main
Ray
Publish 0.1.0
b4044b4
HCPL-0611-000E
Broadcom/AVAGO · Logic Output Optoisolators · SOIC-8
HCPL-0611-000E from Broadcom/AVAGO, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection (marked NC in the functional diagram for the single-channel SO-8 family). |
| 2 | ANODE | passive | LED anode input; the schematic shows the LED forward current IF flowing from pin 2 to pin 3. |
| 3 | CATHODE | passive | LED cathode connection, paired with anode pin 2 to drive the internal GaAsP LED. |
| 4 | NC | unconnected | No internal connection (marked NC in the functional diagram for the single-channel SO-8 family). |
| 5 | GND | power_in | Ground reference for the detector IC; a 0.1-µF bypass capacitor must be connected as close as possible between pins 5 and 8. |
| 6 | VO | output | Output of the detector IC, an open-collector Schottky-clamped transistor with TTL/LSTTL compatibility. |
| 7 | VE | input | Enable input that strobes the detector: when low the output is held high, and when high the output follows the LED state (low with LED on, high with LED off). |
| 8 | VCC | power_in | Detector supply pin; a 0.1-µF bypass capacitor must be connected as close as possible between pins 5 and 8. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom/AVAGO |
| Package | SOIC-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Current, Low Level | IFL | 0 | 250 | µA | 15 | ||
| Input Current, High Level | IFH | 5 | 15 | mA | 15 | ||
| Power Supply Voltage | VCC | 4.5 | 5.5 | V | 15 | ||
| Low Level Enable Voltage (single channel products only) | VEL | 0 | 0.8 | V | 15 | ||
| High Level Enable Voltage (single channel products only) | VEH | 2 | V | max printed as VCC | 15 | ||
| Operating Temperature | TA | -40 | 85 | °C | 15 | ||
| Fan Out (at RL = 1 k) | N | 5 | TTL Loads | at RL = 1 k | 15 | ||
| Output Pull-up Resistor (minimum) | RL | 330 | Ω | 15 | |||
| Output Pull-up Resistor (maximum) | RL | 4 | kΩ | 15 | |||
| High Level Output Current | IOH | 5.5 | 100 | µA | VCC = 5.5V, VE = 2.0V; VO = 5.5V, IF = 250 mA | 16 | |
| Low Level Output Voltage (8-Pin DIP, SO-8) | VOL | 0.35 | 0.6 | V | VCC = 5.5V, VE = 2.0V, IF = 5 mA, IOL (Sinking) = 13 mA | 16 | |
| High Level Supply Current (Single Channel) | ICCH | 7 | 10 | mA | VE = 0.5V VCC = 5.5V, IF = 0 mA | 16 | |
| Low Level Supply Current (Single Channel) | ICCL | 9 | 13 | mA | VE = 0.5V, VCC = 5.5V, IF = 10 mA | 16 | |
| High Level Enable Current (Single Channel) | IEH | -0.7 | -1.6 | mA | VCC = 5.5V, VE = 2.0V | 16 | |
| Low Level Enable Current | IEL | -0.9 | -1.6 | mA | VCC = 5.5V, VE = 0.5V | 16 | |
| High Level Enable Voltage | VEH | 2 | V | 16 | |||
| Low Level Enable Voltage | VEL | 0.8 | V | 16 | |||
| Input Forward Voltage (SO-8) | VF | 1.3 | 1.8 | V | IF = 10 mA | 16 | |
| Input Reverse Breakdown Voltage (8-Pin DIP, SO-8) | BVR | 5 | V | IR = 10 µA | 17 | ||
| Propagation Delay Time to High Output Level | tPLH | 20 | 48 | 75 | ns | TA = 25°C, RL = 350, CL = 15 pF | 18 |
| Propagation Delay Time to Low Output Level | tPHL | 25 | 50 | 75 | ns | TA = 25°C, RL = 350, CL = 15 pF | 18 |
| Pulse Width Distortion (8-Pin DIP, SO-8) | /tPHL, tPLH/ | 3.5 | 35 | ns | RL = 350, CL = 15 pF | 18 | |
| Propagation Delay Skew | tPSK | 40 | ns | RL = 350, CL = 15 pF | 18 | ||
| Logic High Common Mode Transient Immunity (HCPL-0611) | /CMH/ | 15000 | 25000 | V/µs | /VCM/ = 1 kV | 19 | |
| Logic Low Common Mode Transient Immunity (HCPL-0611) | /CML/ | 15000 | 25000 | V/µs | /VCM/ = 1 kV | 19 | |
| Input-Output Insulation Leakage Current (Single SO-8) | II-O | 1 | µA | 45% RH, t = 5s, VI-O = 3 kVdc, TA = 25°C | 20 | ||
| Input-Output Momentary Withstand Voltage (8-Pin DIP, SO-8) | VISO | 3750 | Vrms | RH 50%, t = 1 min, TA = 25°C | 20 | ||
| Storage Temperature | TS | -55 | 125 | °C | 14 | ||
| Operating Temperature | TA | -40 | 85 | °C | 14 | ||
| Average Forward Input Current (Single SO-8) | IF | 20 | mA | Peaking transient up to 50 mA, 50 ns max pulse width, provided average current does not exceed 20 mA | 14 | ||
| Reverse Input Voltage (8-Pin DIP, SO-8) | VR | 5 | V | 14 | |||
| Supply Voltage (1 Minute Maximum) | VCC | 7 | V | 1 minute maximum | 14 | ||
| Enable Input Current | IE | 5 | mA | 14 | |||
| Output Collector Current | IO | 50 | mA | 14 | |||
| Output Collector Voltage | VO | 7 | V | 14 | |||
| Output Collector Power Dissipation (Single SO-8) | PO | 85 | mW | 14 |
CAD (KiCad official)
- Symbol:
HCPL-0611-000E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
hcpl-0611-000e-etched.step/hcpl-0611-000e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-0611-000e.step/hcpl-0611-000e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom/AVAGO datasheet (31 pp, sha256
96d2bfe698febfbf, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HCPL-0611-000E
**Broadcom/AVAGO** · Logic Output Optoisolators · SOIC-8
HCPL-0611-000E from Broadcom/AVAGO, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection (marked NC in the functional diagram for the single-channel SO-8 family). |
| 2 | ANODE | passive | LED anode input; the schematic shows the LED forward current IF flowing from pin 2 to pin 3. |
| 3 | CATHODE | passive | LED cathode connection, paired with anode pin 2 to drive the internal GaAsP LED. |
| 4 | NC | unconnected | No internal connection (marked NC in the functional diagram for the single-channel SO-8 family). |
| 5 | GND | power_in | Ground reference for the detector IC; a 0.1-µF bypass capacitor must be connected as close as possible between pins 5 and 8. |
| 6 | VO | output | Output of the detector IC, an open-collector Schottky-clamped transistor with TTL/LSTTL compatibility. |
| 7 | VE | input | Enable input that strobes the detector: when low the output is held high, and when high the output follows the LED state (low with LED on, high with LED off). |
| 8 | VCC | power_in | Detector supply pin; a 0.1-µF bypass capacitor must be connected as close as possible between pins 5 and 8. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom/AVAGO |
| Package | SOIC-8 |
| Category | Optoisolators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Current, Low Level | IFL | 0 | | 250 | µA | | 15 |
| Input Current, High Level | IFH | 5 | | 15 | mA | | 15 |
| Power Supply Voltage | VCC | 4.5 | | 5.5 | V | | 15 |
| Low Level Enable Voltage (single channel products only) | VEL | 0 | | 0.8 | V | | 15 |
| High Level Enable Voltage (single channel products only) | VEH | 2 | | | V | max printed as VCC | 15 |
| Operating Temperature | TA | -40 | | 85 | °C | | 15 |
| Fan Out (at RL = 1 k) | N | | | 5 | TTL Loads | at RL = 1 k | 15 |
| Output Pull-up Resistor (minimum) | RL | 330 | | | Ω | | 15 |
| Output Pull-up Resistor (maximum) | RL | | | 4 | kΩ | | 15 |
| High Level Output Current | IOH | | 5.5 | 100 | µA | VCC = 5.5V, VE = 2.0V; VO = 5.5V, IF = 250 mA | 16 |
| Low Level Output Voltage (8-Pin DIP, SO-8) | VOL | | 0.35 | 0.6 | V | VCC = 5.5V, VE = 2.0V, IF = 5 mA, IOL (Sinking) = 13 mA | 16 |
| High Level Supply Current (Single Channel) | ICCH | | 7 | 10 | mA | VE = 0.5V VCC = 5.5V, IF = 0 mA | 16 |
| Low Level Supply Current (Single Channel) | ICCL | | 9 | 13 | mA | VE = 0.5V, VCC = 5.5V, IF = 10 mA | 16 |
| High Level Enable Current (Single Channel) | IEH | | -0.7 | -1.6 | mA | VCC = 5.5V, VE = 2.0V | 16 |
| Low Level Enable Current | IEL | | -0.9 | -1.6 | mA | VCC = 5.5V, VE = 0.5V | 16 |
| High Level Enable Voltage | VEH | 2 | | | V | | 16 |
| Low Level Enable Voltage | VEL | | | 0.8 | V | | 16 |
| Input Forward Voltage (SO-8) | VF | 1.3 | | 1.8 | V | IF = 10 mA | 16 |
| Input Reverse Breakdown Voltage (8-Pin DIP, SO-8) | BVR | 5 | | | V | IR = 10 µA | 17 |
| Propagation Delay Time to High Output Level | tPLH | 20 | 48 | 75 | ns | TA = 25°C, RL = 350, CL = 15 pF | 18 |
| Propagation Delay Time to Low Output Level | tPHL | 25 | 50 | 75 | ns | TA = 25°C, RL = 350, CL = 15 pF | 18 |
| Pulse Width Distortion (8-Pin DIP, SO-8) | /tPHL, tPLH/ | | 3.5 | 35 | ns | RL = 350, CL = 15 pF | 18 |
| Propagation Delay Skew | tPSK | | | 40 | ns | RL = 350, CL = 15 pF | 18 |
| Logic High Common Mode Transient Immunity (HCPL-0611) | /CMH/ | 15000 | 25000 | | V/µs | /VCM/ = 1 kV | 19 |
| Logic Low Common Mode Transient Immunity (HCPL-0611) | /CML/ | 15000 | 25000 | | V/µs | /VCM/ = 1 kV | 19 |
| Input-Output Insulation Leakage Current (Single SO-8) | II-O | | | 1 | µA | 45% RH, t = 5s, VI-O = 3 kVdc, TA = 25°C | 20 |
| Input-Output Momentary Withstand Voltage (8-Pin DIP, SO-8) | VISO | 3750 | | | Vrms | RH 50%, t = 1 min, TA = 25°C | 20 |
| Storage Temperature | TS | -55 | | 125 | °C | | 14 |
| Operating Temperature | TA | -40 | | 85 | °C | | 14 |
| Average Forward Input Current (Single SO-8) | IF | | | 20 | mA | Peaking transient up to 50 mA, 50 ns max pulse width, provided average current does not exceed 20 mA | 14 |
| Reverse Input Voltage (8-Pin DIP, SO-8) | VR | | | 5 | V | | 14 |
| Supply Voltage (1 Minute Maximum) | VCC | | | 7 | V | 1 minute maximum | 14 |
| Enable Input Current | IE | | | 5 | mA | | 14 |
| Output Collector Current | IO | | | 50 | mA | | 14 |
| Output Collector Voltage | VO | | | 7 | V | | 14 |
| Output Collector Power Dissipation (Single SO-8) | PO | | | 85 | mW | | 14 |
## CAD (KiCad official)
- Symbol: `HCPL-0611-000E`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `hcpl-0611-000e-etched.step` / `hcpl-0611-000e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hcpl-0611-000e.step` / `hcpl-0611-000e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Broadcom/AVAGO datasheet](docs/hcpl-0611-000e-datasheet.pdf) (31 pp, sha256 `96d2bfe698febfbf`, retrieved 2026-10-31, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hcpl-0611-000e-datasheet.pdf)