component
HC32F334KATI-LQFP64
Public Made by Adomby adom
XHSC Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHC32F334KATI-LQFP64
XHSC · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
HC32F334KATI-LQFP64 from XHSC, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PF2 | bidirectional | GPIO on Port F with EIRQ2, EMB_PORT1_IN4, USART1_CK, TMR6_TRIGB and TMR4 alternate functions; 5 V tolerant per Table 2-4. |
| 2 | PC13 | bidirectional | GPIO on Port C with EIRQ13/WKUP3_1, RTC_OUT and TMR6/PLA alternate functions; 5 V tolerant per Table 2-4. |
| 3 | PC14/XTAL32_IN | bidirectional | Multiplexed GPIO and input of the external 32.768 kHz low-speed crystal oscillator (XTAL32_IN, 32.768 kHz per Section 3.3.6.3). |
| 4 | PC15/XTAL32_OUT | bidirectional | Multiplexed GPIO and output of the external 32.768 kHz low-speed crystal oscillator (XTAL32_OUT, 32.768 kHz per Section 3.3.6.3). |
| 5 | PF0/XTAL_IN | bidirectional | Multiplexed GPIO and input of the external high-speed crystal oscillator (XTAL_IN, 4-25 MHz per Table 3-16). |
| 6 | PF1/XTAL_OUT | bidirectional | Multiplexed GPIO and output of the external high-speed crystal oscillator (XTAL_OUT, 4-25 MHz per Table 3-16). |
| 7 | NRST | input | Reset input, active low; if unused, connect a resistor to VCC as pull-up (Table 2-6). |
| 8 | PC0 | bidirectional | GPIO on Port C with ADC12_IN10 analog input and SPI_NSS3/TMR6 alternate functions; analog input voltage must not exceed AVCC/VREFH. |
| 9 | PC1 | bidirectional | GPIO on Port C with ADC12_IN11 analog input and CMP3_OUT/SPI_NSS2 alternate functions; analog input voltage must not exceed AVCC/VREFH. |
| 10 | PC2 | bidirectional | GPIO on Port C with ADC12_IN12 analog input and SPI_NSS1/TMR6 alternate functions; analog input voltage must not exceed AVCC/VREFH. |
| 11 | PC3 | bidirectional | GPIO on Port C with ADC12_IN13 analog input and EMB/PLA alternate functions; analog input voltage must not exceed AVCC/VREFH. |
| 12 | AVSS/VREFL | power_in | Analog ground; must be shorted to VSS when the analog modules are not used (Table 2-6), and also serves as the analog reference low (VREFL). |
| 13 | AVCC/VREFH | power_in | Analog supply, 1.8-3.63 V, equal to VCC; must be shorted to VCC when analog modules are not used (Table 2-6), and also serves as the analog reference high (VREFH). |
| 14 | PA0 | bidirectional | GPIO on Port A with ADC1_IN0 analog input, EIRQ0/WKUP0_0 and CMP1_OUT alternate functions; 5 V tolerant per Table 2-4. |
| 15 | PA1 | bidirectional | GPIO on Port A with ADC1_IN1 analog input, RTC_CLK1 and EIRQ1 alternate functions; 5 V tolerant per Table 2-4. |
| 16 | PA2 | bidirectional | GPIO on Port A with ADC1_IN2 and CMP1_INM2 analog inputs, EIRQ2 and CMP1_OUT/CMP2_OUT alternate functions; 5 V tolerant per Table 2-4. |
| 17 | PA3 | bidirectional | GPIO on Port A with ADC1_IN3, CMP1_INP2, CMP2_INP2 and CMP3_INP2 analog inputs, and EIRQ3 alternate function; 5 V tolerant per Table 2-4. |
| 18 | VSS | power_in | Digital ground, 0 V. |
| 19 | VCC | power_in | Digital supply, 1.8-3.63 V; decouple to VSS with capacitors close to the pin (Section 2.4 and Figure 3-2). |
| 20 | PA4 | bidirectional | GPIO on Port A with ADC12_IN4, DAC1_OUT1 and CMP1/2/3_INM1 analog inputs, USART1_CK and USART2_CK alternate functions; 5 V tolerant per Table 2-4. |
| 21 | PA5 | bidirectional | GPIO on Port A with ADC12_IN5 and DAC1_OUT2 analog functions and EIRQ5 alternate function; 5 V tolerant per Table 2-4. |
| 22 | PA6 | bidirectional | GPIO on Port A with ADC123_IN6 and DAC2_OUT1 analog functions, EIRQ6 and CMP1_OUT/EMB alternate functions; 5 V tolerant per Table 2-4. |
| 23 | PA7 | bidirectional | GPIO on Port A with ADC123_IN7 and CMP1_INP1 analog inputs, EIRQ7 and ADTRG3 alternate functions; 5 V tolerant per Table 2-4. |
| 24 | PC4 | bidirectional | GPIO on Port C with ADC12_IN14 analog input and EIRQ4 alternate function; 5 V tolerant per Table 2-4. |
| 25 | PC5 | bidirectional | GPIO on Port C with ADC12_IN15 analog input and EIRQ5/EMB alternate functions; 5 V tolerant per Table 2-4. |
| 26 | PB0 | bidirectional | GPIO on Port B with ADC123_IN8 and CMP2_INP1 analog inputs, EIRQ0 and ADTRG1 alternate functions; 5 V tolerant per Table 2-4. |
| 27 | PB1 | bidirectional | GPIO on Port B with ADC123_IN9 analog input, EIRQ1/WKUP0_1 and ADTRG2 alternate functions; 5 V tolerant per Table 2-4. |
| 28 | PB2 | bidirectional | GPIO on Port B with ADC3_IN10 and CMP2_INM2 analog inputs, EIRQ2/WKUP0_2 and ADTRG3 alternate functions; 5 V tolerant per Table 2-4. |
| 29 | PB10 | bidirectional | GPIO on Port B with ADC3_IN11 analog input, EIRQ10 and HRPWM_EEV9 alternate functions; 5 V tolerant per Table 2-4. |
| 30 | PB11 | bidirectional | GPIO on Port B with CMP3_INP1 analog input, EIRQ11 and HRPWM_EEV7 alternate functions; 5 V tolerant per Table 2-4. |
| 31 | VSS | power_in | Digital ground, 0 V. |
| 32 | VCC | power_in | Digital supply, 1.8-3.63 V; decouple to VSS with capacitors close to the pin (Section 2.4 and Figure 3-2). |
| 33 | PB12 | bidirectional | GPIO on Port B with ADC3_IN0 analog input, EIRQ12 and USART1_CK/USART3_CK alternate functions; 5 V tolerant per Table 2-4. |
| 34 | PB13 | bidirectional | GPIO on Port B with ADC3_IN1 analog input, EIRQ13 and HRPWM_4_PWMB alternate functions; 5 V tolerant per Table 2-4. |
| 35 | PB14 | bidirectional | GPIO on Port B with ADC3_IN2 analog input, EIRQ14 and HRPWM_5_PWMA alternate functions; 5 V tolerant per Table 2-4. |
| 36 | PB15 | bidirectional | GPIO on Port B with ADC3_IN3 and CMP3_INM2 analog inputs, RTC_CLK2, EIRQ15 and CMP1_OUT alternate functions; 5 V tolerant per Table 2-4. |
| 37 | PC6 | bidirectional | GPIO on Port C with EIRQ6, HRPWM_1_PWMA and CMP3_OUT alternate functions; 5 V tolerant per Table 2-4. |
| 38 | PC7 | bidirectional | GPIO on Port C with EIRQ7, HRPWM_1_PWMB and EMB_PORT1_IN5 alternate functions; 5 V tolerant per Table 2-4. |
| 39 | PC8 | bidirectional | GPIO on Port C with EIRQ8, HRPWM_6_PWMA and MCO_2 alternate functions; 5 V tolerant per Table 2-4. |
| 40 | PC9 | bidirectional | GPIO on Port C with EIRQ9, HRPWM_6_PWMB and MCO_1 alternate functions; 5 V tolerant per Table 2-4. |
| 41 | PA8 | bidirectional | GPIO on Port A with EXVREF, EIRQ8/WKUP2_0, TRACED0 and USART2_CK/USART1_CK alternate functions; 5 V tolerant per Table 2-4. |
| 42 | PA9 | bidirectional | GPIO on Port A with EIRQ9, TRACECLK and HRPWM_2_PWMB alternate functions; 5 V tolerant per Table 2-4. |
| 43 | PA10 | bidirectional | GPIO on Port A with EIRQ10/WKUP2_2, TRACED1 and CMP3_OUT alternate functions; 5 V tolerant per Table 2-4. |
| 44 | PA11 | bidirectional | GPIO on Port A with EIRQ11/WKUP2_3, TRACED2 and CMP1_OUT alternate functions; 5 V tolerant per Table 2-4. |
| 45 | PA12 | bidirectional | GPIO on Port A with EIRQ12/WKUP3_0, TRACED3, CMP2_OUT and SPI_NSS1 alternate functions; 5 V tolerant per Table 2-4. |
| 46 | PA13 | bidirectional | GPIO on Port A with EIRQ13 and JTMS_SWDIO (serial wire debug data) alternate functions; 5 V tolerant per Table 2-4. |
| 47 | VSS | power_in | Digital ground, 0 V. |
| 48 | VCC | power_in | Digital supply, 1.8-3.63 V; decouple to VSS with capacitors close to the pin (Section 2.4 and Figure 3-2). |
| 49 | PA14 | bidirectional | GPIO on Port A with EIRQ14/WKUP3_2 and JTCK_SWCLK (serial wire debug clock) alternate functions; 5 V tolerant per Table 2-4. |
| 50 | PA15 | bidirectional | GPIO on Port A with EIRQ15/WKUP3_3 and JTDI alternate functions; 5 V tolerant per Table 2-4. |
| 51 | PC10 | bidirectional | GPIO on Port C with EIRQ10 and PLA/TMR6 alternate functions; 5 V tolerant per Table 2-4. |
| 52 | PC11 | bidirectional | GPIO on Port C with EIRQ11, HRPWM_EEV2 and TMR4 alternate functions; 5 V tolerant per Table 2-4. |
| 53 | PC12 | bidirectional | GPIO on Port C with EIRQ12, HRPWM_EEV1 and USART1_CK/USART3_CK alternate functions; 5 V tolerant per Table 2-4. |
| 54 | PD2 | bidirectional | GPIO on Port D with EIRQ2, CMP3_OUT and HRPWM/TMR6 alternate functions; 5 V tolerant per Table 2-4. |
| 55 | PB3 | bidirectional | GPIO on Port B with EIRQ3/WKUP0_3, JTDO_TRACESWO and HRPWM_EEV9 alternate functions; 5 V tolerant per Table 2-4. |
| 56 | PB4 | bidirectional | GPIO on Port B with EIRQ4/WKUP1_0, NJTRST and HRPWM_EEV7 alternate functions; 5 V tolerant per Table 2-4. |
| 57 | PB5 | bidirectional | GPIO on Port B with EIRQ5/WKUP1_1, HRPWM_EEV6 and USART1_CK/USART2_CK alternate functions; 5 V tolerant per Table 2-4. |
| 58 | PB6 | bidirectional | GPIO on Port B with EIRQ6/WKUP1_2, SPI_NSS2, HRPWM_EEV4 and CTCREF/CMP1_OUT alternate functions; 5 V tolerant per Table 2-4. |
| 59 | PB7 | bidirectional | GPIO on Port B with EIRQ7/WKUP1_3, EMB_PORT1_IN1, HRPWM_EEV3 and FCMREF/CMP2_OUT alternate functions; 5 V tolerant per Table 2-4. |
| 60 | PF3/MD | bidirectional | Mode input shared with GPIO PF3; it must be held low when NRST is released and a 4.7 kΩ pull-down to VSS is recommended (Table 2-6). |
| 61 | PB8 | bidirectional | GPIO on Port B with PVD2EXINP (external PVD2 comparison voltage input), EIRQ8, SPI_NSS3 and EMB alternate functions; 5 V tolerant per Table 2-4. |
| 62 | PB9 | bidirectional | GPIO on Port B with EIRQ9/WKUP2_1, CMP2_OUT and CMP1_OUT alternate functions; 5 V tolerant per Table 2-4. |
| 63 | VSS | power_in | Digital ground, 0 V. |
| 64 | VCC | power_in | Digital supply, 1.8-3.63 V; decouple to VSS with capacitors close to the pin (Section 2.4 and Figure 3-2). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XHSC |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 从HRPWMEEVy输入到HRPWM__PWMA/B输出端口的迟延(数字外部事件响应时间) | TLAT(DEEV) | 60 | 70 | ns | 从HRPWMEEVy输入到HRPWM__PWMA/B输出端口的迟延(30pF负载) | 67 | |
| 最小外部事件脉冲宽度 | TW(EEV) | 12.5 | ns | 67 | |||
| 模拟外部事件响应时间 | TLAT(AEEV) | 75 | 85 | ns | 从CMPy_INPz输入到HRPWM__PWMA/B输出端口的迟延(30pF负载) | 67 | |
| 外部事件反应jitter | TJIT (EEV) | 1 | tPCLK0 | 从HRPWM_EEVy输入到HRPWM__PWMA/B输出端口的jitter | 67 | ||
| 同步输入信号HRPWM_TRGA~D最小脉宽 | Tw(TRGA-D) | 2 | tPCLK0 | 67 | |||
| 同步请求响应时间 | TRES(TRGA-D) | 4 | tPCLK0 | 67 | |||
| 同步输出信号HRPWM_SYNCOUT最小脉宽 | Tw(SYNCOUT) | 16 | 65535 | tPCLK0 | 67 | ||
| SCL频率 | fSCL | 0 | 100 | KHz | 标准模式(SM) | 68 | |
| SCL频率 | fSCL | 0 | 400 | KHz | 快速模式(FM) | 68 | |
| SCL频率 | fSCL | 0 | 1000 | KHz | 快速模式Plus(FM+) | 68 | |
| 开始条件/重新开始条件Hold | tHD;STA | 4 | μs | 标准模式(SM) | 68 | ||
| 开始条件/重新开始条件Hold | tHD;STA | 0.6 | μs | 快速模式(FM) | 68 | ||
| 开始条件/重新开始条件Hold | tHD;STA | 0.26 | μs | 快速模式Plus(FM+) | 68 | ||
| SCL低电平 | tLOW | 4.7 | μs | 标准模式(SM) | 68 | ||
| SCL低电平 | tLOW | 1.3 | μs | 快速模式(FM) | 68 | ||
| SCL低电平 | tLOW | 0.5 | μs | 快速模式Plus(FM+) | 68 | ||
| SCL高电平 | tHIGH | 4 | μs | 标准模式(SM) | 68 | ||
| SCL高电平 | tHIGH | 0.6 | μs | 快速模式(FM) | 68 | ||
| SCL高电平 | tHIGH | 0.26 | μs | 快速模式Plus(FM+) | 68 | ||
| 重新开始条件Setup | tSU;STA | 4.7 | μs | 标准模式(SM) | 68 | ||
| 重新开始条件Setup | tSU;STA | 0.6 | μs | 快速模式(FM) | 68 | ||
| 重新开始条件Setup | tSU;STA | 0.26 | μs | 快速模式Plus(FM+) | 68 | ||
| 数据Hold | tHD;DAT | 0 | μs | 标准模式(SM) | 68 | ||
| SCL/SDA的上升时间 | tR | 1000 | ns | 标准模式(SM) | 68 | ||
| SCL/SDA的上升时间 | tR | 300 | ns | 快速模式(FM) | 68 | ||
| SCL/SDA的上升时间 | tR | 120 | ns | 快速模式Plus(FM+) | 68 | ||
| SCL/SDA的下降时间 | tF | 300 | ns | 标准模式(SM) | 68 | ||
| SCL/SDA的下降时间 | tF | 120 | ns | 快速模式Plus(FM+) | 68 | ||
| 停止条件Setup | tSU;STO | 4 | μs | 标准模式(SM) | 68 | ||
| 停止条件Setup | tSU;STO | 0.6 | μs | 快速模式(FM) | 68 | ||
| 停止条件Setup | tSU;STO | 0.26 | μs | 快速模式Plus(FM+) | 68 | ||
| 停止条件到开始条件间的BUS空闲时间 | tBUF | 4.7 | μs | 标准模式(SM) | 68 | ||
| 停止条件到开始条件间的BUS空闲时间 | tBUF | 1.3 | μs | 快速模式(FM) | 68 | ||
| 停止条件到开始条件间的BUS空闲时间 | tBUF | 0.5 | μs | 快速模式Plus(FM+) | 68 | ||
| 负载电容 | Cb | 400 | pF | 标准模式(SM) | 68 | ||
| 负载电容 | Cb | 550 | pF | 快速模式Plus(FM+) | 68 | ||
| Data输入建立时间 | tsu(SI) | 4 | ns | 从机模式,1.8V≤Vcc≤3.63V | 69 | ||
| Data输入保持时间 | th(SI) | 3 | ns | 从机模式,1.8V≤Vcc≤3.63V | 69 | ||
| Data输出有效时间 | tv(SO) | 15 | ns | 从机模式,2.7V≤Vcc≤3.63V | 69 | ||
| Data输出有效时间 | tv(SO) | 26 | ns | 从机模式,1.8V≤Vcc<2.7V | 69 | ||
| Data输入建立时间 | tsu(MI) | 5 | ns | 主机模式,2.7V≤Vcc≤3.63V | 69 | ||
| Data输入建立时间 | tsu(MI) | 9 | ns | 主机模式,1.8V≤Vcc<2.7V | 69 | ||
| Data输入保持时间 | th(MI) | 5 | ns | 主机模式,2.7V≤Vcc≤3.63V | 69 | ||
| Data输入保持时间 | th(MI) | 15 | ns | 主机模式,1.8V≤Vcc≤2.7V | 69 | ||
| Data输出有效时间 | tv(MO) | 4 | ns | 主机模式,2.7V≤Vcc≤3.63V | 69 | ||
| Data输出有效时间 | tv(MO) | 9 | ns | 主机模式,1.8V≤Vcc≤2.7V | 69 |
CAD (KiCad official)
- Symbol:
HC32F334KATI-LQFP64 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
hc32f334kati-lqfp64-etched.step/hc32f334kati-lqfp64-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc32f334kati-lqfp64.step/hc32f334kati-lqfp64.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XHSC datasheet (102 pp, sha256
bf3aa4841b430601, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).