = 5.5V, IF = 0 mA 16
Low Level Supply Current, Single Channel ICCL 9 13 mA VE = 0.5V, VCC = 5.5V, IF = 10 mA 16
High Level Enable Current, Single Channel IEH -0.7 -1.6 mA VCC = 5.5V, VE = 2.0V 16
Low Level Enable Current IEL -0.9 -1.6 mA VCC = 5.5V, VE = 0.5V 16
High Level Enable Voltage VEH 2 V 16
Low Level Enable Voltage VEL 0.8 V 16
Input Forward Voltage (8-Pin DIP) VF 1.4 1.5 1.75 V TA = 25°C, IF = 10 mA 16
Input Reverse Breakdown Voltage (8-Pin DIP, SO-8) BVR 5 V IR = 10 µA 17
Propagation Delay Time to High Output Level tPLH 20 48 75 ns TA = 25°C, RL = 350Ω, CL = 15 pF 18
Propagation Delay Time to Low Output Level tPHL 25 50 75 ns TA = 25°C, RL = 350Ω, CL = 15 pF 18
Pulse Width Distortion /tPHL, tPLH/ 3.5 35 ns RL = 350Ω, CL = 15 pF 18
Propagation Delay Skew tPSK 40 ns RL = 350Ω, CL = 15 pF 18
Logic High Common Mode Transient Immunity (HCPL-2601/2631) /CMH/ 10000 15000 V/µs /VCM/ = 1 kV 19
Logic Low Common Mode Transient Immunity (HCPL-2601/2631) /CML/ 10000 15000 V/µs /VCM/ = 1 kV 19
Input-Output Insulation Leakage Current II-O 1 µA 45% RH, t = 5s, VI-O = 3 kVdc, TA = 25°C 20
Input-Output Momentary Withstand Voltage (8-Pin DIP, SO-8) VISO 3750 Vrms RH 50%, t = 1 min, TA = 25°C 20

CAD (KiCad official)

  • Symbol: HCPL-2601-000E
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: hcpl-2601-000e-etched.step / hcpl-2601-000e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcpl-2601-000e.step / hcpl-2601-000e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom AVAGO datasheet (30 pp, sha256 98c77824e0842e59, retrieved 2026-10-15, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF