main
Ray
Publish 0.1.0
d434493
HC32F420KATB-LQFP64
XHSC · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
HC32F420KATB-LQFP64 from XHSC, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PD03 | bidirectional | GPIO PD03 with alternate functions ATIM0_BK, CTIM0_CH0, CTIM1_TOGP, ATIM3_BK and USART2_TXD; IO resets to analog input state. |
| 2 | PC13 | bidirectional | GPIO PC13 with analog LVDIN0 low-voltage detector input and alternate functions SPI0_SCK, CTIM2_CH0, I2C1_SCL, ATIM3_CH0A and USART3_NCTS. |
| 3 | PC14 | bidirectional | GPIO PC14 with alternate functions SPI0_MISO, CTIM2_CH1, I2C1_SDA, ATIM3_CH1A and USART3_NRTS; IO resets to analog input state. |
| 4 | PC15 | bidirectional | GPIO PC15 with alternate functions SPI0_MOSI, CTIM2_ETR, ATIM3_CH2A and USART3_SCK; IO resets to analog input state. |
| 5 | PD00 | bidirectional | GPIO PD00 shared with XTH crystal input XTHI (8 to 32 MHz external high-speed oscillator) and alternate functions SPI0_CS, CTIM0_CH2, I2C0_SCL, ATIM3_CH0B and I2C1_SCL. |
| 6 | PD01 | bidirectional | GPIO PD01 shared with XTH crystal output XTHO and alternate functions LVD_OUT, CTIM0_CH3, I2C0_SDA, ATIM3_CH2B and I2C1_SDA. |
| 7 | NRESET | input | Active-low reset input with an internal pull-up of about 80 kOhm (typ) that cannot be disconnected; input low level is -0.3 to 0.8 V. |
| 8 | PC00 | bidirectional | GPIO PC00 with analog input AIN10 and alternate functions ATIM0_BK, CTIM1_TOGP, CTRIM_ETRTOG and SPI0_MISO. |
| 9 | PC01 | bidirectional | GPIO PC01 with analog input AIN11 and alternate functions ATIM0_CH0A, CTIM1_TOGN, SPI0_MOSI. |
| 10 | PC02 | bidirectional | GPIO PC02 with analog input AIN12 and alternate functions ATIM0_CH0B, SPI0_CS, SPI1_MISO and USART0_NCTS. |
| 11 | PC03 | bidirectional | GPIO PC03 with analog input AIN13 and alternate functions ATIM0_GATE, SPI0_SCK, SPI1_MOSI and USART0_NRTS. |
| 12 | AVSS | power_in | Analog ground, must be connected to the system ground. |
| 13 | AVCC | power_in | Analog supply, must be the same as DVCC (2.0 to 5.5 V); DVCC to AVCC difference at most 300 mV. |
| 14 | PA00 | bidirectional | GPIO PA00 with analog inputs AIN0/VCIN0 and alternate functions ATIM0_ETR, CTIM0_CH0, CTIM0_ETR, VC0_OUT and USART1_NCTS. |
| 15 | PA01 | bidirectional | GPIO PA01 with analog inputs AIN1/VCIN1 and alternate functions MCO, CTIM0_CH1, SPI1_CS, USART2_NCTS and USART1_NRTS. |
| 16 | PA02 | bidirectional | GPIO PA02 with analog inputs AIN2/VCIN2 and alternate functions CTIM1_TOGN, CTIM0_CH2, VC1_OUT, USART3_NRTS and USART1_TXD. |
| 17 | PA03 | bidirectional | GPIO PA03 with analog inputs AIN3/VCIN3 and alternate functions LVD_OUT, CTIM0_CH3, SPI1_SCK, USART3_TXD and USART1_RXD. |
| 18 | DVSS | power_in | Digital ground, must be connected to the system ground. |
| 19 | DVCC | power_in | Digital supply, 2.0 to 5.5 V standard operating voltage. |
| 20 | PA04 | bidirectional | GPIO PA04 with analog input AIN4/VCIN4 and alternate functions ATIM3_CH0A, PCLK0_OUT, SPI0_CS, USART3_RXD and USART1_SCK. |
| 21 | PA05 | bidirectional | GPIO PA05 with analog inputs AIN5/VCIN5 and alternate functions ATIM3_CH1A, CTIM0_CH0, CTIM0_ETR, USART3_NCTS and SPI0_SCK. |
| 22 | PA06 | bidirectional | GPIO PA06 with analog input AIN6 and alternate functions ATIM3_CH2A, USART2_RXD, CTIM1_CH0, ATIM3_BK and SPI0_MISO. |
| 23 | PA07 | bidirectional | GPIO PA07 with analog input AIN7 and alternate functions ATIM3_CH0B, USART3_TXD, CTIM1_CH1, USART2_NRTS and SPI0_MOSI. |
| 24 | PC04 | bidirectional | GPIO PC04 with analog input AIN14 and alternate functions ATIM3_CH1B, I2C0_SCL and USART0_SCK. |
| 25 | PC05 | bidirectional | GPIO PC05 with analog input AIN15 and alternate functions ATIM3_CH2B, CTIM0_TOGP, I2C0_SDA and ATIM0_ETR. |
| 26 | PB00 | bidirectional | GPIO PB00 with analog inputs AIN8/VCIN6 and alternate functions ATIM3_CH1B, CTIM2_ETR, CTIM1_CH2, ATIM0_CH0A and USART3_SCK. |
| 27 | PB01 | bidirectional | GPIO PB01 with analog inputs AIN9/ExRef/VCIN7 (ExRef is the external ADC reference) and alternate functions ATIM3_CH2B, CTIM2_TOGP, CTIM1_CH3, ATIM0_CH0B and PCLK1_OUT. |
| 28 | PB02 | bidirectional | GPIO PB02 with alternate functions CTIM0_CH3, CTIM2_TOGN, ATIM3_GATE, ATIM0_GATE and USART2_RXD. |
| 29 | PB10 | bidirectional | GPIO PB10 with alternate functions CTIM0_CH2, I2C1_SCL and USART2_TXD. |
| 30 | VCAP | power_out | LDO core supply output for internal circuits only; requires an external decoupling capacitor per the supply scheme in Section 6.1.3. |
| 31 | DVSS | power_in | Digital ground, must be connected to the system ground. |
| 32 | DVCC | power_in | Digital supply, 2.0 to 5.5 V standard operating voltage. |
| 33 | PB12 | bidirectional | GPIO PB12 with analog input VCIN8 and alternate functions I2C0_SCL, ATIM3_BK, CTRIM_ETRTOG, SPI1_CS and USART2_SCK. |
| 34 | PB13 | bidirectional | GPIO PB13 with alternate functions I2C0_SDA, ATIM3_CH0B, SPI1_SCK and USART2_NCTS. |
| 35 | PB14 | bidirectional | GPIO PB14 with alternate functions ATIM3_CH1B, CTIM1_TOGP, SPI1_MISO and USART2_NRTS. |
| 36 | PB15 | bidirectional | GPIO PB15 with alternate functions MCO, ATIM3_CH2B, CTIM1_TOGN and SPI1_MOSI. |
| 37 | PC06 | bidirectional | GPIO PC06 with alternate functions ATIM3_ETR, CTIM2_CH0, CTIM1_CH0 and USART2_NCTS. |
| 38 | PC07 | bidirectional | GPIO PC07 with alternate functions CTIM2_CH1, CTIM1_CH1, SPI1_SCK and USART2_NRTS. |
| 39 | PC08 | bidirectional | GPIO PC08 with alternate functions I2C1_SCL, CTIM2_CH2, CTIM1_CH2 and USART2_SCK. |
| 40 | PC09 | bidirectional | GPIO PC09 with alternate functions I2C1_SDA, CTIM2_CH3 and CTIM1_CH3. |
| 41 | PA08 | bidirectional | GPIO PA08 with alternate functions CTIM0_TOGP, ATIM3_CH0A, CTRIM_ETRTOG, USART3_RXD and USART0_SCK. |
| 42 | PA09 | bidirectional | GPIO PA09 with alternate functions CTIM0_TOGN, ATIM3_CH1A, ATIM0_BK, CTIM1_CH2 and USART0_TXD. |
| 43 | PA10 | bidirectional | GPIO PA10 with alternate functions I2C1_SCL, ATIM3_CH2A, ATIM0_CH0A, CTIM1_CH3 and USART0_RXD. |
| 44 | PA11 | bidirectional | GPIO PA11 with alternate functions VC0_OUT, ATIM3_GATE, ATIM0_CH0B, USART1_NCTS and USART0_NCTS. |
| 45 | PA12 | bidirectional | GPIO PA12 with alternate functions VC1_OUT, ATIM3_ETR, ATIM0_GATE, USART1_NRTS and USART0_NRTS. |
| 46 | PA13 | bidirectional | GPIO PA13 with alternate functions ATIM3_BK, CTIM2_CH2, ATIM0_ETR, USART1_RXD and I2C0_SCL. |
| 47 | DVSS | power_in | Digital ground, must be connected to the system ground. |
| 48 | DVCC | power_in | Digital supply, 2.0 to 5.5 V standard operating voltage. |
| 49 | PA14 | bidirectional | GPIO PA14 with alternate functions CTIM0_CH1, CTIM2_CH3, USART2_SCK, USART1_TXD and I2C0_SDA. |
| 50 | PA15 | bidirectional | GPIO PA15 with alternate functions SPI0_CS, CTIM1_CH0, CTIM1_ETR, USART1_SCK and USART0_TXD. |
| 51 | PC10 | bidirectional | GPIO PC10 with alternate functions USART3_TXD, ATIM3_CH0A and ATIM0_CH0A. |
| 52 | PC11 | bidirectional | GPIO PC11 with alternate functions CTIM0_TOGN, USART3_RXD, ATIM3_CH1A and ATIM0_CH0B. |
| 53 | PC12 | bidirectional | GPIO PC12 with alternate functions USART3_NCTS, CTIM2_ETR, ATIM3_CH2A and ATIM0_GATE. |
| 54 | PD02 | bidirectional | GPIO PD02 with alternate functions USART3_NRTS, CTIM1_ETR, ATIM3_CH0B and ATIM0_ETR. |
| 55 | PB03 | bidirectional | GPIO PB03 with alternate functions CTIM0_CH1, USART0_RXD, I2C1_SDA, ATIM3_CH1B and SPI0_SCK. |
| 56 | PB04 | bidirectional | GPIO PB04 with analog input VCIN9 and alternate functions CTIM1_CH0, CTIM2_TOGP, PCLK0_OUT, ATIM3_CH2B and SPI0_MISO. |
| 57 | PB05 | bidirectional | GPIO PB05 with analog input VCIN10 and alternate functions CTIM1_CH1, CTIM2_TOGN, USART3_SCK, USART2_TXD and SPI0_MOSI. |
| 58 | PB06 | bidirectional | GPIO PB06 with alternate functions USART0_TXD, CTIM2_CH0, SPI1_MISO, I2C0_SCL and USART2_RXD. |
| 59 | PB07 | bidirectional | GPIO PB07 with analog LVDIN1 low-voltage detector input and alternate functions USART0_RXD, CTIM2_CH1, SPI1_MOSI, I2C0_SDA and PCLK1_OUT. |
| 60 | PB11/BOOT0 | bidirectional | GPIO PB11 that doubles as BOOT0; BOOT0 high at power-on, external RESET or LVD reset enters ISP online programming mode, low selects normal operation. |
| 61 | PB08 | bidirectional | GPIO PB08 with analog LVDIN2 low-voltage detector input and alternate functions CTRIM_ETRTOG, CTIM2_CH2, I2C0_SCL and ATIM0_BK. |
| 62 | PB09 | bidirectional | GPIO PB09 with alternate functions SPI1_CS, CTIM2_CH3, I2C0_SDA and I2C1_SDA. |
| 63 | DVSS | power_in | Digital ground, must be connected to the system ground. |
| 64 | DVCC | power_in | Digital supply, 2.0 to 5.5 V standard operating voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XHSC |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| LVD detection threshold (LVD_CR.VTDS=0b0000) | Vlevel | 1.7 | 1.8 | 1.9 | V | LVD_CR.VTDS = 0b0000 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0001) | Vlevel | 1.8 | 1.9 | 2 | V | LVD_CR.VTDS = 0b0001 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0010) | Vlevel | 1.89 | 2 | 2.11 | V | LVD_CR.VTDS = 0b0010 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0011) | Vlevel | 1.98 | 2.1 | 2.22 | V | LVD_CR.VTDS = 0b0011 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0100) | Vlevel | 2.08 | 2.2 | 2.32 | V | LVD_CR.VTDS = 0b0100 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0101) | Vlevel | 2.17 | 2.3 | 2.43 | V | LVD_CR.VTDS = 0b0101 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0110) | Vlevel | 2.27 | 2.4 | 2.53 | V | LVD_CR.VTDS = 0b0110 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0111) | Vlevel | 2.36 | 2.5 | 2.64 | V | LVD_CR.VTDS = 0b0111 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1000) | Vlevel | 2.46 | 2.6 | 2.74 | V | LVD_CR.VTDS = 0b1000 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1001) | Vlevel | 2.55 | 2.7 | 2.85 | V | LVD_CR.VTDS = 0b1001 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1010) | Vlevel | 2.65 | 2.8 | 2.95 | V | LVD_CR.VTDS = 0b1010 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1011) | Vlevel | 2.74 | 2.9 | 3.06 | V | LVD_CR.VTDS = 0b1011 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1100) | Vlevel | 2.84 | 3 | 3.17 | V | LVD_CR.VTDS = 0b1100 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1101) | Vlevel | 2.93 | 3.1 | 3.27 | V | LVD_CR.VTDS = 0b1101 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1110) | Vlevel | 3.02 | 3.2 | 3.38 | V | LVD_CR.VTDS = 0b1110 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1111) | Vlevel | 3.12 | 3.3 | 3.48 | V | LVD_CR.VTDS = 0b1111 | 35 |
| External input voltage range for LVD | Vex | 0 | V | 35 | |||
| Internal 2.5V reference voltage | VREF25 | 2.475 | 2.5 | 2.525 | V | 常温 25°C VCC=3.3V | 35 |
| Internal 2.5V reference voltage | VREF25 | 2.463 | 2.5 | 2.538 | V | -40 ~ 105°C VCC=2.8V~5.5V | 35 |
| Internal 1.5V reference voltage | VREF15 | 1.485 | 1.5 | 1.515 | V | 常温 25°C VCC=3.3V | 35 |
| Internal 1.5V reference voltage | VREF15 | 1.477 | 1.5 | 1.523 | V | -40 ~ 105°C VCC=2.0V~5.5V | 35 |
CAD (KiCad official)
- Symbol:
HC32F420KATB-LQFP64 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
hc32f420katb-lqfp64-etched.step/hc32f420katb-lqfp64-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc32f420katb-lqfp64.step/hc32f420katb-lqfp64.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XHSC datasheet (66 pp, sha256
c5ceedab630019d8, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HC32F420KATB-LQFP64
**XHSC** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
HC32F420KATB-LQFP64 from XHSC, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PD03 | bidirectional | GPIO PD03 with alternate functions ATIM0_BK, CTIM0_CH0, CTIM1_TOGP, ATIM3_BK and USART2_TXD; IO resets to analog input state. |
| 2 | PC13 | bidirectional | GPIO PC13 with analog LVDIN0 low-voltage detector input and alternate functions SPI0_SCK, CTIM2_CH0, I2C1_SCL, ATIM3_CH0A and USART3_NCTS. |
| 3 | PC14 | bidirectional | GPIO PC14 with alternate functions SPI0_MISO, CTIM2_CH1, I2C1_SDA, ATIM3_CH1A and USART3_NRTS; IO resets to analog input state. |
| 4 | PC15 | bidirectional | GPIO PC15 with alternate functions SPI0_MOSI, CTIM2_ETR, ATIM3_CH2A and USART3_SCK; IO resets to analog input state. |
| 5 | PD00 | bidirectional | GPIO PD00 shared with XTH crystal input XTHI (8 to 32 MHz external high-speed oscillator) and alternate functions SPI0_CS, CTIM0_CH2, I2C0_SCL, ATIM3_CH0B and I2C1_SCL. |
| 6 | PD01 | bidirectional | GPIO PD01 shared with XTH crystal output XTHO and alternate functions LVD_OUT, CTIM0_CH3, I2C0_SDA, ATIM3_CH2B and I2C1_SDA. |
| 7 | NRESET | input | Active-low reset input with an internal pull-up of about 80 kOhm (typ) that cannot be disconnected; input low level is -0.3 to 0.8 V. |
| 8 | PC00 | bidirectional | GPIO PC00 with analog input AIN10 and alternate functions ATIM0_BK, CTIM1_TOGP, CTRIM_ETRTOG and SPI0_MISO. |
| 9 | PC01 | bidirectional | GPIO PC01 with analog input AIN11 and alternate functions ATIM0_CH0A, CTIM1_TOGN, SPI0_MOSI. |
| 10 | PC02 | bidirectional | GPIO PC02 with analog input AIN12 and alternate functions ATIM0_CH0B, SPI0_CS, SPI1_MISO and USART0_NCTS. |
| 11 | PC03 | bidirectional | GPIO PC03 with analog input AIN13 and alternate functions ATIM0_GATE, SPI0_SCK, SPI1_MOSI and USART0_NRTS. |
| 12 | AVSS | power_in | Analog ground, must be connected to the system ground. |
| 13 | AVCC | power_in | Analog supply, must be the same as DVCC (2.0 to 5.5 V); DVCC to AVCC difference at most 300 mV. |
| 14 | PA00 | bidirectional | GPIO PA00 with analog inputs AIN0/VCIN0 and alternate functions ATIM0_ETR, CTIM0_CH0, CTIM0_ETR, VC0_OUT and USART1_NCTS. |
| 15 | PA01 | bidirectional | GPIO PA01 with analog inputs AIN1/VCIN1 and alternate functions MCO, CTIM0_CH1, SPI1_CS, USART2_NCTS and USART1_NRTS. |
| 16 | PA02 | bidirectional | GPIO PA02 with analog inputs AIN2/VCIN2 and alternate functions CTIM1_TOGN, CTIM0_CH2, VC1_OUT, USART3_NRTS and USART1_TXD. |
| 17 | PA03 | bidirectional | GPIO PA03 with analog inputs AIN3/VCIN3 and alternate functions LVD_OUT, CTIM0_CH3, SPI1_SCK, USART3_TXD and USART1_RXD. |
| 18 | DVSS | power_in | Digital ground, must be connected to the system ground. |
| 19 | DVCC | power_in | Digital supply, 2.0 to 5.5 V standard operating voltage. |
| 20 | PA04 | bidirectional | GPIO PA04 with analog input AIN4/VCIN4 and alternate functions ATIM3_CH0A, PCLK0_OUT, SPI0_CS, USART3_RXD and USART1_SCK. |
| 21 | PA05 | bidirectional | GPIO PA05 with analog inputs AIN5/VCIN5 and alternate functions ATIM3_CH1A, CTIM0_CH0, CTIM0_ETR, USART3_NCTS and SPI0_SCK. |
| 22 | PA06 | bidirectional | GPIO PA06 with analog input AIN6 and alternate functions ATIM3_CH2A, USART2_RXD, CTIM1_CH0, ATIM3_BK and SPI0_MISO. |
| 23 | PA07 | bidirectional | GPIO PA07 with analog input AIN7 and alternate functions ATIM3_CH0B, USART3_TXD, CTIM1_CH1, USART2_NRTS and SPI0_MOSI. |
| 24 | PC04 | bidirectional | GPIO PC04 with analog input AIN14 and alternate functions ATIM3_CH1B, I2C0_SCL and USART0_SCK. |
| 25 | PC05 | bidirectional | GPIO PC05 with analog input AIN15 and alternate functions ATIM3_CH2B, CTIM0_TOGP, I2C0_SDA and ATIM0_ETR. |
| 26 | PB00 | bidirectional | GPIO PB00 with analog inputs AIN8/VCIN6 and alternate functions ATIM3_CH1B, CTIM2_ETR, CTIM1_CH2, ATIM0_CH0A and USART3_SCK. |
| 27 | PB01 | bidirectional | GPIO PB01 with analog inputs AIN9/ExRef/VCIN7 (ExRef is the external ADC reference) and alternate functions ATIM3_CH2B, CTIM2_TOGP, CTIM1_CH3, ATIM0_CH0B and PCLK1_OUT. |
| 28 | PB02 | bidirectional | GPIO PB02 with alternate functions CTIM0_CH3, CTIM2_TOGN, ATIM3_GATE, ATIM0_GATE and USART2_RXD. |
| 29 | PB10 | bidirectional | GPIO PB10 with alternate functions CTIM0_CH2, I2C1_SCL and USART2_TXD. |
| 30 | VCAP | power_out | LDO core supply output for internal circuits only; requires an external decoupling capacitor per the supply scheme in Section 6.1.3. |
| 31 | DVSS | power_in | Digital ground, must be connected to the system ground. |
| 32 | DVCC | power_in | Digital supply, 2.0 to 5.5 V standard operating voltage. |
| 33 | PB12 | bidirectional | GPIO PB12 with analog input VCIN8 and alternate functions I2C0_SCL, ATIM3_BK, CTRIM_ETRTOG, SPI1_CS and USART2_SCK. |
| 34 | PB13 | bidirectional | GPIO PB13 with alternate functions I2C0_SDA, ATIM3_CH0B, SPI1_SCK and USART2_NCTS. |
| 35 | PB14 | bidirectional | GPIO PB14 with alternate functions ATIM3_CH1B, CTIM1_TOGP, SPI1_MISO and USART2_NRTS. |
| 36 | PB15 | bidirectional | GPIO PB15 with alternate functions MCO, ATIM3_CH2B, CTIM1_TOGN and SPI1_MOSI. |
| 37 | PC06 | bidirectional | GPIO PC06 with alternate functions ATIM3_ETR, CTIM2_CH0, CTIM1_CH0 and USART2_NCTS. |
| 38 | PC07 | bidirectional | GPIO PC07 with alternate functions CTIM2_CH1, CTIM1_CH1, SPI1_SCK and USART2_NRTS. |
| 39 | PC08 | bidirectional | GPIO PC08 with alternate functions I2C1_SCL, CTIM2_CH2, CTIM1_CH2 and USART2_SCK. |
| 40 | PC09 | bidirectional | GPIO PC09 with alternate functions I2C1_SDA, CTIM2_CH3 and CTIM1_CH3. |
| 41 | PA08 | bidirectional | GPIO PA08 with alternate functions CTIM0_TOGP, ATIM3_CH0A, CTRIM_ETRTOG, USART3_RXD and USART0_SCK. |
| 42 | PA09 | bidirectional | GPIO PA09 with alternate functions CTIM0_TOGN, ATIM3_CH1A, ATIM0_BK, CTIM1_CH2 and USART0_TXD. |
| 43 | PA10 | bidirectional | GPIO PA10 with alternate functions I2C1_SCL, ATIM3_CH2A, ATIM0_CH0A, CTIM1_CH3 and USART0_RXD. |
| 44 | PA11 | bidirectional | GPIO PA11 with alternate functions VC0_OUT, ATIM3_GATE, ATIM0_CH0B, USART1_NCTS and USART0_NCTS. |
| 45 | PA12 | bidirectional | GPIO PA12 with alternate functions VC1_OUT, ATIM3_ETR, ATIM0_GATE, USART1_NRTS and USART0_NRTS. |
| 46 | PA13 | bidirectional | GPIO PA13 with alternate functions ATIM3_BK, CTIM2_CH2, ATIM0_ETR, USART1_RXD and I2C0_SCL. |
| 47 | DVSS | power_in | Digital ground, must be connected to the system ground. |
| 48 | DVCC | power_in | Digital supply, 2.0 to 5.5 V standard operating voltage. |
| 49 | PA14 | bidirectional | GPIO PA14 with alternate functions CTIM0_CH1, CTIM2_CH3, USART2_SCK, USART1_TXD and I2C0_SDA. |
| 50 | PA15 | bidirectional | GPIO PA15 with alternate functions SPI0_CS, CTIM1_CH0, CTIM1_ETR, USART1_SCK and USART0_TXD. |
| 51 | PC10 | bidirectional | GPIO PC10 with alternate functions USART3_TXD, ATIM3_CH0A and ATIM0_CH0A. |
| 52 | PC11 | bidirectional | GPIO PC11 with alternate functions CTIM0_TOGN, USART3_RXD, ATIM3_CH1A and ATIM0_CH0B. |
| 53 | PC12 | bidirectional | GPIO PC12 with alternate functions USART3_NCTS, CTIM2_ETR, ATIM3_CH2A and ATIM0_GATE. |
| 54 | PD02 | bidirectional | GPIO PD02 with alternate functions USART3_NRTS, CTIM1_ETR, ATIM3_CH0B and ATIM0_ETR. |
| 55 | PB03 | bidirectional | GPIO PB03 with alternate functions CTIM0_CH1, USART0_RXD, I2C1_SDA, ATIM3_CH1B and SPI0_SCK. |
| 56 | PB04 | bidirectional | GPIO PB04 with analog input VCIN9 and alternate functions CTIM1_CH0, CTIM2_TOGP, PCLK0_OUT, ATIM3_CH2B and SPI0_MISO. |
| 57 | PB05 | bidirectional | GPIO PB05 with analog input VCIN10 and alternate functions CTIM1_CH1, CTIM2_TOGN, USART3_SCK, USART2_TXD and SPI0_MOSI. |
| 58 | PB06 | bidirectional | GPIO PB06 with alternate functions USART0_TXD, CTIM2_CH0, SPI1_MISO, I2C0_SCL and USART2_RXD. |
| 59 | PB07 | bidirectional | GPIO PB07 with analog LVDIN1 low-voltage detector input and alternate functions USART0_RXD, CTIM2_CH1, SPI1_MOSI, I2C0_SDA and PCLK1_OUT. |
| 60 | PB11/BOOT0 | bidirectional | GPIO PB11 that doubles as BOOT0; BOOT0 high at power-on, external RESET or LVD reset enters ISP online programming mode, low selects normal operation. |
| 61 | PB08 | bidirectional | GPIO PB08 with analog LVDIN2 low-voltage detector input and alternate functions CTRIM_ETRTOG, CTIM2_CH2, I2C0_SCL and ATIM0_BK. |
| 62 | PB09 | bidirectional | GPIO PB09 with alternate functions SPI1_CS, CTIM2_CH3, I2C0_SDA and I2C1_SDA. |
| 63 | DVSS | power_in | Digital ground, must be connected to the system ground. |
| 64 | DVCC | power_in | Digital supply, 2.0 to 5.5 V standard operating voltage. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XHSC |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| LVD detection threshold (LVD_CR.VTDS=0b0000) | Vlevel | 1.7 | 1.8 | 1.9 | V | LVD_CR.VTDS = 0b0000 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0001) | Vlevel | 1.8 | 1.9 | 2 | V | LVD_CR.VTDS = 0b0001 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0010) | Vlevel | 1.89 | 2 | 2.11 | V | LVD_CR.VTDS = 0b0010 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0011) | Vlevel | 1.98 | 2.1 | 2.22 | V | LVD_CR.VTDS = 0b0011 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0100) | Vlevel | 2.08 | 2.2 | 2.32 | V | LVD_CR.VTDS = 0b0100 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0101) | Vlevel | 2.17 | 2.3 | 2.43 | V | LVD_CR.VTDS = 0b0101 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0110) | Vlevel | 2.27 | 2.4 | 2.53 | V | LVD_CR.VTDS = 0b0110 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b0111) | Vlevel | 2.36 | 2.5 | 2.64 | V | LVD_CR.VTDS = 0b0111 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1000) | Vlevel | 2.46 | 2.6 | 2.74 | V | LVD_CR.VTDS = 0b1000 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1001) | Vlevel | 2.55 | 2.7 | 2.85 | V | LVD_CR.VTDS = 0b1001 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1010) | Vlevel | 2.65 | 2.8 | 2.95 | V | LVD_CR.VTDS = 0b1010 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1011) | Vlevel | 2.74 | 2.9 | 3.06 | V | LVD_CR.VTDS = 0b1011 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1100) | Vlevel | 2.84 | 3 | 3.17 | V | LVD_CR.VTDS = 0b1100 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1101) | Vlevel | 2.93 | 3.1 | 3.27 | V | LVD_CR.VTDS = 0b1101 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1110) | Vlevel | 3.02 | 3.2 | 3.38 | V | LVD_CR.VTDS = 0b1110 | 35 |
| LVD detection threshold (LVD_CR.VTDS=0b1111) | Vlevel | 3.12 | 3.3 | 3.48 | V | LVD_CR.VTDS = 0b1111 | 35 |
| External input voltage range for LVD | Vex | 0 | | | V | | 35 |
| Internal 2.5V reference voltage | VREF25 | 2.475 | 2.5 | 2.525 | V | 常温 25°C VCC=3.3V | 35 |
| Internal 2.5V reference voltage | VREF25 | 2.463 | 2.5 | 2.538 | V | -40 ~ 105°C VCC=2.8V~5.5V | 35 |
| Internal 1.5V reference voltage | VREF15 | 1.485 | 1.5 | 1.515 | V | 常温 25°C VCC=3.3V | 35 |
| Internal 1.5V reference voltage | VREF15 | 1.477 | 1.5 | 1.523 | V | -40 ~ 105°C VCC=2.0V~5.5V | 35 |
## CAD (KiCad official)
- Symbol: `HC32F420KATB-LQFP64`
- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`
- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `hc32f420katb-lqfp64-etched.step` / `hc32f420katb-lqfp64-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hc32f420katb-lqfp64.step` / `hc32f420katb-lqfp64.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XHSC datasheet](docs/hc32f420katb-lqfp64-datasheet.pdf) (66 pp, sha256 `c5ceedab630019d8`, retrieved 2026-11-13, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hc32f420katb-lqfp64-datasheet.pdf)