main
Ray
Publish 0.1.0
ed5ef3b
HC32F030K8TA-LQFP64
HDSC · HDSC · LQFP-64(10x10)
HC32F030K8TA-LQFP64 from HDSC, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCAP | power_out | LDO core-supply output for internal circuits only; an external decoupling capacitor of not less than 1 µF is required. |
| 2 | PC13 | bidirectional | GPIO PC13 with alternate functions TIM3_CH1B (PSEL table) and LVD_IN0 (LVD voltage-detection input 0). |
| 3 | XTLI/PC14 | passive | Low-speed crystal oscillator input (XTL, 32.768 kHz) shared with GPIO PC14; the load capacitance must follow the crystal manufacturer's specification. |
| 4 | XTLO/PC15 | passive | Low-speed crystal oscillator output (XTL, 32.768 kHz) shared with GPIO PC15; the load capacitance must follow the crystal manufacturer's specification. |
| 5 | PD00 | passive | High-speed crystal oscillator input (XTH, 4-32 MHz) shared with GPIO PD00, which also carries I2C0_SDA and UART1_TXD. |
| 6 | PD01 | passive | High-speed crystal oscillator output (XTH, 4-32 MHz) shared with GPIO PD01, which also carries I2C0_SCL, TIM4_CHB and UART1_RXD. |
| 7 | RESETB | input | Active-low reset input in CMOS with a non-disconnectable pull-up (about 80 kΩ), input filter pulse 100 ns and non-filter pulse 300 ns, VIH 0.7VCC to VCC+0.3 V, VIL -0.3 to 0.3VCC. |
| 8 | PC00 | bidirectional | GPIO PC00 with alternate functions UART1_CTS, analog input AIN10, and comparator inputs VC0_INP0 and VC1_INN0. |
| 9 | PC01 | bidirectional | GPIO PC01 with alternate functions TIM5_CHB and UART1_RTS, analog input AIN11, and comparator inputs VC0_INP1 and VC1_INN1. |
| 10 | PC02 | bidirectional | GPIO PC02 with alternate function SPI1_MISO, analog input AIN12, and comparator inputs VC0_INP2 and VC1_INN2. |
| 11 | PC03 | bidirectional | GPIO PC03 with alternate function SPI1_MOSI, analog input AIN13, and comparator inputs VC0_INP3 and VC1_INN3. |
| 12 | AVSS | power_in | Analog ground (模拟地); all voltages in the datasheet are referenced to VSS. |
| 13 | AVCC | power_in | Analog supply, 1.8-5.5 V, which must be the same voltage as DVCC, with at most 300 mV difference between DVCC and AVCC during power-up and operation. |
| 14 | PA00 | bidirectional | GPIO PA00 with digital alternate functions UART1_CTS, TIM0_ETR, VC0_OUT, TIM1_CHA, TIM3_ETR, TIM0_CHA, and analog input AIN0 with comparator inputs VC0_INP4, VC0_INN0, VC1_INP0, VC1_INN4. |
| 15 | PA01 | bidirectional | GPIO PA01 with digital alternate functions UART1_RTS, TIM0_CHB, TIM1_ETR, TIM1_CHB, HCLK_OUT, SPI1_MOSI, and analog input AIN1 with comparator inputs VC0_INP5, VC0_INN1, VC1_INP1, VC1_INN5. |
| 16 | PA02 | bidirectional | GPIO PA02 with digital alternate functions UART1_TXD, TIM0_CHA, VC1_OUT, TIM1_CHA, TIM2_CHA, PCLK_OUT, SPI1_MISO, and analog input AIN2 with comparator inputs VC0_INP6, VC0_INN2, VC1_INP2. |
| 17 | PA03 | bidirectional | GPIO PA03 with digital alternate functions UART1_RXD, TIM0_GATE, TIM1_CHB, TIM2_CHB, SPI1_CS, TIM3_CH1A and TIM5_CHA. |
| 18 | PD04 | bidirectional | GPIO PD04; the datasheet's PSEL alternate-function table lists no function for this pin. |
| 19 | PD05 | bidirectional | GPIO PD05; the datasheet's PSEL alternate-function table lists no function for this pin. |
| 20 | PA04 | bidirectional | GPIO PA04 with digital alternate functions SPI0_CS, UART1_TXD, PCA_CH4, TIM2_ETR, TIM5_CHA, LVD_OUT and TIM3_CH2B. |
| 21 | PA05 | bidirectional | GPIO PA05 with digital alternate functions SPI0_SCK, TIM0_ETR, PCA_ECI, TIM0_CHA, TIM5_CHB, XTL_OUT and XTH_OUT. |
| 22 | PA06 | bidirectional | GPIO PA06 with digital alternate functions SPI0_MISO, PCA_CH0, TIM3_BK, TIM1_CHA, VC0_OUT and TIM3_GATE. |
| 23 | PA07 | bidirectional | GPIO PA07 with digital alternate functions SPI0_MOSI, PCA_CH1, HCLK_OUT, TIM3_CH0B, TIM2_CHA, VC1_OUT and TIM4_CHB. |
| 24 | PC04 | bidirectional | GPIO PC04 with digital alternate functions TIM2_ETR and IR_OUT. |
| 25 | PC05 | bidirectional | GPIO PC05 with digital alternate functions TIM6_CHB and PCA_CH4. |
| 26 | PB00 | bidirectional | GPIO PB00 with digital alternate functions PCA_CH2, TIM3_CH1B, TIM5_CHB, RCH_OUT, RCL_OUT and PLL_OUT. |
| 27 | PB01 | bidirectional | GPIO PB01 with digital alternate functions PCA_CH3, PCLK_OUT, TIM3_CH2B and TIM6_CHB. |
| 28 | PB02 | bidirectional | GPIO PB02 with digital alternate functions PCA_ECI, TIM4_CHA, TIM1_BK, TIM0_BK and TIM2_BK. |
| 29 | PB10 | bidirectional | GPIO PB10 with digital alternate functions I2C1_SCL, SPI1_SCK, TIM1_CHA, TIM3_CH1A and UART1_RTS. |
| 30 | PB11 | bidirectional | GPIO PB11 with digital alternate functions I2C1_SDA, TIM1_CHB, TIM2_GATE, TIM6_CHA and UART1_CTS. |
| 31 | DVSS | power_in | Digital ground (数字地). |
| 32 | DVCC | power_in | Digital supply, 1.8-5.5 V (DVCC), which must be the same voltage as AVCC. |
| 33 | PB12 | bidirectional | GPIO PB12 with digital alternate functions SPI1_CS, TIM3_BK, TIM0_BK and TIM6_CHA. |
| 34 | PB13 | bidirectional | GPIO PB13 with digital alternate functions SPI1_SCK, I2C1_SCL, TIM3_CH0B, TIM1_CHA, TIM1_GATE and TIM6_CHB. |
| 35 | PB14 | bidirectional | GPIO PB14 with digital alternate functions SPI1_MISO, I2C1_SDA, TIM3_CH1B, TIM0_CHA and TIM1_BK. |
| 36 | PB15 | bidirectional | GPIO PB15 with digital alternate functions SPI1_MOSI, TIM3_CH2B, TIM0_CHB and TIM0_GATE. |
| 37 | PC06 | bidirectional | GPIO PC06 with digital alternate functions PCA_CH0, TIM4_CHA and TIM2_CHA. |
| 38 | PC07 | bidirectional | GPIO PC07 with digital alternate functions PCA_CH1, TIM5_CHA and TIM2_CHB. |
| 39 | PC08 | bidirectional | GPIO PC08 with digital alternate functions PCA_CH2, TIM6_CHA and TIM2_ETR. |
| 40 | PC09 | bidirectional | GPIO PC09 with digital alternate functions PCA_CH3, TIM4_CHB and TIM1_ETR. |
| 41 | PA08 | bidirectional | GPIO PA08 with digital alternate functions UART0_TXD, TIM3_CH0A, TIM1_GATE, TIM4_CHA and TIM3_BK. |
| 42 | PA09 | bidirectional | GPIO PA09 with digital alternate functions UART0_TXD, TIM3_CH1A, TIM0_BK, I2C0_SCL, HCLK_OUT and TIM5_CHA; PA09 is a recommended ISP programming pin. |
| 43 | PA10 | bidirectional | GPIO PA10 with digital alternate functions UART0_RXD, TIM3_CH2A, TIM2_BK, I2C0_SDA, TIM2_GATE, PCLK_OUT and TIM6_CHA; PA10 is a recommended ISP programming pin. |
| 44 | PA11 | bidirectional | GPIO PA11 with digital alternate functions UART0_CTS, TIM3_GATE, I2C1_SCL, VC0_OUT, SPI0_MISO and TIM4_CHB. |
| 45 | PA12 | bidirectional | GPIO PA12 with digital alternate functions UART0_RTS, TIM3_ETR, I2C1_SDA, VC1_OUT and SPI0_MOSI. |
| 46 | PA13/SWDIO | bidirectional | SWD debug data I/O (SWDIO) shared with GPIO PA13, which also carries IR_OUT, UART0_RXD, LVD_OUT and TIM3_ETR; PA13 and PA14 are the SWD programming interface. |
| 47 | PD06 | bidirectional | GPIO PD06 with digital alternate functions I2C1_SCL and UART0_CTS. |
| 48 | PD07 | bidirectional | GPIO PD07 with digital alternate functions I2C1_SDA and UART0_RTS. |
| 49 | PA14/SWCLK | bidirectional | SWD debug clock (SWCLK) shared with GPIO PA14, which also carries UART1_TXD, UART0_TXD, TIM3_CH2A, LVD_OUT, RCH_OUT, RCL_OUT and PLL_OUT; PA13 and PA14 are the SWD programming interface. |
| 50 | PA15 | bidirectional | GPIO PA15 with digital alternate functions SPI0_CS, UART1_RXD, TIM0_ETR, TIM0_CHA and TIM3_CH1A. |
| 51 | PC10 | bidirectional | GPIO PC10 with digital alternate function PCA_CH2. |
| 52 | PC11 | bidirectional | GPIO PC11 with digital alternate function PCA_CH3. |
| 53 | PC12 | bidirectional | GPIO PC12 with digital alternate function PCA_CH4. |
| 54 | PD02 | bidirectional | GPIO PD02 with digital alternate functions PCA_ECI and TIM1_ETR. |
| 55 | PB03 | bidirectional | GPIO PB03 with digital alternate functions SPI0_SCK, TIM0_CHB, TIM1_GATE, TIM3_CH0A, XTL_OUT and XTH_OUT. |
| 56 | PB04 | bidirectional | GPIO PB04 with digital alternate functions SPI0_MISO, PCA_CH0, TIM2_BK, UART0_CTS, TIM2_GATE and TIM3_CH0B. |
| 57 | PB05 | bidirectional | GPIO PB05 with digital alternate functions SPI0_MOSI, TIM1_BK, PCA_CH1 and UART0_RTS. |
| 58 | PB06 | bidirectional | GPIO PB06 with digital alternate functions I2C0_SCL, UART0_TXD, TIM1_CHB, TIM0_CHA and TIM3_CH0A. |
| 59 | PB07 | bidirectional | GPIO PB07 with digital alternate functions I2C0_SDA, UART0_RXD, TIM2_CHB and TIM0_CHB; PB07 is also an LVD monitoring source. |
| 60 | BOOT0 | input | Boot mode pin sampled at reset: high selects ISP programming mode, low selects user mode executing Flash code with SWD programming access. |
| 61 | PB08 | bidirectional | GPIO PB08 with digital alternate functions I2C0_SCL, TIM1_CHA, TIM2_CHA, TIM0_GATE, TIM3_CH2A and UART0_TXD. |
| 62 | PB09 | bidirectional | GPIO PB09 with digital alternate functions I2C0_SDA, IR_OUT, SPI1_CS, TIM2_CHA, TIM2_CHB and UART0_RXD. |
| 63 | DVSS | power_in | Digital ground (数字地). |
| 64 | DVCC | power_in | Digital supply, 1.8-5.5 V (DVCC), which must be the same voltage as AVCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HDSC |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC-VSS (external main supply, incl. AVCC and DVCC) | VCC - VSS | -0.3 | 5.5 | V | 38 | ||
| Voltage difference between different supply pins | /ΔVCCx/ | 50 | mV | 38 | |||
| Voltage difference between different ground pins | /VSSx - VSS/ | 50 | mV | 38 | |||
| Total current through DVCC/AVCC supply lines | IVCC | 300 | mA | 39 | |||
| Total current through VSS ground lines | IVSS | 300 | mA | 39 | |||
| Output sink current, any I/O and control pin | IIO | 25 | mA | 39 | |||
| Output current, any I/O and control pin | IIO | -25 | mA | 39 | |||
| Injection current, RESETB pin | IINJ(PIN) | -5 | 5 | mA | 39 | ||
| Injection current, XTHI pin and XTLI pin | IINJ(PIN) | -5 | 5 | mA | 39 | ||
| Injection current, other pins | IINJ(PIN) | -5 | 5 | mA | 39 | ||
| Total injection current, all I/O and control pins | ΣIINJ(PIN) | -25 | 25 | mA | 39 | ||
| Storage temperature range | TSTG | -60 | 150 | ℃ | 39 | ||
| Maximum junction temperature | TJ | 105 | ℃ | 39 | |||
| Internal AHB clock frequency | fHCLK | 0 | 48 | MHz | 39 | ||
| Internal APB0 clock frequency | fPCLK0 | 0 | 48 | MHz | 39 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 48 | MHz | 39 | ||
| Digital supply operating voltage | DVCC | 1.8 | 5.5 | V | 39 | ||
| Analog supply operating voltage | AVCC | 1.8 | 5.5 | V | 必须与DVCC相同 | 39 | |
| Power dissipation, LQFP64 package | PD | 455 | mW | TA=85℃ | 39 | ||
| Ambient temperature, maximum power consumption | TA | -40 | 85 | ℃ | 最大功率消耗 | 40 | |
| Ambient temperature, low power consumption | TA | -40 | 105 | ℃ | 低功率消耗 | 40 | |
| Junction temperature range | TJ | -40 | 105 | ℃ | 40 | ||
| VCC rising slew rate | tVcc | 0 | μs/V | 40 | |||
| VCC falling slew rate | tVcc | 10 | μs/V | 40 | |||
| POR release voltage (power-up) / BOR detection voltage (power-down) | Vpor | 1.45 | 1.5 | 1.65 | V | 40 | |
| LVD detection threshold, LVD_CR.VTDS=0000 | Vlevel | 1.7 | 1.8 | 1.9 | V | LVD_CR.VTDS=0000 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0001 | Vlevel | 1.8 | 1.9 | 2 | V | LVD_CR.VTDS=0001 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0010 | Vlevel | 1.9 | 2 | 2.1 | V | LVD_CR.VTDS=0010 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0011 | Vlevel | 2 | 2.1 | 2.2 | V | LVD_CR.VTDS=0011 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0100 | Vlevel | 2.1 | 2.2 | 2.3 | V | LVD_CR.VTDS=0100 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0101 | Vlevel | 2.2 | 2.3 | 2.4 | V | LVD_CR.VTDS=0101 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0110 | Vlevel | 2.3 | 2.4 | 2.5 | V | LVD_CR.VTDS=0110 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0111 | Vlevel | 2.4 | 2.5 | 2.6 | V | LVD_CR.VTDS=0111 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1000 | Vlevel | 2.5 | 2.6 | 2.7 | V | LVD_CR.VTDS=1000 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1001 | Vlevel | 2.6 | 2.7 | 2.8 | V | LVD_CR.VTDS=1001 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1010 | Vlevel | 2.7 | 2.8 | 2.9 | V | LVD_CR.VTDS=1010 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1011 | Vlevel | 2.8 | 2.9 | 3 | V | LVD_CR.VTDS=1011 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1100 | Vlevel | 2.9 | 3 | 3.1 | V | LVD_CR.VTDS=1100 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1101 | Vlevel | 3 | 3.1 | 3.2 | V | LVD_CR.VTDS=1101 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1110 | Vlevel | 3.1 | 3.2 | 3.3 | V | LVD_CR.VTDS=1110 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1111 | Vlevel | 3.2 | 3.3 | 3.4 | V | LVD_CR.VTDS=1111 | 41 |
| External input voltage range for LVD | Vex | 0 | V | 41 | |||
| Internal 2.5V reference voltage, 25°C | VREF25 | 2.475 | 2.5 | 2.525 | V | 常温25°C 3.3V | 41 |
| Internal 2.5V reference voltage, -40~85°C | VREF25 | 2.463 | 2.5 | 2.525 | V | -40 |
41 |
| Internal 1.5V reference voltage, 25°C | VREF15 | 1.485 | 1.5 | 1.515 | V | 常温25°C 3.3V | 41 |
| Internal 1.5V reference voltage, -40~85°C | VREF15 | 1.477 | 1.5 | 1.519 | V | -40 |
41 |
CAD (KiCad official)
- Symbol:
HC32F030K8TA-LQFP64 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
hc32f030k8ta-lqfp64-etched.step/hc32f030k8ta-lqfp64-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc32f030k8ta-lqfp64.step/hc32f030k8ta-lqfp64.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HDSC datasheet (80 pp, sha256
c1f5c05168fa2ea7, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HC32F030K8TA-LQFP64
**HDSC** · HDSC · LQFP-64(10x10)
HC32F030K8TA-LQFP64 from HDSC, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCAP | power_out | LDO core-supply output for internal circuits only; an external decoupling capacitor of not less than 1 µF is required. |
| 2 | PC13 | bidirectional | GPIO PC13 with alternate functions TIM3_CH1B (PSEL table) and LVD_IN0 (LVD voltage-detection input 0). |
| 3 | XTLI/PC14 | passive | Low-speed crystal oscillator input (XTL, 32.768 kHz) shared with GPIO PC14; the load capacitance must follow the crystal manufacturer's specification. |
| 4 | XTLO/PC15 | passive | Low-speed crystal oscillator output (XTL, 32.768 kHz) shared with GPIO PC15; the load capacitance must follow the crystal manufacturer's specification. |
| 5 | PD00 | passive | High-speed crystal oscillator input (XTH, 4-32 MHz) shared with GPIO PD00, which also carries I2C0_SDA and UART1_TXD. |
| 6 | PD01 | passive | High-speed crystal oscillator output (XTH, 4-32 MHz) shared with GPIO PD01, which also carries I2C0_SCL, TIM4_CHB and UART1_RXD. |
| 7 | RESETB | input | Active-low reset input in CMOS with a non-disconnectable pull-up (about 80 kΩ), input filter pulse 100 ns and non-filter pulse 300 ns, VIH 0.7VCC to VCC+0.3 V, VIL -0.3 to 0.3VCC. |
| 8 | PC00 | bidirectional | GPIO PC00 with alternate functions UART1_CTS, analog input AIN10, and comparator inputs VC0_INP0 and VC1_INN0. |
| 9 | PC01 | bidirectional | GPIO PC01 with alternate functions TIM5_CHB and UART1_RTS, analog input AIN11, and comparator inputs VC0_INP1 and VC1_INN1. |
| 10 | PC02 | bidirectional | GPIO PC02 with alternate function SPI1_MISO, analog input AIN12, and comparator inputs VC0_INP2 and VC1_INN2. |
| 11 | PC03 | bidirectional | GPIO PC03 with alternate function SPI1_MOSI, analog input AIN13, and comparator inputs VC0_INP3 and VC1_INN3. |
| 12 | AVSS | power_in | Analog ground (模拟地); all voltages in the datasheet are referenced to VSS. |
| 13 | AVCC | power_in | Analog supply, 1.8-5.5 V, which must be the same voltage as DVCC, with at most 300 mV difference between DVCC and AVCC during power-up and operation. |
| 14 | PA00 | bidirectional | GPIO PA00 with digital alternate functions UART1_CTS, TIM0_ETR, VC0_OUT, TIM1_CHA, TIM3_ETR, TIM0_CHA, and analog input AIN0 with comparator inputs VC0_INP4, VC0_INN0, VC1_INP0, VC1_INN4. |
| 15 | PA01 | bidirectional | GPIO PA01 with digital alternate functions UART1_RTS, TIM0_CHB, TIM1_ETR, TIM1_CHB, HCLK_OUT, SPI1_MOSI, and analog input AIN1 with comparator inputs VC0_INP5, VC0_INN1, VC1_INP1, VC1_INN5. |
| 16 | PA02 | bidirectional | GPIO PA02 with digital alternate functions UART1_TXD, TIM0_CHA, VC1_OUT, TIM1_CHA, TIM2_CHA, PCLK_OUT, SPI1_MISO, and analog input AIN2 with comparator inputs VC0_INP6, VC0_INN2, VC1_INP2. |
| 17 | PA03 | bidirectional | GPIO PA03 with digital alternate functions UART1_RXD, TIM0_GATE, TIM1_CHB, TIM2_CHB, SPI1_CS, TIM3_CH1A and TIM5_CHA. |
| 18 | PD04 | bidirectional | GPIO PD04; the datasheet's PSEL alternate-function table lists no function for this pin. |
| 19 | PD05 | bidirectional | GPIO PD05; the datasheet's PSEL alternate-function table lists no function for this pin. |
| 20 | PA04 | bidirectional | GPIO PA04 with digital alternate functions SPI0_CS, UART1_TXD, PCA_CH4, TIM2_ETR, TIM5_CHA, LVD_OUT and TIM3_CH2B. |
| 21 | PA05 | bidirectional | GPIO PA05 with digital alternate functions SPI0_SCK, TIM0_ETR, PCA_ECI, TIM0_CHA, TIM5_CHB, XTL_OUT and XTH_OUT. |
| 22 | PA06 | bidirectional | GPIO PA06 with digital alternate functions SPI0_MISO, PCA_CH0, TIM3_BK, TIM1_CHA, VC0_OUT and TIM3_GATE. |
| 23 | PA07 | bidirectional | GPIO PA07 with digital alternate functions SPI0_MOSI, PCA_CH1, HCLK_OUT, TIM3_CH0B, TIM2_CHA, VC1_OUT and TIM4_CHB. |
| 24 | PC04 | bidirectional | GPIO PC04 with digital alternate functions TIM2_ETR and IR_OUT. |
| 25 | PC05 | bidirectional | GPIO PC05 with digital alternate functions TIM6_CHB and PCA_CH4. |
| 26 | PB00 | bidirectional | GPIO PB00 with digital alternate functions PCA_CH2, TIM3_CH1B, TIM5_CHB, RCH_OUT, RCL_OUT and PLL_OUT. |
| 27 | PB01 | bidirectional | GPIO PB01 with digital alternate functions PCA_CH3, PCLK_OUT, TIM3_CH2B and TIM6_CHB. |
| 28 | PB02 | bidirectional | GPIO PB02 with digital alternate functions PCA_ECI, TIM4_CHA, TIM1_BK, TIM0_BK and TIM2_BK. |
| 29 | PB10 | bidirectional | GPIO PB10 with digital alternate functions I2C1_SCL, SPI1_SCK, TIM1_CHA, TIM3_CH1A and UART1_RTS. |
| 30 | PB11 | bidirectional | GPIO PB11 with digital alternate functions I2C1_SDA, TIM1_CHB, TIM2_GATE, TIM6_CHA and UART1_CTS. |
| 31 | DVSS | power_in | Digital ground (数字地). |
| 32 | DVCC | power_in | Digital supply, 1.8-5.5 V (DVCC), which must be the same voltage as AVCC. |
| 33 | PB12 | bidirectional | GPIO PB12 with digital alternate functions SPI1_CS, TIM3_BK, TIM0_BK and TIM6_CHA. |
| 34 | PB13 | bidirectional | GPIO PB13 with digital alternate functions SPI1_SCK, I2C1_SCL, TIM3_CH0B, TIM1_CHA, TIM1_GATE and TIM6_CHB. |
| 35 | PB14 | bidirectional | GPIO PB14 with digital alternate functions SPI1_MISO, I2C1_SDA, TIM3_CH1B, TIM0_CHA and TIM1_BK. |
| 36 | PB15 | bidirectional | GPIO PB15 with digital alternate functions SPI1_MOSI, TIM3_CH2B, TIM0_CHB and TIM0_GATE. |
| 37 | PC06 | bidirectional | GPIO PC06 with digital alternate functions PCA_CH0, TIM4_CHA and TIM2_CHA. |
| 38 | PC07 | bidirectional | GPIO PC07 with digital alternate functions PCA_CH1, TIM5_CHA and TIM2_CHB. |
| 39 | PC08 | bidirectional | GPIO PC08 with digital alternate functions PCA_CH2, TIM6_CHA and TIM2_ETR. |
| 40 | PC09 | bidirectional | GPIO PC09 with digital alternate functions PCA_CH3, TIM4_CHB and TIM1_ETR. |
| 41 | PA08 | bidirectional | GPIO PA08 with digital alternate functions UART0_TXD, TIM3_CH0A, TIM1_GATE, TIM4_CHA and TIM3_BK. |
| 42 | PA09 | bidirectional | GPIO PA09 with digital alternate functions UART0_TXD, TIM3_CH1A, TIM0_BK, I2C0_SCL, HCLK_OUT and TIM5_CHA; PA09 is a recommended ISP programming pin. |
| 43 | PA10 | bidirectional | GPIO PA10 with digital alternate functions UART0_RXD, TIM3_CH2A, TIM2_BK, I2C0_SDA, TIM2_GATE, PCLK_OUT and TIM6_CHA; PA10 is a recommended ISP programming pin. |
| 44 | PA11 | bidirectional | GPIO PA11 with digital alternate functions UART0_CTS, TIM3_GATE, I2C1_SCL, VC0_OUT, SPI0_MISO and TIM4_CHB. |
| 45 | PA12 | bidirectional | GPIO PA12 with digital alternate functions UART0_RTS, TIM3_ETR, I2C1_SDA, VC1_OUT and SPI0_MOSI. |
| 46 | PA13/SWDIO | bidirectional | SWD debug data I/O (SWDIO) shared with GPIO PA13, which also carries IR_OUT, UART0_RXD, LVD_OUT and TIM3_ETR; PA13 and PA14 are the SWD programming interface. |
| 47 | PD06 | bidirectional | GPIO PD06 with digital alternate functions I2C1_SCL and UART0_CTS. |
| 48 | PD07 | bidirectional | GPIO PD07 with digital alternate functions I2C1_SDA and UART0_RTS. |
| 49 | PA14/SWCLK | bidirectional | SWD debug clock (SWCLK) shared with GPIO PA14, which also carries UART1_TXD, UART0_TXD, TIM3_CH2A, LVD_OUT, RCH_OUT, RCL_OUT and PLL_OUT; PA13 and PA14 are the SWD programming interface. |
| 50 | PA15 | bidirectional | GPIO PA15 with digital alternate functions SPI0_CS, UART1_RXD, TIM0_ETR, TIM0_CHA and TIM3_CH1A. |
| 51 | PC10 | bidirectional | GPIO PC10 with digital alternate function PCA_CH2. |
| 52 | PC11 | bidirectional | GPIO PC11 with digital alternate function PCA_CH3. |
| 53 | PC12 | bidirectional | GPIO PC12 with digital alternate function PCA_CH4. |
| 54 | PD02 | bidirectional | GPIO PD02 with digital alternate functions PCA_ECI and TIM1_ETR. |
| 55 | PB03 | bidirectional | GPIO PB03 with digital alternate functions SPI0_SCK, TIM0_CHB, TIM1_GATE, TIM3_CH0A, XTL_OUT and XTH_OUT. |
| 56 | PB04 | bidirectional | GPIO PB04 with digital alternate functions SPI0_MISO, PCA_CH0, TIM2_BK, UART0_CTS, TIM2_GATE and TIM3_CH0B. |
| 57 | PB05 | bidirectional | GPIO PB05 with digital alternate functions SPI0_MOSI, TIM1_BK, PCA_CH1 and UART0_RTS. |
| 58 | PB06 | bidirectional | GPIO PB06 with digital alternate functions I2C0_SCL, UART0_TXD, TIM1_CHB, TIM0_CHA and TIM3_CH0A. |
| 59 | PB07 | bidirectional | GPIO PB07 with digital alternate functions I2C0_SDA, UART0_RXD, TIM2_CHB and TIM0_CHB; PB07 is also an LVD monitoring source. |
| 60 | BOOT0 | input | Boot mode pin sampled at reset: high selects ISP programming mode, low selects user mode executing Flash code with SWD programming access. |
| 61 | PB08 | bidirectional | GPIO PB08 with digital alternate functions I2C0_SCL, TIM1_CHA, TIM2_CHA, TIM0_GATE, TIM3_CH2A and UART0_TXD. |
| 62 | PB09 | bidirectional | GPIO PB09 with digital alternate functions I2C0_SDA, IR_OUT, SPI1_CS, TIM2_CHA, TIM2_CHB and UART0_RXD. |
| 63 | DVSS | power_in | Digital ground (数字地). |
| 64 | DVCC | power_in | Digital supply, 1.8-5.5 V (DVCC), which must be the same voltage as AVCC. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HDSC |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC-VSS (external main supply, incl. AVCC and DVCC) | VCC - VSS | -0.3 | | 5.5 | V | | 38 |
| Voltage difference between different supply pins | /ΔVCCx/ | | | 50 | mV | | 38 |
| Voltage difference between different ground pins | /VSSx - VSS/ | | | 50 | mV | | 38 |
| Total current through DVCC/AVCC supply lines | IVCC | | | 300 | mA | | 39 |
| Total current through VSS ground lines | IVSS | | | 300 | mA | | 39 |
| Output sink current, any I/O and control pin | IIO | | | 25 | mA | | 39 |
| Output current, any I/O and control pin | IIO | | | -25 | mA | | 39 |
| Injection current, RESETB pin | IINJ(PIN) | -5 | | 5 | mA | | 39 |
| Injection current, XTHI pin and XTLI pin | IINJ(PIN) | -5 | | 5 | mA | | 39 |
| Injection current, other pins | IINJ(PIN) | -5 | | 5 | mA | | 39 |
| Total injection current, all I/O and control pins | ΣIINJ(PIN) | -25 | | 25 | mA | | 39 |
| Storage temperature range | TSTG | -60 | | 150 | ℃ | | 39 |
| Maximum junction temperature | TJ | | | 105 | ℃ | | 39 |
| Internal AHB clock frequency | fHCLK | 0 | | 48 | MHz | | 39 |
| Internal APB0 clock frequency | fPCLK0 | 0 | | 48 | MHz | | 39 |
| Internal APB1 clock frequency | fPCLK1 | 0 | | 48 | MHz | | 39 |
| Digital supply operating voltage | DVCC | 1.8 | | 5.5 | V | | 39 |
| Analog supply operating voltage | AVCC | 1.8 | | 5.5 | V | 必须与DVCC相同 | 39 |
| Power dissipation, LQFP64 package | PD | | | 455 | mW | TA=85℃ | 39 |
| Ambient temperature, maximum power consumption | TA | -40 | | 85 | ℃ | 最大功率消耗 | 40 |
| Ambient temperature, low power consumption | TA | -40 | | 105 | ℃ | 低功率消耗 | 40 |
| Junction temperature range | TJ | -40 | | 105 | ℃ | | 40 |
| VCC rising slew rate | tVcc | 0 | | | μs/V | | 40 |
| VCC falling slew rate | tVcc | 10 | | | μs/V | | 40 |
| POR release voltage (power-up) / BOR detection voltage (power-down) | Vpor | 1.45 | 1.5 | 1.65 | V | | 40 |
| LVD detection threshold, LVD_CR.VTDS=0000 | Vlevel | 1.7 | 1.8 | 1.9 | V | LVD_CR.VTDS=0000 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0001 | Vlevel | 1.8 | 1.9 | 2 | V | LVD_CR.VTDS=0001 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0010 | Vlevel | 1.9 | 2 | 2.1 | V | LVD_CR.VTDS=0010 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0011 | Vlevel | 2 | 2.1 | 2.2 | V | LVD_CR.VTDS=0011 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0100 | Vlevel | 2.1 | 2.2 | 2.3 | V | LVD_CR.VTDS=0100 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0101 | Vlevel | 2.2 | 2.3 | 2.4 | V | LVD_CR.VTDS=0101 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0110 | Vlevel | 2.3 | 2.4 | 2.5 | V | LVD_CR.VTDS=0110 | 41 |
| LVD detection threshold, LVD_CR.VTDS=0111 | Vlevel | 2.4 | 2.5 | 2.6 | V | LVD_CR.VTDS=0111 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1000 | Vlevel | 2.5 | 2.6 | 2.7 | V | LVD_CR.VTDS=1000 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1001 | Vlevel | 2.6 | 2.7 | 2.8 | V | LVD_CR.VTDS=1001 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1010 | Vlevel | 2.7 | 2.8 | 2.9 | V | LVD_CR.VTDS=1010 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1011 | Vlevel | 2.8 | 2.9 | 3 | V | LVD_CR.VTDS=1011 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1100 | Vlevel | 2.9 | 3 | 3.1 | V | LVD_CR.VTDS=1100 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1101 | Vlevel | 3 | 3.1 | 3.2 | V | LVD_CR.VTDS=1101 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1110 | Vlevel | 3.1 | 3.2 | 3.3 | V | LVD_CR.VTDS=1110 | 41 |
| LVD detection threshold, LVD_CR.VTDS=1111 | Vlevel | 3.2 | 3.3 | 3.4 | V | LVD_CR.VTDS=1111 | 41 |
| External input voltage range for LVD | Vex | 0 | | | V | | 41 |
| Internal 2.5V reference voltage, 25°C | VREF25 | 2.475 | 2.5 | 2.525 | V | 常温25°C 3.3V | 41 |
| Internal 2.5V reference voltage, -40~85°C | VREF25 | 2.463 | 2.5 | 2.525 | V | -40~85°C 2.8~5.5V | 41 |
| Internal 1.5V reference voltage, 25°C | VREF15 | 1.485 | 1.5 | 1.515 | V | 常温25°C 3.3V | 41 |
| Internal 1.5V reference voltage, -40~85°C | VREF15 | 1.477 | 1.5 | 1.519 | V | -40~85°C 1.8~5.5V | 41 |
## CAD (KiCad official)
- Symbol: `HC32F030K8TA-LQFP64`
- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`
- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `hc32f030k8ta-lqfp64-etched.step` / `hc32f030k8ta-lqfp64-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hc32f030k8ta-lqfp64.step` / `hc32f030k8ta-lqfp64.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HDSC datasheet](docs/hc32f030k8ta-lqfp64-datasheet.pdf) (80 pp, sha256 `c1f5c05168fa2ea7`, retrieved 2026-11-13, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hc32f030k8ta-lqfp64-datasheet.pdf)