main
Ray
Publish 0.1.0
9fc492e
HC-VH-2A2-M
HCTL · Wire To Board Connector · JST_VH_B2P-VH_1x02_P3.96mm_Vertical
HC-VH-2A2-M from HCTL, in a JST_VH_B2P-VH_1x02_P3.96mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | JST_VH_B2P-VH_1x02_P3.96mm_Vertical |
| Category | Connectors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated current | 7 | A | AC, DC | 18 | |||
| Rated voltage | 250 | V | AC, DC | 18 | |||
| Ambient temperature range | -40 | 105 | °C | 3 | |||
| Contact resistance (initial) | 20 | mΩ | Mated connector, max 20 mV and max 100 mA applied | 5 | |||
| Withstanding voltage leakage current | 0.5 | mA | 1500 V AC(rms) for 1 min, adjacent terminals and ground of mated connectors | 5 | |||
| Temperature rise of contact | 30 | °C | Maximum rated current passed | 8 | |||
| Contact resistance after vibration | 40 | mΩ | After vibration test, 1.5 mm p-p, 10-55-10 Hz, 2 h per axis | 7 | |||
| Current discontinuity during vibration | 1 | µsec | Vibration test, 1.5 mm p-p | 7 | |||
| Contact resistance after durability | 40 | mΩ | 30 mating cycles, max 10 cycles per minute, before environmental test | 7 | |||
| Contact resistance after thermal aging | 40 | mΩ | 85±2 °C, 96 hours continuously | 8 | |||
| Contact resistance after thermal shock | 40 | mΩ | -40±3 °C / 105±3 °C, 30 min each, 5 cycles | 9 | |||
| Insulation resistance after humidity test | 1000 | MΩ | Relative humidity 90-95%, 96 hours continuously | 9 | |||
| Solderability soldering area | 90 | % | Solder temperature 260±3 °C, immersion 3±0.5 s | 10 | |||
| Single contact insertion force | 8 | N | Housing with terminal mated to wafer, 25±3 mm/min | 6 | |||
| Single contact withdrawal force | 2 | N | Terminal pulled from hole seat, 25±3 mm/min | 6 | |||
| Fixed terminal to hole seat retention force | 30 | N | Terminal pulled from hole seat along wire direction, 25±3 mm/min | 6 | |||
| Pin retention force (seat pull-out) | 30 | N | Force on pin end until pin exits seat, 25±3 mm/min | 6 | |||
| Terminal crimp wire strength, AWG#16 | 130 | N | Axial pull-out of crimped wire, AWG#16 | 6 | |||
| Terminal crimp wire strength, AWG#18 | 80 | N | Axial pull-out of crimped wire, AWG#18 | 6 | |||
| Terminal crimp wire strength, AWG#20 | 60 | N | Axial pull-out of crimped wire, AWG#20 | 6 | |||
| Terminal crimp wire strength, AWG#22 | 40 | N | Axial pull-out of crimped wire, AWG#22 | 6 | |||
| Storage temperature | 10 | 40 | °C | Packed connectors, storage warehouse | 14 | ||
| Storage relative humidity | 50 | 80 | %RH | Packed connectors, storage warehouse | 14 | ||
| Transport temperature | 10 | 50 | °C | Packed connectors in transport | 14 |
CAD (KiCad official)
- Symbol:
HC-VH-2A2-M - Footprint:
Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical - 3D model: JST_VH_B2P-VH_1x02_P3.96mm_Vertical (KiCad packages3D, STEP)
- 3D model files:
hc-vh-2a2-m-etched.step/hc-vh-2a2-m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc-vh-2a2-m.step/hc-vh-2a2-m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HCTL datasheet (23 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HC-VH-2A2-M
**HCTL** · Wire To Board Connector · JST_VH_B2P-VH_1x02_P3.96mm_Vertical
HC-VH-2A2-M from HCTL, in a JST_VH_B2P-VH_1x02_P3.96mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | JST_VH_B2P-VH_1x02_P3.96mm_Vertical |
| Category | Connectors |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated current | | | | 7 | A | AC, DC | 18 |
| Rated voltage | | | | 250 | V | AC, DC | 18 |
| Ambient temperature range | | -40 | | 105 | °C | | 3 |
| Contact resistance (initial) | | | | 20 | mΩ | Mated connector, max 20 mV and max 100 mA applied | 5 |
| Withstanding voltage leakage current | | | | 0.5 | mA | 1500 V AC(rms) for 1 min, adjacent terminals and ground of mated connectors | 5 |
| Temperature rise of contact | | | | 30 | °C | Maximum rated current passed | 8 |
| Contact resistance after vibration | | | | 40 | mΩ | After vibration test, 1.5 mm p-p, 10-55-10 Hz, 2 h per axis | 7 |
| Current discontinuity during vibration | | | | 1 | µsec | Vibration test, 1.5 mm p-p | 7 |
| Contact resistance after durability | | | | 40 | mΩ | 30 mating cycles, max 10 cycles per minute, before environmental test | 7 |
| Contact resistance after thermal aging | | | | 40 | mΩ | 85±2 °C, 96 hours continuously | 8 |
| Contact resistance after thermal shock | | | | 40 | mΩ | -40±3 °C / 105±3 °C, 30 min each, 5 cycles | 9 |
| Insulation resistance after humidity test | | 1000 | | | MΩ | Relative humidity 90-95%, 96 hours continuously | 9 |
| Solderability soldering area | | 90 | | | % | Solder temperature 260±3 °C, immersion 3±0.5 s | 10 |
| Single contact insertion force | | | | 8 | N | Housing with terminal mated to wafer, 25±3 mm/min | 6 |
| Single contact withdrawal force | | 2 | | | N | Terminal pulled from hole seat, 25±3 mm/min | 6 |
| Fixed terminal to hole seat retention force | | 30 | | | N | Terminal pulled from hole seat along wire direction, 25±3 mm/min | 6 |
| Pin retention force (seat pull-out) | | 30 | | | N | Force on pin end until pin exits seat, 25±3 mm/min | 6 |
| Terminal crimp wire strength, AWG#16 | | 130 | | | N | Axial pull-out of crimped wire, AWG#16 | 6 |
| Terminal crimp wire strength, AWG#18 | | 80 | | | N | Axial pull-out of crimped wire, AWG#18 | 6 |
| Terminal crimp wire strength, AWG#20 | | 60 | | | N | Axial pull-out of crimped wire, AWG#20 | 6 |
| Terminal crimp wire strength, AWG#22 | | 40 | | | N | Axial pull-out of crimped wire, AWG#22 | 6 |
| Storage temperature | | 10 | | 40 | °C | Packed connectors, storage warehouse | 14 |
| Storage relative humidity | | 50 | | 80 | %RH | Packed connectors, storage warehouse | 14 |
| Transport temperature | | 10 | | 50 | °C | Packed connectors in transport | 14 |
## CAD (KiCad official)
- Symbol: `HC-VH-2A2-M`
- Footprint: `Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical`
- 3D model: JST_VH_B2P-VH_1x02_P3.96mm_Vertical (KiCad packages3D, STEP)
- 3D model files: `hc-vh-2a2-m-etched.step` / `hc-vh-2a2-m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hc-vh-2a2-m.step` / `hc-vh-2a2-m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HCTL datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8782670644527665152) (23 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `connector numbering` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hc-vh-2a2-m-datasheet.pdf)