main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs hcnw2201-500e: footprint re-picked to Broadcom_AVAGO_HCNW2201_b8f9e2 from the maker drawing · Ray
viewers hcnw2201-500e: viewers · Ray
hcnw2201-500e-etched.glb hcnw2201-500e: footprint re-picked to Broadcom_AVAGO_HCNW2201_b8f9e2 from the maker drawing · Ray
hcnw2201-500e-etched.step hcnw2201-500e: footprint re-picked to Broadcom_AVAGO_HCNW2201_b8f9e2 from the maker drawing · Ray
hcnw2201-500e-hero.glb Publish 0.1.2 · Ray
hcnw2201-500e-hero.overlay.json Publish 0.1.2 · Ray
hcnw2201-500e.glb hcnw2201-500e: footprint re-picked to Broadcom_AVAGO_HCNW2201_b8f9e2 from the maker drawing · Ray
hcnw2201-500e.kicad_mod hcnw2201-500e: footprint re-picked to Broadcom_AVAGO_HCNW2201_b8f9e2 from the maker drawing · Ray
hcnw2201-500e.kicad_sym hcnw2201-500e: pins 6/7 per the Broadcom HCPL-2201/11, HCPL-0201/11, HCNW2201/11 diagram (part-reviewer, AV02-0674EN p.… · Ray
hcnw2201-500e.lbr hcnw2201-500e: pins 6/7 per the Broadcom HCPL-2201/11, HCPL-0201/11, HCNW2201/11 diagram (part-reviewer, AV02-0674EN p.… · Ray
hcnw2201-500e.step hcnw2201-500e: footprint re-picked to Broadcom_AVAGO_HCNW2201_b8f9e2 from the maker drawing · Ray
package.json Publish 0.1.3 · Ray
page.json Publish 0.1.3 · Ray
README.md hcnw2201-500e: CAD wording names the Adom_Gen land, not KiCad official · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

HCNW2201-500E

Broadcom/AVAGO · Logic Output Optoisolators · DIP-8

HCNW2201-500E from Broadcom/AVAGO, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 NC unconnected Labelled NC (no connection) in the functional diagram; the datasheet assigns no function to this pin.
2 ANODE input LED anode input; the datasheet specifies an input forward current ON of 1.6 mA to 5 mA and a forward input voltage OFF of at most 0.8 V.
3 CATHODE input LED cathode input, forming the input diode with pin 2; input capacitance is measured between pin 2 and pin 3 for single-channel devices.
4 NC unconnected Labelled NC (no connection) in the functional diagram; the datasheet assigns no function to this pin.
5 GND power_in Ground reference for the detector side; a 0.1 µF bypass capacitor must be connected between pins 5 and 8.
6 NC unconnected Labelled NC (no connection) in the functional diagram; the datasheet assigns no function to this pin.
7 VO output Totem-pole logic output that needs no pull-up resistor, with a maximum average output current of 25 mA per the absolute maximum ratings.
8 VCC power_in Detector supply pin, recommended operating range 4.5 V to 20 V with an absolute maximum of 20 V, bypassed to pin 5 with 0.1 µF.

Key specifications

Parameter Value
Manufacturer Broadcom/AVAGO
Package DIP-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature TS -55 125 °C 11
Operating Temperature TA -40 85 °C 11
Average Forward Input Current IF(AVG) 10 mA Each channel 11
Peak Transient Input Current IF(TRAN) 1 A ≤1 µs pulse width, 300 pps 11
Peak Transient Input Current (HCNW22XX) IF(TRAN) 40 mA HCNW22XX; ≤200 µs pulse width, <1% duty cycle 11
Reverse Input Voltage (HCNW22XX) VR 3 V HCNW22XX 11
Average Output Current IO 25 mA Each channel 11
Supply Voltage VCC 0 20 V 11
Output Voltage VO -0.5 20 V Each channel 11
Total Package Power Dissipation PT 210 mW Derate 4.5 mW/°C above 70°C free-air temperature 11
Lead Solder Temperature (Through Hole) 260 °C 10 s, up to seating plane (HCNW22XX) 11
Power Supply Voltage VCC 4.5 20 V 11
Forward Input Current (ON) IF(ON) 1.6 5 mA 11
Forward Input Voltage (OFF) VF(OFF) 0.8 V 11
Operating Temperature TA -40 85 °C 11
Junction Temperature TJ -40 125 °C 11
Fan Out N 4 TTL Loads 11
Logic Low Output Voltage VOL 0.5 V IOL = 6.4 mA (4 TTL Loads) 12
Logic High Output Voltage VOH 2.4 V VIOH = -2.6 mA 12
Logic High Output Voltage VOH 2.7 V IOH = -0.4 mA 12
Output Leakage Current IOHH 100 µA VO = 5.5V; IF = 5 mA 12
Output Leakage Current IOHH 500 µA VO = 20V; IF = 5 mA 12
Logic Low Supply Current ICCL 3.7 6 mA VCC = 5.5V; VF = 0V, IO = Open 12
Logic Low Supply Current ICCL 4.3 7 mA VCC = 20V; VF = 0V, IO = Open 12
Logic High Supply Current ICCH 2.4 4 mA VCC = 5.5V; IF = 5 mA, IO = Open 12
Logic High Supply Current ICCH 2.7 5 mA VCC = 20V; IF = 5 mA, IO = Open 12
Logic Low Short Circuit Output Current IOSL 15 mA VO = VCC = 5.5V; VF = 0V 12
Logic Low Short Circuit Output Current IOSL 20 mA VO = VCC = 20V; VO = GND 12
Logic High Short Circuit Output Current IOSH -10 mA VCC = 5.5V; IF = 5 mA 12
Logic High Short Circuit Output Current IOSH -20 mA VCC = 20V; IF = 5 mA 12
Input Forward Voltage (HCNW22XX) VF 1.5 1.82 V TA = 25°C; IF = 5 mA 12
Input Forward Voltage (HCNW22XX) VF 1.95 V IF = 5 mA 12
Input Reverse Breakdown Voltage (HCNW22XX) BVR 3 V IR = 100 µA 12
Logic High Common Mode Transient Immunity (HCNW2201) /CMH/ 1000 V/μs /VCM/ = 50V, IF = 1.6 mA, VCC = 5V, TA = 25°C 13
Logic Low Common Mode Transient Immunity (HCNW2201) /CML/ 1000 V/μs /VCM/ = 50V, VF = 0V, VCC = 5V, TA = 25°C 13
Propagation Delay Time to Logic Low Output Level (with peaking capacitor) tPHL 150 300 ns With Peaking Capacitor 13
Propagation Delay Time to Logic High Output Level (with peaking capacitor) tPLH 90 300 ns With Peaking Capacitor 13
Input-Output Momentary Withstand Voltage (HCNW22XX) VISO 5000 Vrms TA = 25°C 14
Input-Output Capacitance (HCNW22XX) CI-O 0.5 0.6 pF TA = 25°C, VI-O = 0 Vdc 14

CAD (Adom-generated)

  • Symbol: HCNW2201-500E
  • Footprint: Adom_Gen:Broadcom_AVAGO_HCNW2201_b8f9e2
  • 3D model: generated to fit the land (STEP)
  • 3D model files: hcnw2201-500e-etched.step / hcnw2201-500e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcnw2201-500e.step / hcnw2201-500e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom/AVAGO datasheet (22 pp, sha256 9de63f98732aba71, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF