component
HCPL-0700-500E
Public Made by Adomby adom
Broadcom/AVAGO Logic Output Optoisolators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHCPL-0700-500E
Broadcom/AVAGO · Logic Output Optoisolators · SOIC-8
HCPL-0700-500E from Broadcom/AVAGO, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection. |
| 2 | ANODE | passive | LED anode (input); forward input current IF(ON) is 0.5 to 12 mA. |
| 3 | CATHODE | passive | LED cathode (input); the LED is OFF when forward input voltage is 0 to 0.8 V. |
| 4 | NC | unconnected | No connection. |
| 5 | GND | power_in | Output-side ground; a 0.1 µF bypass capacitor between pins 8 and 5 is recommended. |
| 6 | VO | output | Open-collector output, low when the LED is ON; maximum output current 60 mA. |
| 7 | VB | power_in | Photodetector base access terminal for gain bandwidth adjustment; leave open for the specified characteristics. |
| 8 | VCC | power_in | Supply voltage, 4.5 to 18 V recommended; absolute maximum 7 V for HCPL-0700. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom/AVAGO |
| Package | SOIC-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Current Transfer Ratio | CTR | 300 | 1600 | 2600 | % | IF = 1.6 mA, VCC = 4.5V, VO = 0.4V | 12 |
| Logic Low Output Voltage | VOL | 0.1 | 0.4 | V | IF = 1.6 mA, IO = 4.8 mA, VCC = 4.5V | 12 | |
| Logic High Output Current | IOH | 0.1 | 250 | μA | VO = VCC = 7V, IF = 0 mA | 12 | |
| Logic Low Supply Current | ICCL | 0.4 | 1.5 | mA | IF = 1.6 mA, VO = Open, VCC = 18V | 12 | |
| Logic High Supply Current | ICCH | 0.01 | 10 | μA | IF = 0 mA, VO = Open, VCC = 18V | 12 | |
| Input Forward Voltage | VF | 1.25 | 1.4 | 1.75 | V | TA = 25°C, IF = 1.6 mA | 13 |
| Input Reverse Breakdown Voltage | BVR | 5 | V | IR = 10 µA, TA = 25°C | 13 | ||
| Propagation Delay Time to Logic Low | tPHL | 1.6 | 10 | μs | IF = 1.6 mA, RL = 2.2 kΩ, TA = 25°C | 14 | |
| Propagation Delay Time to Logic Low (0-70°C) | tPHL | 15 | μs | IF = 1.6 mA, RL = 2.2 kΩ, TA = 0°C to 70°C | 14 | ||
| Propagation Delay Time to Logic High | tPLH | 10 | 35 | μs | IF = 1.6 mA, RL = 2.2 kΩ, TA = 25°C | 14 | |
| Propagation Delay Time to Logic High (0-70°C) | tPLH | 50 | μs | IF = 1.6 mA, RL = 2.2 kΩ, TA = 0°C to 70°C | 14 | ||
| Common Mode Transient Immunity at Logic High Output | /CMH/ | 1000 | 10000 | V/µs | IF = 0 mA, TA = 25°C, RI = 2.2 kΩ, /VCM/ = 10Vp-p | 14 | |
| Common Mode Transient Immunity at Logic Low Output | /CML/ | 1000 | 10000 | V/µs | IF = 1.6 mA, TA = 25°C, RI = 2.2 kΩ, /VCM/ = 10Vp-p | 14 | |
| Input-Output Momentary Withstand Voltage | VISO | 3750 | V rms | RH < 50%, t = 1 minute, TA = 25°C | 15 | ||
| Storage Temperature | TS | -55 | 125 | °C | 11 | ||
| Operating Temperature (absolute maximum) | TA | -40 | 85 | °C | 11 | ||
| Average Forward Input Current | IF(AVG) | 20 | mA | 11 | |||
| Peak Forward Input Current | IFPK | 40 | mA | 50% duty cycle, 1 ms pulse width | 11 | ||
| Peak Transient Input Current | IF(TRAN) | 1 | A | <1 μs pulse width, 300 pps | 11 | ||
| Reverse Input Voltage | VR | 5 | V | 11 | |||
| Input Power Dissipation | PI | 35 | mW | 11 | |||
| Output Current | IO | 60 | mA | pin 6 | 11 | ||
| Emitter Base Reverse Voltage | VEB | 0.5 | V | pins 5 through 7 | 11 | ||
| Supply Voltage and Output Voltage | VCC | -0.5 | 7 | V | 6N138, HCPL-0700, HCNW138 | 11 | |
| Output Power Dissipation | PO | 100 | mW | 11 | |||
| Total Power Dissipation | PT | 135 | mW | 11 | |||
| Power Supply Voltage | VCC | 4.5 | 18 | V | 11 | ||
| Forward Input Current (ON) | IF(ON) | 0.5 | 12 | mA | 11 | ||
| Forward Input Voltage (OFF) | VF(OFF) | 0 | 0.8 | V | 11 | ||
| Operating Temperature | TA | 0 | 70 | °C | 11 | ||
| Temperature Coefficient of Forward Voltage | ΔVF/ΔTA | -1.8 | mV/°C | IF = 1.6 mA | 13 | ||
| Input Capacitance | CIN | 60 | pF | f = 1 MHz, VF = 0V | 13 | ||
| Resistance (Input-Output) | RI-O | 1012 | Ω | VI-O = 500 Vdc, RH < 45% | 15 | ||
| Capacitance (Input-Output) | CI-O | 0.6 | pF | f = 1 MHz | 15 |
CAD (KiCad official)
- Symbol:
HCPL-0700-500E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
hcpl-0700-500e-etched.step/hcpl-0700-500e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-0700-500e.step/hcpl-0700-500e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom/AVAGO datasheet (19 pp, sha256
26b942f415137775, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).