component
HCPL-0531-500E
Public Made by Adomby adom
Broadcom AVAGO Logic Output Optoisolators, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHCPL-0531-500E
Broadcom AVAGO · Logic Output Optoisolators · SO-8
HCPL-0531-500E from Broadcom AVAGO, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE 1 | input | Anode of the channel 1 input LED; the datasheet limits average forward current to 25 mA per channel, peak forward current to 50 mA (50% duty cycle, 1 ms pulse), and reverse LED input voltage to 5 V. |
| 2 | CATHODE 1 | passive | Cathode of the channel 1 input LED; the input LED reverse voltage is rated at 5 V maximum per channel. |
| 3 | CATHODE 2 | passive | Cathode of the channel 2 input LED; the input LED reverse voltage is rated at 5 V maximum per channel. |
| 4 | ANODE 2 | input | Anode of the channel 2 input LED; the datasheet limits average forward current to 25 mA per channel, peak forward current to 50 mA (50% duty cycle, 1 ms pulse), and reverse LED input voltage to 5 V. |
| 5 | GND | power_in | Common ground and reference for both output transistors and the supply; a 0.1 µF bypass capacitor between pins 5 and 8 is recommended. |
| 6 | VO2 | output | Open-collector output of channel 2; output voltage is rated -0.5 V to 20 V (pin 6 to 5), average output current 8 mA and peak output current 16 mA per channel. |
| 7 | VO1 | output | Open-collector output of channel 1; output voltage is rated -0.5 V to 20 V (pin 7 to 5), average output current 8 mA and peak output current 16 mA per channel. |
| 8 | VCC | power_in | Supply pin for the photodiode bias and output stages; supply voltage is rated -0.5 V to 30 V (pin 8 to 5), with a 0.1 µF bypass to pin 5 recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom AVAGO |
| Package | SO-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TS | -55 | 125 | °C | 9 | ||
| Operating Temperature | TA | -55 | 100 | °C | 9 | ||
| Average Forward Input Current | IF(AVG) | 25 | mA | each channel | 9 | ||
| Peak Forward Input Current | IF(PEAK) | 50 | mA | 50% duty cycle, 1 ms pulse width; each channel | 9 | ||
| Peak Transient Input Current | IF(TRANS) | 1 | A | ≤ 1 μs pulse width, 300 pps; each channel | 9 | ||
| Reverse LED Input Voltage | VR | 5 | V | each channel | 9 | ||
| Input Power Dissipation | PIN | 45 | mW | each channel | 9 | ||
| Average Output Current | IO(AVG) | 8 | mA | each channel | 9 | ||
| Peak Output Current | IO(PEAK) | 16 | mA | 9 | |||
| Supply Voltage | VCC | -0.5 | 30 | V | Pin 8-5 | 9 | |
| Output Voltage | VO | -0.5 | 20 | V | Pins 7-5, 6-5 | 9 | |
| Output Power Dissipation | PO | 35 | mW | each channel | 9 | ||
| Current Transfer Ratio | CTR | 19 | 24 | 50 | % | TA = 25°C, IF = 16 mA, VCC = 4.5 V, VO = 0.5 V | 10 |
| Logic Low Output Voltage | VOL | 0.1 | 0.5 | V | TA = 25°C, IO = 3.0 mA, IF = 16 mA, VCC = 4.5 V | 10 | |
| Logic High Output Current | IOH | 0.003 | 0.5 | μA | TA = 25°C, VCC = VO = 5.5 V, IF = 0 mA | 10 | |
| Logic High Output Current | IOH | 50 | μA | TA = 25°C, VCC = VO = 15 V, IF = 0 mA | 10 | ||
| Logic Low Supply Current | ICCL | 100 | 400 | μA | IF = 16 mA, VO = Open, VCC = 15 V | 10 | |
| Logic High Supply Current | ICCH | 0.05 | 4 | μA | IF = 0 mA, VO = Open, VCC = 15 V | 10 | |
| Input Forward Voltage | VF | 1.5 | 1.7 | V | TA = 25°C, IF = 16 mA | 10 | |
| Input Forward Voltage | VF | 1.8 | V | IF = 16 mA | 10 | ||
| Input Reverse Breakdown Voltage | BVR | 5 | V | IR = 10 μA | 10 | ||
| Propagation Delay Time to Logic Low at Output | tPHL | 0.2 | 0.8 | 1 | μs | TA = 25°C, RL = 1.9 kΩ | 11 |
| Propagation Delay Time to Logic High at Output | tPLH | 0.6 | 0.8 | 1 | μs | TA = 25°C, RL = 1.9 kΩ | 11 |
| Common Mode Transient Immunity at Logic High Level Output | /CMH/ | 1 | 10 | kV/μs | IF = 0 mA, RL = 1.9 kΩ, TA = 25°C, VCM = 10 Vp-p | 11 | |
| Common Mode Transient Immunity at Logic Low Level Output | /CML/ | 1 | 10 | kV/μs | IF = 0 mA, RL = 1.9 kΩ, TA = 25°C, VCM = 10 Vp-p | 11 | |
| Input-Output Momentary Withstand Voltage | VISO | 3750 | V rms | RH < 50%, t = 1 min. | 11 |
CAD (KiCad official)
- Symbol:
HCPL-0531-500E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
hcpl-0531-500e-etched.step/hcpl-0531-500e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-0531-500e.step/hcpl-0531-500e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom AVAGO datasheet (14 pp, sha256
975c4371db266832, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).