component
HC89S003AF4U7M
Public Made by Adomby adom
Shanghai Holychip Elec Microcontroller Units (MCUs/MPUs/SOCs), QFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 10d ago |
| viewers | 10d ago |
| hc89s003af4u7m-etched.glb | 10d ago |
| hc89s003af4u7m-etched.step | 10d ago |
| hc89s003af4u7m-hero.glb | 10d ago |
| hc89s003af4u7m-hero.overlay.json | 10d ago |
| hc89s003af4u7m.glb | 10d ago |
| hc89s003af4u7m.kicad_mod | 10d ago |
| hc89s003af4u7m.kicad_sym | 10d ago |
| hc89s003af4u7m.lbr | 10d ago |
| hc89s003af4u7m.step | 10d ago |
| package.json | 10d ago |
| page.json | 10d ago |
| README.md | 10d ago |
HC89S003AF4U7M
Shanghai Holychip Elec · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-20-EP(3x3)
HC89S003AF4U7M from Shanghai Holychip Elec, in a QFN-20-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.1 | bidirectional | General I/O port P0.1, also ADC channel 1 input (AN1), external interrupt 1 (INT1) and PWM1 fault-detection input (FLT1); the port is configurable as input, pull-up/pull-down input, Schmitt input, analog, push-pull or open-drain output. |
| 2 | P0.0 | bidirectional | General I/O port P0.0, also ADC channel 0 input (AN0), external interrupt 0 (INT0) and PWM0 fault-detection input (FLT0), whose debounce is set by the P00DBC register. |
| 3 | GND | power_in | Ground (power supply ground); the datasheet requires a capacitor of at least 0.1 µF between VDD and GND for system stability. |
| 4 | P1.0 | bidirectional | General I/O port P1.0, also external crystal input XIN, software-selectable external interrupt 0 (INT0_1) and comparator 2 positive input (CMP2+). |
| 5 | VDD | power_in | Power supply input, operating range 2.0 V to 5.5 V; the exposed pad under the package is connected to this pin. |
| 6 | P1.1 | bidirectional | General I/O port P1.1, also external crystal output XOUT, software-selectable external interrupt 1 (INT1_1) and comparator 3 positive input (CMP3+). |
| 7 | P2.7 | bidirectional | General I/O port P2.7, also external reset input RST (factory default, Schmitt input with pull-up), external interrupt 15 (INT15) and ADC channel 15 (AN15); it cannot be used as GPIO while configured as RST. |
| 8 | P2.6 | bidirectional | General I/O port P2.6, also JTAG TMS input, external interrupt 14 (INT14), ADC channel 14 (AN14), port low-voltage detection input PLVD (1.2 V threshold) and comparator negative input (CMP-). |
| 9 | P2.5 | bidirectional | General I/O port P2.5, also JTAG TCK input, external interrupt 13 (INT13), ADC channel 13 (AN13) and comparator 1 positive input (CMP1+). |
| 10 | P2.4 | bidirectional | General I/O port P2.4, also JTAG TDO data output, external interrupt 12 (INT12) and ADC channel 12 (AN12). |
| 11 | P2.3 | bidirectional | General I/O port P2.3, also JTAG TDI data input, external interrupt 11 (INT11) and ADC channel 11 (AN11). |
| 12 | P2.1 | bidirectional | General I/O port P2.1, also ADC channel 9 input (AN9), external interrupt 9 (INT9) and two-wire IIC data line SDA. |
| 13 | P2.2 | bidirectional | General I/O port P2.2, also ADC channel 10 input (AN10) and external interrupt 10 (INT10). |
| 14 | P2.0 | bidirectional | General I/O port P2.0, also ADC channel 8 input (AN8) and external interrupt 8 (INT8). |
| 15 | P0.7 | bidirectional | General I/O port P0.7, also ADC channel 7 input (AN7) and external interrupt 7 (INT7). |
| 16 | P0.6 | bidirectional | General I/O port P0.6, also ADC channel 6 input (AN6) and external interrupt 6 (INT6). |
| 17 | P0.5 | bidirectional | General I/O port P0.5, also ADC channel 5 input (AN5) and external interrupt 5 (INT5). |
| 18 | P0.4 | bidirectional | General I/O port P0.4, also ADC channel 4 input (AN4), ADC external reference voltage input/output Vref (must be analog input when used) and external interrupt 4 (INT4). |
| 19 | P0.3 | bidirectional | General I/O port P0.3, also ADC channel 3 input (AN3), external interrupt 3 (INT3) and two-wire mode clock input SCK. |
| 20 | P0.2 | bidirectional | General I/O port P0.2, also ADC channel 2 input (AN2), external interrupt 2 (INT2) and PWM2 fault-detection input (FLT2). |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Holychip Elec |
| Package | QFN-20-EP(3x3) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC supply voltage | VDD | -0.3 | 6 | V | 168 | ||
| Operating ambient temperature | TOTG | -40 | 105 | °C | 168 | ||
| Storage temperature | TSTG | -55 | 125 | °C | 168 | ||
| Maximum current flowing through VDD | 100 | mA | 5.0V, 25°C | 168 | |||
| Maximum current flowing through GND | 150 | mA | 5.0V, 25°C | 168 | |||
| Operating voltage | VDD | 2 | 5 | 5.5 | V | FCPU =16MHz 或 44KHz，ADC模块关闭 | 168 |
| ADC supply voltage | VAD | 2 | 5 | 5.5 | V | 171 | |
| ADC accuracy (resolution) | NR | 10 | 12 | bit | GND≤VAIN≤Vref | 171 | |
| ADC input resistance | RAIN | 2 | MΩ | VAIN：5V | 171 | ||
| Recommended analog voltage source impedance | ZAIN | 10 | kΩ | 171 | |||
| ADC conversion current | IAD | 0.6 | 1 | mA | ADC模块打开，VDD：5.0V | 171 | |
| ADC input current | IADIN | 10 | μA | VDD：5.0V | 171 | ||
| Differential nonlinearity error | DLE | -2 | 2 | LSB | VDD：5.0V | 171 | |
| Integral nonlinearity error (1MHz conversion frequency), Vref=1.3V | ILE | -5 | 2 | LSB | 1MHz 转换频率; VDD=5.0V，Vref =1.3V | 171 | |
| Integral nonlinearity error (1MHz conversion frequency), Vref=2V | ILE | -5 | 2 | LSB | 1MHz 转换频率; VDD=5.0V，Vref =2V | 171 | |
| Integral nonlinearity error (1MHz conversion frequency), Vref=3V | ILE | -4 | 2 | LSB | 1MHz 转换频率; VDD=5.0V，Vref =3V | 171 | |
| Integral nonlinearity error (1MHz conversion frequency), Vref=4V | ILE | -3 | 2 | LSB | 1MHz 转换频率; VDD=5.0V，Vref =4V | 171 | |
| Integral nonlinearity error (1MHz conversion frequency), Vref=VDD | ILE | -2 | 2 | LSB | 1MHz 转换频率; VDD=5.0V，Vref =VDD | 171 | |
| Integral nonlinearity error (1MHz conversion frequency), external Vref | ILE | -2 | 2 | LSB | 1MHz 转换频率; VDD=5.0V，Vref =外参 | 171 | |
| Full-scale error | EF | -5 | 5 | LSB | VDD=5.0V | 171 | |
| Offset error | EZ | -3 | 3 | LSB | VDD=5.0V | 171 | |
| Total absolute error | EAD | -5 | 5 | LSB | VDD=5.0V | 171 | |
| Total conversion time 1 | TCON1 | 10 | μs | VDD=5.0V，Vref =2/3/4V | 171 | ||
| Total conversion time 2 | TCON2 | 2 | μs | VDD=5.0V，Vref =VDD | 171 | ||
| Flash read/write endurance | NENDUR | 100000 | Cycle | 171 | |||
| BOR threshold 1 | VBOR1 | 1.7 | 1.8 | 1.9 | V | BOR 使能，VDD：2V~5.5V | 172 |
| BOR threshold 2 | VBOR2 | 1.9 | 2 | 2.1 | V | 172 | |
| BOR threshold 3 | VBOR3 | 2.3 | 2.4 | 2.5 | V | 172 | |
| BOR threshold 4 | VBOR4 | 2.5 | 2.6 | 2.7 | V | 172 | |
| BOR threshold 5 | VBOR5 | 2.9 | 3 | 3.1 | V | 172 | |
| BOR threshold 6 | VBOR6 | 3.5 | 3.6 | 3.7 | V | 172 | |
| BOR threshold 7 | VBOR7 | 3.8 | 3.9 | 4 | V | 172 | |
| BOR threshold 8 | VBOR8 | 4.1 | 4.2 | 4.3 | V | 172 | |
| LVD threshold 1 | VLVD1 | 1.8 | 1.9 | 2 | V | 172 | |
| LVD threshold 2 | VLVD2 | 1.9 | 2 | 2.1 | V | 172 | |
| LVD threshold 3 | VLVD3 | 2.3 | 2.4 | 2.5 | V | 172 | |
| LVD threshold 4 | VLVD4 | 2.5 | 2.6 | 2.7 | V | 172 | |
| LVD threshold 5 | VLVD5 | 2.9 | 3 | 3.1 | V | 172 | |
| LVD threshold 6 | VLVD6 | 3.5 | 3.6 | 3.7 | V | 172 | |
| LVD threshold 7 | VLVD7 | 3.8 | 3.9 | 4 | V | 172 | |
| LVD threshold 8 | VLVD8 | 4.1 | 4.2 | 4.3 | V | 172 | |
| Comparator input offset voltage | VOS | -4 | 4 | mV | VDD=5V | 172 | |
| Comparator input common-mode voltage range | VICM | 0 | V | VDD=5V | 172 | ||
| Comparator operating current | ICOMP | 200 | 400 | nA | 172 | ||
| Comparator small-signal response time | TRS1 | 1 | 2 | us | VDD=5V, CMPP=1.25V, CMPN=1.2V | 172 | |
| Comparator large-signal response time | TRS2 | 0.3 | 0.5 | us | VDD=5V, CMPP=3V, CMPN=1V | 172 | |
| Comparator signal source output impedance | Rin | 1 | MΩ | VDD=5V | 172 | ||
| ESD HBM classification | 5500 | V | Class 3A | 175 | |||
| ESD MM classification | 400 | V | Class C | 175 | |||
| ESD CDM classification | 1000 | V | Class C3 | 175 | |||
| Electrical fast transient (EFT) | -4800 | 4800 | V | 175 |
CAD (KiCad official)
- Symbol:
HC89S003AF4U7M - Footprint:
Package_DFN_QFN:UQFN-20-1EP_3x3mm_P0.4mm_EP1.85x1.85mm - 3D model: QFN-20-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
hc89s003af4u7m-etched.step/hc89s003af4u7m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc89s003af4u7m.step/hc89s003af4u7m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Holychip Elec datasheet (180 pp, sha256
1c5d28a8a2b0f75f, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).