component
HCPL-060L-500E
Public Made by Adomby adom
Broadcom AVAGO Logic Output Optoisolators, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
HCPL-060L-500E
Broadcom AVAGO · Logic Output Optoisolators · SO-8
HCPL-060L-500E from Broadcom AVAGO, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected; the datasheet labels this pin NC on the HCPL-260L/060L pin diagram and the test-circuit figures. |
| 2 | ANODE | input | LED anode input; the datasheet recommends a high-level input current IFH of 5 to 15 mA (6.3 to 10 mA for best performance) and a low-level input current IFL of 0 to 250 µA. |
| 3 | CATHODE | input | LED cathode; the input reverse breakdown voltage is 5 V minimum at IR = 10 mA, and the average forward input current must not exceed 20 mA for single-channel parts. |
| 4 | NC | unconnected | Not connected; the datasheet labels this pin NC on the HCPL-260L/060L pin diagram and the test-circuit figures. |
| 5 | GND | power_in | Output-side ground reference; a 0.1 µF bypass capacitor between pins 5 and 8 is recommended, with total lead length not exceeding 20 mm. |
| 6 | VO | output | Open-collector Schottky-clamped output; maximum output collector voltage is 7 V and maximum output collector current is 50 mA, with an external pull-up resistor RL of 330 Ω to 4 kΩ. |
| 7 | VE | input | Enable input for strobing the detector; low-level enable voltage is 0 to 0.8 V, high-level is 2.0 V to VCC, and it must not exceed VCC by more than 500 mV. |
| 8 | VCC | power_in | Detector supply voltage, recommended 2.7 V to 3.6 V or 4.5 V to 5.5 V, with a 7 V maximum for 1 minute. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom AVAGO |
| Package | SO-8 |
| Category | Optoisolators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
HCPL-060L-500E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
hcpl-060l-500e-etched.step/hcpl-060l-500e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-060l-500e.step/hcpl-060l-500e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom AVAGO datasheet (19 pp, sha256
d2ce2bdacde07890, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HCPL-060L-500E
**Broadcom AVAGO** · Logic Output Optoisolators · SO-8
HCPL-060L-500E from Broadcom AVAGO, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected; the datasheet labels this pin NC on the HCPL-260L/060L pin diagram and the test-circuit figures. |
| 2 | ANODE | input | LED anode input; the datasheet recommends a high-level input current IFH of 5 to 15 mA (6.3 to 10 mA for best performance) and a low-level input current IFL of 0 to 250 µA. |
| 3 | CATHODE | input | LED cathode; the input reverse breakdown voltage is 5 V minimum at IR = 10 mA, and the average forward input current must not exceed 20 mA for single-channel parts. |
| 4 | NC | unconnected | Not connected; the datasheet labels this pin NC on the HCPL-260L/060L pin diagram and the test-circuit figures. |
| 5 | GND | power_in | Output-side ground reference; a 0.1 µF bypass capacitor between pins 5 and 8 is recommended, with total lead length not exceeding 20 mm. |
| 6 | VO | output | Open-collector Schottky-clamped output; maximum output collector voltage is 7 V and maximum output collector current is 50 mA, with an external pull-up resistor RL of 330 Ω to 4 kΩ. |
| 7 | VE | input | Enable input for strobing the detector; low-level enable voltage is 0 to 0.8 V, high-level is 2.0 V to VCC, and it must not exceed VCC by more than 500 mV. |
| 8 | VCC | power_in | Detector supply voltage, recommended 2.7 V to 3.6 V or 4.5 V to 5.5 V, with a 7 V maximum for 1 minute. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom AVAGO |
| Package | SO-8 |
| Category | Optoisolators |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `HCPL-060L-500E`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `hcpl-060l-500e-etched.step` / `hcpl-060l-500e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hcpl-060l-500e.step` / `hcpl-060l-500e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Broadcom AVAGO datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586199454731423744) (19 pp, sha256 `d2ce2bdacde07890`, retrieved 2026-10-09, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hcpl-060l-500e-datasheet.pdf)