component
HCPL-0611-500E
Public Made by Adomby adom
Broadcom AVAGO Logic Output Optoisolators, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHCPL-0611-500E
Broadcom AVAGO · Logic Output Optoisolators · SOP-8
HCPL-0611-500E from Broadcom AVAGO, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Pin 1 is not connected internally; the functional diagram marks it NC. |
| 2 | ANODE | input | LED anode input; the datasheet specifies a low input current capability of 5 mA for the LED drive. |
| 3 | CATHODE | input | LED cathode input for the GaAsP light-emitting diode driven across pins 2 and 3. |
| 4 | NC | unconnected | Pin 4 is not connected internally; the functional diagram marks it NC. |
| 5 | GND | power_in | Ground reference for the integrated detector; a 0.1 µF bypass capacitor must be connected as close as possible between pins 5 and 8. |
| 6 | VO | output | Detector output is an open-collector Schottky-clamped transistor providing TTL/LSTTL-compatible logic output. |
| 7 | VE | input | Enable input that strobes the detector output; output behavior for H and L enable levels is defined by the truth table. |
| 8 | VCC | power_in | Positive supply for the detector IC; a 0.1 µF bypass capacitor must be connected as close as possible between this pin and pin 5. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom AVAGO |
| Package | SOP-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High Level Output Current | IOH | 5.5 | 100 | µA | VCC = 5.5V, VE = 2.0V; VO = 5.5V, IF = 250 mA | 16 | |
| Low Level Output Voltage (8-Pin DIP, SO-8) | VOL | 0.35 | 0.6 | V | VCC = 5.5V, VE = 2.0V, IF = 5 mA, IOL (Sinking) = 13 mA | 16 | |
| High Level Supply Current (Single Channel) | ICCH | 7 | 10 | mA | VE = 0.5V VCC = 5.5V, IF = 0 mA | 16 | |
| Low Level Supply Current (Single Channel) | ICCL | 9 | 13 | mA | VE = 0.5V, VCC = 5.5V, IF = 10 mA | 16 | |
| High Level Enable Current (Single Channel) | IEH | -0.7 | -1.6 | mA | VCC = 5.5V, VE = 2.0V | 16 | |
| Low Level Enable Current | IEL | -0.9 | -1.6 | mA | VCC = 5.5V, VE = 0.5V | 16 | |
| High Level Enable Voltage | VEH | 2 | V | 16 | |||
| Low Level Enable Voltage | VEL | 0.8 | V | 16 | |||
| Input Forward Voltage (SO-8) | VF | 1.3 | 1.8 | V | IF = 10 mA | 16 | |
| Input Reverse Breakdown Voltage (8-Pin DIP, SO-8) | BVR | 5 | V | IR = 10 µA | 17 | ||
| Pulse Width Distortion (SO-8) | /tPHL, tPLH/ | 3.5 | 35 | ns | RL = 350, CL = 15 pF | 18 | |
| Propagation Delay Skew | tPSK | 40 | ns | RL = 350, CL = 15 pF | 18 | ||
| Propagation Delay Time to High Output Level | tPLH | 20 | 48 | 75 | ns | TA = 25°C, RL = 350, CL = 15 pF | 18 |
| Propagation Delay Time to Low Output Level | tPHL | 25 | 50 | 75 | ns | TA = 25°C, RL = 350, CL = 15 pF | 18 |
| Logic High Common Mode Transient Immunity (HCPL-0611) | /CMH/ | 15000 | 25000 | V/µs | /VCM/ = 1 kV | 19 | |
| Logic Low Common Mode Transient Immunity (HCPL-0611) | /CML/ | 15000 | 25000 | V/µs | /VCM/ = 1 kV | 19 | |
| Input-Output Momentary Withstand Voltage (8-Pin DIP, SO-8) | VISO | 3750 | Vrms | RH 50%, t = 1 min, TA = 25°C | 20 | ||
| Input-Output Insulation Leakage Current (Single SO-8) | II-O | 1 | µA | 45% RH, t = 5s, VI-O = 3 kVdc, TA = 25°C | 20 | ||
| Input Current, Low Level | IFL | 0 | 250 | µA | 15 | ||
| Input Current, High Level | IFH | 5 | 15 | mA | 15 | ||
| Power Supply Voltage | VCC | 4.5 | 5.5 | V | 15 | ||
| Low Level Enable Voltage (recommended) | VEL | 0 | 0.8 | V | 15 | ||
| High Level Enable Voltage (recommended) | VEH | 2 | V | 15 | |||
| Operating Temperature (recommended) | TA | -40 | 85 | °C | 15 | ||
| Fan Out | N | 5 | TTL Loads | at RL = 1 k | 15 | ||
| Output Pull-up Resistor | RL | 330 | 4 | Ω (min 330); kΩ (max 4) | 15 | ||
| Storage Temperature | TS | -55 | 125 | °C | 14 | ||
| Operating Temperature (absolute maximum) | TA | -40 | 85 | °C | 14 | ||
| Average Forward Input Current (single channel) | IF | 20 | mA | Single 8-Pin DIP, Single SO-8, Widebody | 14 | ||
| Reverse Input Voltage | VR | 5 | V | 8-Pin DIP, SO-8 | 14 | ||
| Supply Voltage (1 minute maximum) | VCC | 7 | V | 1 minute maximum | 14 | ||
| Enable Input Current | IE | 5 | mA | 14 | |||
| Output Collector Current | IO | 50 | mA | 14 | |||
| Output Collector Voltage | VO | 7 | V | 14 | |||
| Output Collector Power Dissipation (single channel) | PO | 85 | mW | Single 8-Pin DIP, Single SO-8, Widebody | 14 |
CAD (KiCad official)
- Symbol:
HCPL-0611-500E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hcpl-0611-500e-etched.step/hcpl-0611-500e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-0611-500e.step/hcpl-0611-500e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom AVAGO datasheet (30 pp, sha256
1accc7e35af1f038, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).