main
Ray
Publish 0.1.0
7427397
HC-VH-6A6-M
HCTL · Wire To Board Connector · JST_VH_B6P-VH_1x06_P3.96mm_Vertical
HC-VH-6A6-M from HCTL, in a JST_VH_B6P-VH_1x06_P3.96mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | JST_VH_B6P-VH_1x06_P3.96mm_Vertical |
| Category | Connectors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating ambient temperature range | -40 | 105 | ℃ | Ambient temperature range | 3 | ||
| Rated voltage | 250 | V | AC, DC voltage rating | 5 | |||
| Rated current | 7 | A | AC, DC current rating | 5 | |||
| Contact resistance (initial) | 20 | mΩ | Mated connector; max test voltage 20 mV and max test current 100 mA; excludes wire resistance | 5 | |||
| Withstanding voltage leakage current | 0.5 | mA | 1500 V AC (rms) for 1 min between adjacent terminals and ground of mated connectors | 5 | |||
| Contact resistance after vibration | 40 | mΩ | After vibration test (7.7), 1.5 mm p-p, 10-55-10 Hz, 2 h per axis | 7 | |||
| Current discontinuity during vibration | 1 | µsec | During vibration test (7.7) | 7 | |||
| Contact resistance after durability | 40 | mΩ | After 30 mating/unmating cycles at max 10 cycles per minute (7.6) | 7 | |||
| Contact resistance after thermal aging | 40 | mΩ | After thermal aging at 85±2℃ for 96 h (8.1) | 8 | |||
| Temperature rise at maximum rated current | 30 | ℃ | Measured at maximum rated current | 8 | |||
| Insulation resistance after constant temperature and humidity | 1000 | MΩ | After constant temperature and humidity test, 90-95% RH, 96 h (8.3) | 9 | |||
| Contact resistance after salt spray | 40 | mΩ | After salt spray test, 5±1% solution, 35±3℃ (8.5) | 10 | |||
| Solder area | 90 | % | Solderability test (8.6), solder temperature 260±3℃, immersion 3±0.5 s | 10 | |||
| Single contact insertion force | 8 | N | Housing with terminals mated to wafer at 25±3 mm/min (7.3) | 6 | |||
| Single contact withdrawal force | 2 | N | Terminal-to-housing withdrawal at 25±3 mm/min (7.4) | 6 | |||
| Pin retention force | 30 | N | Force applied to pin end at 25±3 mm/min until pin exits seat (7.5) | 6 | |||
| Fixed terminal and housing retention force | 30 | N | Terminal pulled from housing along wire direction at 25±3 mm/min (7.2) | 6 |
CAD (KiCad official)
- Symbol:
HC-VH-6A6-M - Footprint:
Connector_JST:JST_VH_B6P-VH_1x06_P3.96mm_Vertical - 3D model: JST_VH_B6P-VH_1x06_P3.96mm_Vertical (KiCad packages3D, STEP)
- 3D model files:
hc-vh-6a6-m-etched.step/hc-vh-6a6-m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc-vh-6a6-m.step/hc-vh-6a6-m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HCTL datasheet (23 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HC-VH-6A6-M
**HCTL** · Wire To Board Connector · JST_VH_B6P-VH_1x06_P3.96mm_Vertical
HC-VH-6A6-M from HCTL, in a JST_VH_B6P-VH_1x06_P3.96mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | JST_VH_B6P-VH_1x06_P3.96mm_Vertical |
| Category | Connectors |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating ambient temperature range | | -40 | | 105 | ℃ | Ambient temperature range | 3 |
| Rated voltage | | | | 250 | V | AC, DC voltage rating | 5 |
| Rated current | | | | 7 | A | AC, DC current rating | 5 |
| Contact resistance (initial) | | | | 20 | mΩ | Mated connector; max test voltage 20 mV and max test current 100 mA; excludes wire resistance | 5 |
| Withstanding voltage leakage current | | | | 0.5 | mA | 1500 V AC (rms) for 1 min between adjacent terminals and ground of mated connectors | 5 |
| Contact resistance after vibration | | | | 40 | mΩ | After vibration test (7.7), 1.5 mm p-p, 10-55-10 Hz, 2 h per axis | 7 |
| Current discontinuity during vibration | | | | 1 | µsec | During vibration test (7.7) | 7 |
| Contact resistance after durability | | | | 40 | mΩ | After 30 mating/unmating cycles at max 10 cycles per minute (7.6) | 7 |
| Contact resistance after thermal aging | | | | 40 | mΩ | After thermal aging at 85±2℃ for 96 h (8.1) | 8 |
| Temperature rise at maximum rated current | | | | 30 | ℃ | Measured at maximum rated current | 8 |
| Insulation resistance after constant temperature and humidity | | 1000 | | | MΩ | After constant temperature and humidity test, 90-95% RH, 96 h (8.3) | 9 |
| Contact resistance after salt spray | | | | 40 | mΩ | After salt spray test, 5±1% solution, 35±3℃ (8.5) | 10 |
| Solder area | | 90 | | | % | Solderability test (8.6), solder temperature 260±3℃, immersion 3±0.5 s | 10 |
| Single contact insertion force | | | | 8 | N | Housing with terminals mated to wafer at 25±3 mm/min (7.3) | 6 |
| Single contact withdrawal force | | 2 | | | N | Terminal-to-housing withdrawal at 25±3 mm/min (7.4) | 6 |
| Pin retention force | | 30 | | | N | Force applied to pin end at 25±3 mm/min until pin exits seat (7.5) | 6 |
| Fixed terminal and housing retention force | | 30 | | | N | Terminal pulled from housing along wire direction at 25±3 mm/min (7.2) | 6 |
## CAD (KiCad official)
- Symbol: `HC-VH-6A6-M`
- Footprint: `Connector_JST:JST_VH_B6P-VH_1x06_P3.96mm_Vertical`
- 3D model: JST_VH_B6P-VH_1x06_P3.96mm_Vertical (KiCad packages3D, STEP)
- 3D model files: `hc-vh-6a6-m-etched.step` / `hc-vh-6a6-m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hc-vh-6a6-m.step` / `hc-vh-6a6-m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HCTL datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8782670654753918976) (23 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `connector numbering` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hc-vh-6a6-m-datasheet.pdf)