component
HCPL-0466-500E
Public Made by Adomby adom
Broadcom AVAGO Logic Output Optoisolators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192
{
"slug": "hcpl-0466-500e",
"version": "0.1.0",
"type": "component",
"description": "Broadcom AVAGO Logic Output Optoisolators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"optoisolators",
"hcpl-0466-500e",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"hcpl-0466-500e.kicad_sym",
"hcpl-0466-500e.kicad_mod",
"hcpl-0466-500e.glb",
"hcpl-0466-500e.step",
"hcpl-0466-500e.lbr",
"docs/hero.png",
"docs/hcpl-0466-500e-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"hcpl-0466-500e-hero.glb",
"hcpl-0466-500e-hero.overlay.json",
"hcpl-0466-500e-etched.glb"
],
"component": {
"mpn": "HCPL-0466-500E",
"manufacturer": "Broadcom AVAGO",
"package": "SOIC-8",
"pin_count": 8,
"category": "Optoisolators",
"subcategory": "Logic Output Optoisolators",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906579659788288",
"parts": {
"symbol": "hcpl-0466-500e.kicad_sym",
"footprint": "hcpl-0466-500e.kicad_mod",
"model_3d": "hcpl-0466-500e-hero.glb",
"model_3d_plain": "hcpl-0466-500e-etched.glb",
"model_3d_step": "hcpl-0466-500e-etched.step",
"model_3d_step_plain": "hcpl-0466-500e.step",
"lbr": "hcpl-0466-500e.lbr"
},
"distributor_links": {
"lcsc": "C692010"
},
"distributor_check": {
"checked_at": "2026-10-17T15:21:05Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "quota"
},
"mouser": {
"pn": null,
"status": "quota"
}
},
"pins": [
{
"number": "1",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; the datasheet advises tying pin 1 to input circuit common if CMR is limited by LED current perturbation, or leaving it unconnected if CMR is limited by direct coupling to the output while the LED is off."
},
{
"number": "2",
"name": "ANODE",
"type": "input",
"description": "LED anode input; with pin 3 it sets the LED forward current, recommended IF(on) 10 mA to 20 mA and VF(off) -5 V to 0.8 V."
},
{
"number": "3",
"name": "CATHODE",
"type": "input",
"description": "LED cathode input; reverse input voltage (pin 3-2) is rated 5 V maximum for HCPL-0466, and average input current is limited to 25 mA."
},
{
"number": "4",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; same connection guidance as pin 1 (tie to input circuit common or leave unconnected depending on the CMR limiting mechanism)."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Detector ground reference for the output and supply; the datasheet specifies a 0.1 µF bypass capacitor between pins 5 and 8, and output and supply voltages are rated relative to this pin."
},
{
"number": "6",
"name": "VO",
"type": "output",
"description": "Open-collector-style output referenced to pin 5, rated -0.5 V to 30 V with average output current limited to 15 mA; shorting pins 6 and 7 enables the on-chip 20 kΩ pull-up."
},
{
"number": "7",
"name": "VL",
"type": "passive",
"description": "Connection to the internal 20 kΩ pull-up resistor (14 kΩ to 25 kΩ) to VCC, rated -0.5 V to VCC; short to pin 6 to use the internal pull-up, otherwise an external pull-up may be used."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Detector supply voltage, recommended 4.5 V to 30 V, absolute maximum 30 V relative to pin 5; a 0.1 µF bypass capacitor to pin 5 is recommended."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin names and functions were taken from the Functional Diagram (page 1) and the pin references in th; The ordering table (page 3) lists HCPL-0466-500E as the SO-8 surface-mount Gull Wing option in 1500-; Pins 1 and 4 are marked NC in the functional diagram; their connection depends on the CMR design cho"
],
"pages_sent": 21,
"cost_usd": 0.1333,
"at": "2026-10-17T15:19:15"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906579659788288",
"pages": 21,
"sha256": "fffe9469b2ecde73",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "hcpl-0466-500e.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "hcpl-0466-500e-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ccb0f27e8c550f3d6a1fb9fc644b4392e226195e0975b2a949e52276627e16b1",
"checked": "2026-10-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}