main
Ray Publish 0.1.0 e0c7979

HCPL-0731-000E

Broadcom/AVAGO · Logic Output Optoisolators · SOIC-8

HCPL-0731-000E from Broadcom/AVAGO, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ANODE 1 passive Anode of input LED channel 1, rated for 0.5 to 12 mA forward input current (ON), 5 V maximum reverse voltage and 20 mA maximum average forward current.
2 CATHODE 1 passive Cathode of input LED channel 1, sharing the same limits as channel 1 (0.5 to 12 mA ON, 5 V reverse, 20 mA average) with 35 mW maximum input power dissipation per channel.
3 CATHODE 2 passive Cathode of input LED channel 2, with the same limits as channel 1 (0.5 to 12 mA ON, 5 V reverse, 20 mA average).
4 ANODE 2 passive Anode of input LED channel 2, with the same limits as channel 1 (0.5 to 12 mA ON, 5 V reverse, 20 mA average).
5 GND power_in Common ground and the most negative voltage on the detector side, with a 0.1 µF bypass capacitor recommended between pins 5 and 8.
6 VO2 output Open-collector output of channel 2 with output current limited to 60 mA per channel and output voltage limited to 18 V (HCPL-0731) relative to pin 5.
7 VO1 output Open-collector output of channel 1 with output current limited to 60 mA per channel and output voltage limited to 18 V (HCPL-0731) relative to pin 5.
8 VCC power_in Detector supply with a recommended range of 4.5 to 18 V for the HCPL-0731 (absolute maximum -0.5 to 18 V), bypassed with 0.1 µF to pin 5, and operable down to 1.6 V without adversely affecting parametrics.

Key specifications

Parameter Value
Manufacturer Broadcom/AVAGO
Package SOIC-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Current transfer ratio (HCPL-0731) CTR 400 1800 5000 % IF = 0.5 mA, VCC = 4.5 V, VO = 0.4 V 9
Current transfer ratio (HCPL-0731) CTR 500 1600 2600 % IF = 1.6 mA 9
Logic low output voltage (HCPL-0731) VOL 0.1 0.4 V IF = 1.6 mA, VCC = 4.5 V, IO = 8 mA 9
Logic low output voltage (HCPL-0731) VOL 0.2 0.4 V IF = 12 mA, IO = 24 mA 9
Logic high output current (HCPL-0731) IOH 0.05 100 µA VO = VCC = 18 V, IF = 0 mA 9
Logic low supply current (HCPL-0731) ICCL 1.2 3 mA VCC = 18 V, IF1 = IF2 = 1.6 mA, VO1 = VO2 = Open 9
Logic high supply current (HCPL-0731) ICCH 0.005 20 µA VCC = 18 V, IF1 = IF2 = 0 mA, VO1 = VO2 = Open 9
Input forward voltage VF 1.4 1.75 V IF = 1.6 mA, TA = 25°C 9
Input reverse breakdown voltage BVR 5 V IR = 10 µA, TA = 25°C 9
Propagation delay to logic low (HCPL-0731) tPHL 25 120 µs IF = 0.5 mA, RL = 4.7 kΩ, TA = 25°C 10
Propagation delay to logic high (HCPL-0731) tPLH 10 90 µs IF = 0.5 mA, RL = 4.7 kΩ, TA = 25°C 10
Common mode transient immunity at logic high output /CMH/ 1000 10000 V/µs IF = 0 mA, TA = 25°C, RL = 2.2 kΩ, /VCM/ = 10 Vp-p 10
Common mode transient immunity at logic low output /CML/ 1000 10000 V/µs IF = 1.6 mA, TA = 25°C, RL = 2.2 kΩ, /VCM/ = 10 Vp-p 10
Input-output momentary withstand voltage VISO 3750 V rms t = 1 min, RH ≤ 50% 11
Capacitance (input-output) CI-O 0.6 pF f = 1 MHz 11
Input-input insulation leakage current II-I 0.005 µA RH ≤ 45%, VI-I = 500 VDC 11
Capacitance (input-input) CI-I 0.25 pF 11
Input forward voltage temperature coefficient ΔVF/ΔTA -1.8 mV/°C IF = 1.6 mA 9
Input capacitance CIN 60 pF f = 1 MHz, VF = 0 9
Minimum external air gap (external clearance) L(101) 4.9 mm SO-8 package; measured from input terminals to output terminals, shortest distance through air 7
Minimum external tracking (external creepage) L(102) 4.8 mm SO-8 package; measured from input terminals to output terminals, shortest distance along body 7
Minimum internal plastic gap (internal clearance) 0.08 mm Through insulation distance, conductor to conductor 7
Forward input current (ON) IF(ON) 0.5 12 mA 8
Power supply voltage (HCPL-0731) VCC 4.5 18 V HCPL-2731/HCPL-0731 8
Forward input voltage (OFF) VF(OFF) 0 0.8 V 8
Operating temperature TA 0 70 °C 8
Storage temperature TS -55 125 °C 8
Operating temperature TA -40 85 °C No derating required up to 85°C 8
Average forward input current IF(AVG) 20 mA 8
Peak forward input current IFPK 40 mA 50% duty cycle, 1 ms pulse width 8
Reverse input voltage VR 5 V Each channel 8
Input power dissipation PI 35 mW Each channel 8
Output current IO 60 mA Each channel 8
Supply and output voltage (HCPL-0731) VCC -0.5 18 V HCPL-2731, HCPL-0731; VCC - Pin 8-5, VO - Pin 7,6-5; Note 1 8
Output power dissipation PO 100 mW Each channel; Note 12 8
Total power dissipation PT 135 mW Each channel 8
Output power derating above 65°C free-air temperature 2.3 mW/°C SO-8 package; derate linearly above 65°C free-air temperature 11
Safety limiting case temperature TS 175 °C Safety limiting value, IEC/EN/DIN EN 60747-5-2 7
Safety limiting input current IS,INPUT 400 mA Safety limiting value, IF, PS = 0 7
Safety limiting output power PS,OUTPUT 700 mW Safety limiting value 7

CAD (KiCad official)

  • Symbol: HCPL-0731-000E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: hcpl-0731-000e-etched.step / hcpl-0731-000e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcpl-0731-000e.step / hcpl-0731-000e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom/AVAGO datasheet (13 pp, sha256 177bd8cac8b17627, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF