main
Ray
Publish 0.1.0
fa5ddb1
HC-XH-2AWD-K
HCTL · Wire To Board Connector · JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal
HC-XH-2AWD-K from HCTL, in a JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal |
| Category | Connectors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient operating temperature range | -25 | 85 | °C | Ambient temperature range | 3 | ||
| Rated voltage | 250 | V | AC/DC rated voltage | 5 | |||
| Rated current | 3 | A | AC/DC rated current | 5 | |||
| Contact resistance (initial) | 20 | mΩ | Mate connector; max 20 mV and max 100 mA applied; excludes wire resistance | 5 | |||
| Insulation resistance (initial) | 1000 | MΩ | 500 V DC for 1 min between adjacent contacts | 5 | |||
| Withstand voltage leakage current | 0.5 | mA | 1000 V AC(rms) for 1 min between adjacent terminals and ground of mated connectors | 5 | |||
| Current discontinuity during vibration | 1 | µs | Vibration test 7.7 on mated connectors soldered to PCB | 7 | |||
| Contact resistance after vibration | 20 | mΩ | After vibration test 7.7 | 7 | |||
| Contact resistance after durability | 20 | mΩ | After 30 mating/unmating cycles at max 10 cycles per minute, before environmental test | 7 | |||
| Temperature rise at maximum rated current | 30 | °C | Mated connector with maximum rated current passed | 8 | |||
| Contact resistance after thermal aging | 20 | mΩ | Thermal aging at 85±2°C for 96 h | 8 | |||
| Contact resistance after humidity and thermal shock | 20 | mΩ | After constant humidity (90-95% RH, 96 h) and thermal shock tests, as printed on page 9 | 9 | |||
| Insulation resistance after humidity and thermal shock | 1000 | MΩ | After constant humidity and thermal shock tests, as printed on page 9 | 9 | |||
| Contact resistance after salt spray | 20 | mΩ | Salt spray at 35±3°C, 5±1% solution, 24 h | 10 | |||
| Reflow soldering time | 20 | s | Reflow soldering at 255±5°C | 12 | |||
| Storage temperature (packaged) | -20 | 40 | °C | Packaged connectors stored in warehouse air | 14 | ||
| Storage relative humidity (packaged) | 80 | % | Packaged connectors stored in warehouse air, relative humidity | 14 | |||
| Transport temperature | -20 | 50 | °C | Transport of packed connectors | 14 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Brass | tin | PIN Brass Tin-plated | 17 |
CAD (KiCad official)
- Symbol:
HC-XH-2AWD-K - Footprint:
Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal - 3D model: JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal (KiCad packages3D, STEP)
- 3D model files:
hc-xh-2awd-k-etched.step/hc-xh-2awd-k-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc-xh-2awd-k.step/hc-xh-2awd-k.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HCTL datasheet (23 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HC-XH-2AWD-K
**HCTL** · Wire To Board Connector · JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal
HC-XH-2AWD-K from HCTL, in a JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal |
| Category | Connectors |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient operating temperature range | | -25 | | 85 | °C | Ambient temperature range | 3 |
| Rated voltage | | | | 250 | V | AC/DC rated voltage | 5 |
| Rated current | | | | 3 | A | AC/DC rated current | 5 |
| Contact resistance (initial) | | | | 20 | mΩ | Mate connector; max 20 mV and max 100 mA applied; excludes wire resistance | 5 |
| Insulation resistance (initial) | | 1000 | | | MΩ | 500 V DC for 1 min between adjacent contacts | 5 |
| Withstand voltage leakage current | | | | 0.5 | mA | 1000 V AC(rms) for 1 min between adjacent terminals and ground of mated connectors | 5 |
| Current discontinuity during vibration | | | | 1 | µs | Vibration test 7.7 on mated connectors soldered to PCB | 7 |
| Contact resistance after vibration | | | | 20 | mΩ | After vibration test 7.7 | 7 |
| Contact resistance after durability | | | | 20 | mΩ | After 30 mating/unmating cycles at max 10 cycles per minute, before environmental test | 7 |
| Temperature rise at maximum rated current | | | | 30 | °C | Mated connector with maximum rated current passed | 8 |
| Contact resistance after thermal aging | | | | 20 | mΩ | Thermal aging at 85±2°C for 96 h | 8 |
| Contact resistance after humidity and thermal shock | | | | 20 | mΩ | After constant humidity (90-95% RH, 96 h) and thermal shock tests, as printed on page 9 | 9 |
| Insulation resistance after humidity and thermal shock | | 1000 | | | MΩ | After constant humidity and thermal shock tests, as printed on page 9 | 9 |
| Contact resistance after salt spray | | | | 20 | mΩ | Salt spray at 35±3°C, 5±1% solution, 24 h | 10 |
| Reflow soldering time | | | | 20 | s | Reflow soldering at 255±5°C | 12 |
| Storage temperature (packaged) | | -20 | | 40 | °C | Packaged connectors stored in warehouse air | 14 |
| Storage relative humidity (packaged) | | | | 80 | % | Packaged connectors stored in warehouse air, relative humidity | 14 |
| Transport temperature | | -20 | | 50 | °C | Transport of packed connectors | 14 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Brass | tin | PIN Brass Tin-plated | 17 |
## CAD (KiCad official)
- Symbol: `HC-XH-2AWD-K`
- Footprint: `Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal`
- 3D model: JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal (KiCad packages3D, STEP)
- 3D model files: `hc-xh-2awd-k-etched.step` / `hc-xh-2awd-k-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hc-xh-2awd-k.step` / `hc-xh-2awd-k.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HCTL datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603090505463324672) (23 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `connector numbering` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hc-xh-2awd-k-datasheet.pdf)