main
Ray
Publish 0.1.0
aa70ebd
HC-PH-8AW-G
HCTL · Wire To Board Connector · JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal
HC-PH-8AW-G from HCTL, in a JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
| 7 | 7 | passive | Contact 7; numbering follows the footprint. |
| 8 | 8 | passive | Contact 8; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal |
| Category | Connectors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient operating temperature range | -40 | 105 | °C | Ambient temperature range | 3 | ||
| Rated current | 2 | A | AC and DC rated current (HC-PH-NAW-G drawing) | 21 | |||
| Rated voltage | 250 | V | AC and DC rated voltage (HC-PH-NAW-G drawing, -G variant) | 21 | |||
| Contact resistance, initial | 20 | mΩ | Initial value, mated connector; max test voltage 20 mV and max test current 100 mA; excludes wire resistance | 5 | |||
| Contact resistance after vibration | 30 | mΩ | After vibration test (amplitude 1.5 mm p-p, 10-55-10 Hz, 2 h per axis) | 7 | |||
| Contact resistance after durability | 30 | mΩ | After 30 mating cycles at max 10 cycles/min, before environmental test | 7 | |||
| Contact resistance after thermal aging | 30 | mΩ | After high temperature aging 85±2 °C, 96 hours continuously | 8 | |||
| Contact resistance after temperature cycling | 30 | mΩ | After temperature cycling 105±3 °C / room temp / -40±3 °C, 30 min each, 5 cycles | 9 | |||
| Contact resistance after constant humidity | 30 | mΩ | After constant humidity test, 90-95 % RH, 96 hours continuously | 9 | |||
| Contact resistance after salt spray | 30 | mΩ | After salt spray test, 35±3 °C, 5±1 % solution | 10 | |||
| Current discontinuity during vibration | 1 | µsec | Max current discontinuity during vibration test | 7 | |||
| Temperature rise of contact | 30 | °C | Mated connector with maximum rated current passed | 8 | |||
| Withstanding voltage leakage current | 0.5 | mA | 800 V AC rms applied 1 min between adjacent terminals and ground, mated connectors; no breakdown or flashover | 5 | |||
| Insulation resistance after humidity or thermal shock | 1000 | MΩ | After constant humidity or thermal shock test (measured with withstand voltage test) | 9 | |||
| Solder area coverage | 90 | % | Solderability; solder temperature 260±3 °C, immersion 3±0.5 s | 10 | |||
| Reflow soldering time | 10 | S | Reflow soldering process at 255±5 °C; printed as 5~10 S Max | 12 | |||
| Storage temperature range | 10 | 40 | °C | Storage with relative humidity 50-80 %, no acidic/alkaline/corrosive gases | 14 | ||
| Transport temperature range | 10 | 50 | °C | Transportation; packed connectors | 14 | ||
| Exposure temperature after package opened | 30 | °C | Avoid exposure above this temperature after opening; use all within 24 h | 13 | |||
| Exposure humidity after package opened | 60 | %RH | Avoid exposure above this humidity after opening; use all within 24 h | 13 |
CAD (KiCad official)
- Symbol:
HC-PH-8AW-G - Footprint:
Connector_JST:JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal - 3D model: JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal (KiCad packages3D, STEP)
- 3D model files:
hc-ph-8aw-g-etched.step/hc-ph-8aw-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc-ph-8aw-g.step/hc-ph-8aw-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HCTL datasheet (25 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HC-PH-8AW-G
**HCTL** · Wire To Board Connector · JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal
HC-PH-8AW-G from HCTL, in a JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
| 7 | 7 | passive | Contact 7; numbering follows the footprint. |
| 8 | 8 | passive | Contact 8; numbering follows the footprint. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal |
| Category | Connectors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient operating temperature range | | -40 | | 105 | °C | Ambient temperature range | 3 |
| Rated current | | | | 2 | A | AC and DC rated current (HC-PH-NAW-G drawing) | 21 |
| Rated voltage | | | | 250 | V | AC and DC rated voltage (HC-PH-NAW-G drawing, -G variant) | 21 |
| Contact resistance, initial | | | | 20 | mΩ | Initial value, mated connector; max test voltage 20 mV and max test current 100 mA; excludes wire resistance | 5 |
| Contact resistance after vibration | | | | 30 | mΩ | After vibration test (amplitude 1.5 mm p-p, 10-55-10 Hz, 2 h per axis) | 7 |
| Contact resistance after durability | | | | 30 | mΩ | After 30 mating cycles at max 10 cycles/min, before environmental test | 7 |
| Contact resistance after thermal aging | | | | 30 | mΩ | After high temperature aging 85±2 °C, 96 hours continuously | 8 |
| Contact resistance after temperature cycling | | | | 30 | mΩ | After temperature cycling 105±3 °C / room temp / -40±3 °C, 30 min each, 5 cycles | 9 |
| Contact resistance after constant humidity | | | | 30 | mΩ | After constant humidity test, 90-95 % RH, 96 hours continuously | 9 |
| Contact resistance after salt spray | | | | 30 | mΩ | After salt spray test, 35±3 °C, 5±1 % solution | 10 |
| Current discontinuity during vibration | | | | 1 | µsec | Max current discontinuity during vibration test | 7 |
| Temperature rise of contact | | | | 30 | °C | Mated connector with maximum rated current passed | 8 |
| Withstanding voltage leakage current | | | | 0.5 | mA | 800 V AC rms applied 1 min between adjacent terminals and ground, mated connectors; no breakdown or flashover | 5 |
| Insulation resistance after humidity or thermal shock | | 1000 | | | MΩ | After constant humidity or thermal shock test (measured with withstand voltage test) | 9 |
| Solder area coverage | | 90 | | | % | Solderability; solder temperature 260±3 °C, immersion 3±0.5 s | 10 |
| Reflow soldering time | | | | 10 | S | Reflow soldering process at 255±5 °C; printed as 5~10 S Max | 12 |
| Storage temperature range | | 10 | | 40 | °C | Storage with relative humidity 50-80 %, no acidic/alkaline/corrosive gases | 14 |
| Transport temperature range | | 10 | | 50 | °C | Transportation; packed connectors | 14 |
| Exposure temperature after package opened | | | | 30 | °C | Avoid exposure above this temperature after opening; use all within 24 h | 13 |
| Exposure humidity after package opened | | | | 60 | %RH | Avoid exposure above this humidity after opening; use all within 24 h | 13 |
## CAD (KiCad official)
- Symbol: `HC-PH-8AW-G`
- Footprint: `Connector_JST:JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal`
- 3D model: JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal (KiCad packages3D, STEP)
- 3D model files: `hc-ph-8aw-g-etched.step` / `hc-ph-8aw-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hc-ph-8aw-g.step` / `hc-ph-8aw-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HCTL datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757864162909130752) (25 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `connector numbering` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hc-ph-8aw-g-datasheet.pdf)