main
Ray Publish 0.1.0 94f2a08

HC-PH-3AWD-R-K-10

HCTL · Wire To Board Connector · JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal

HC-PH-3AWD-R-K-10 from HCTL, in a JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Contact 1; numbering follows the footprint.
2 2 passive Contact 2; numbering follows the footprint.
3 3 passive Contact 3; numbering follows the footprint.

Key specifications

Parameter Value
Manufacturer HCTL
Package JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal
Category Connectors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Contact resistance (initial), variant drawing 10 mΩ 19
Leakage current, withstand voltage test 0.5 mA 800V AC(rms) for 1 minute between adjacent terminals and ground of mated connectors 5
Voltage rating 100 V AC, DC 19
Current rating 2 A AC, DC 19
Operating temperature range -25 85 ℃ 19
Temperature rise of contact 30 ℃ Maximum rated current passed through mated connector 8
Contact resistance after vibration 30 mΩ Vibration 1.5 mm p-p, 10-55 Hz, 2 hours per axis 7
Contact resistance after durability 30 mΩ Mate/unmate 30 cycles, max 10 cycles per minute, before environmental test 7
Current discontinuity during vibration 1 µ sec Vibration 1.5 mm p-p, 10-55 Hz 7
Contact resistance after thermal aging 30 mΩ 85±2℃ for 96 hours continuously 8
Contact resistance after humidity, temperature cycling and thermal shock 30 mΩ 9
Insulation resistance after humidity, temperature cycling and thermal shock 500 mΩ 9
Contact resistance after salt spray 30 mΩ Salt spray at 35±3 ℃, solution 5±1 % 10
Single contact insertion force 6 N Housing with terminals and wafer mated at 25±3 mm/min 6
Single contact withdrawal force 0.5 N Housing with terminals and wafer pulled at 25±3 mm/min 6
Pin retention (seat pull-out force) 15 N Force applied to pin end at 25±3 mm/min until pin exits seat 6
Fixed terminals and hole seat 15 N Terminal pulled from hole seat along wire direction at 25±3 mm/min 6
Terminal crimping wire strength, AWG#22 wire 50 N Terminal crimped to AWG#22 wire, axial pull-out at 25±3 mm/min 6
Terminal crimping wire strength, AWG#24 wire 30 N Terminal crimped to AWG#24 wire, axial pull-out at 25±3 mm/min 6
Terminal crimping wire strength, AWG#26 wire 20 N Terminal crimped to AWG#26 wire, axial pull-out at 25±3 mm/min 6
Terminal crimping wire strength, AWG#28 wire 13 N Terminal crimped to AWG#28 wire, axial pull-out at 25±3 mm/min 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts Brass tin PIN Brass Tin-plated 15

CAD (KiCad official)

  • Symbol: HC-PH-3AWD-R-K-10
  • Footprint: Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal
  • 3D model: JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal (KiCad packages3D, STEP)
  • 3D model files: hc-ph-3awd-r-k-10-etched.step / hc-ph-3awd-r-k-10-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hc-ph-3awd-r-k-10.step / hc-ph-3awd-r-k-10.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HCTL datasheet (24 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary connector numbering (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF