main
Ray
Publish 0.1.0
0ff07e2
HC-PH-3AWD-PF-K-10
HCTL · Wire To Board Connector · JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal
HC-PH-3AWD-PF-K-10 from HCTL, in a JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal |
| Category | Connectors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage rating | 100 | V AC, DC | Product drawing for HC-PH-NAWD-PF-K-10 (variant 3AWD-PF-K-10) | 18 | |||
| Current rating | 2 | A AC, DC | Product drawing for HC-PH-NAWD-PF-K-10 | 18 | |||
| Operating temperature range | -25 | 85 | ℃ | Product drawing for HC-PH-NAWD-PF-K-10 | 18 | ||
| Contact resistance (initial) | 10 | mΩ | 18 | ||||
| Insulation resistance (initial) | 1000 | mΩ | 18 | ||||
| Withstanding voltage | 800 | V AC/minute | 18 | ||||
| Leakage current at withstanding voltage | 0.5 | mA | Apply 800 V AC(rms) for 1 minute to adjacent terminals and ground of mated connectors | 5 | |||
| Insulation resistance after humidity and temperature cycling | 500 | mΩ | After constant humidity (8.3) and temperature cycling (8.4) tests | 9 | |||
| Contact resistance after humidity and temperature cycling | 30 | mΩ | After constant humidity (8.3) and temperature cycling (8.4) tests | 9 | |||
| Contact resistance after vibration | 30 | mΩ | After vibration test, amplitude 1.5 mm p-p, 10-55-10 Hz, 2 h per axis | 7 | |||
| Current discontinuity during vibration | 1 | µsec | During vibration test, amplitude 1.5 mm p-p, 10-55-10 Hz | 7 | |||
| Contact resistance after durability | 30 | mΩ | After 30 mating cycles at max 10 cycles per minute, before environmental test | 7 | |||
| Contact resistance after thermal aging | 30 | mΩ | After thermal aging at 85±2℃ for 96 hours | 8 | |||
| Temperature rise | 30 | ℃ | At maximum rated current | 8 | |||
| Contact resistance after salt spray | 30 | mΩ | After salt spray test, 35±3 ℃, 5±1 % solution | 10 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Brass | tin | PIN Brass Tin-plated | 15 |
CAD (KiCad official)
- Symbol:
HC-PH-3AWD-PF-K-10 - Footprint:
Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal - 3D model: JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal (KiCad packages3D, STEP)
- 3D model files:
hc-ph-3awd-pf-k-10-etched.step/hc-ph-3awd-pf-k-10-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc-ph-3awd-pf-k-10.step/hc-ph-3awd-pf-k-10.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HCTL datasheet (24 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HC-PH-3AWD-PF-K-10
**HCTL** · Wire To Board Connector · JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal
HC-PH-3AWD-PF-K-10 from HCTL, in a JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal |
| Category | Connectors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage rating | | | | 100 | V AC, DC | Product drawing for HC-PH-NAWD-PF-K-10 (variant 3AWD-PF-K-10) | 18 |
| Current rating | | | | 2 | A AC, DC | Product drawing for HC-PH-NAWD-PF-K-10 | 18 |
| Operating temperature range | | -25 | | 85 | ℃ | Product drawing for HC-PH-NAWD-PF-K-10 | 18 |
| Contact resistance (initial) | | | | 10 | mΩ | | 18 |
| Insulation resistance (initial) | | 1000 | | | mΩ | | 18 |
| Withstanding voltage | | 800 | | | V AC/minute | | 18 |
| Leakage current at withstanding voltage | | | | 0.5 | mA | Apply 800 V AC(rms) for 1 minute to adjacent terminals and ground of mated connectors | 5 |
| Insulation resistance after humidity and temperature cycling | | 500 | | | mΩ | After constant humidity (8.3) and temperature cycling (8.4) tests | 9 |
| Contact resistance after humidity and temperature cycling | | | | 30 | mΩ | After constant humidity (8.3) and temperature cycling (8.4) tests | 9 |
| Contact resistance after vibration | | | | 30 | mΩ | After vibration test, amplitude 1.5 mm p-p, 10-55-10 Hz, 2 h per axis | 7 |
| Current discontinuity during vibration | | | | 1 | µsec | During vibration test, amplitude 1.5 mm p-p, 10-55-10 Hz | 7 |
| Contact resistance after durability | | | | 30 | mΩ | After 30 mating cycles at max 10 cycles per minute, before environmental test | 7 |
| Contact resistance after thermal aging | | | | 30 | mΩ | After thermal aging at 85±2℃ for 96 hours | 8 |
| Temperature rise | | | | 30 | ℃ | At maximum rated current | 8 |
| Contact resistance after salt spray | | | | 30 | mΩ | After salt spray test, 35±3 ℃, 5±1 % solution | 10 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Brass | tin | PIN Brass Tin-plated | 15 |
## CAD (KiCad official)
- Symbol: `HC-PH-3AWD-PF-K-10`
- Footprint: `Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal`
- 3D model: JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal (KiCad packages3D, STEP)
- 3D model files: `hc-ph-3awd-pf-k-10-etched.step` / `hc-ph-3awd-pf-k-10-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hc-ph-3awd-pf-k-10.step` / `hc-ph-3awd-pf-k-10.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HCTL datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8600708701707911168) (24 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `connector numbering` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hc-ph-3awd-pf-k-10-datasheet.pdf)