main
Ray Publish 0.1.0 63984d9

HC-1.25-5PLT-L

HCTL · Wire To Board Connector · Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical

HC-1.25-5PLT-L from HCTL, in a Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Contact 1; numbering follows the footprint.
2 2 passive Contact 2; numbering follows the footprint.
3 3 passive Contact 3; numbering follows the footprint.
4 4 passive Contact 4; numbering follows the footprint.
5 5 passive Contact 5; numbering follows the footprint.

Key specifications

Parameter Value
Manufacturer HCTL
Package Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical
Category Connectors
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Rated current 1 A AC, DC 19
Rated voltage 125 V AC, DC 19
Operating temperature range -40 105 ℃ 19
Contact resistance (initial) 20 mΩ Max test 20 mV and 100 mA applied to mated connector; excludes wire resistance 5
Insulation resistance (PLT) 500 MΩ 19
Withstanding voltage 500 V AC 1 minute; no breakdown or flashover 19
Leakage current 0.5 mA 200 V AC (rms) for 1 minute between adjacent terminals and ground of mated connectors 5
Current discontinuity 1 µs During vibration test 7
Contact resistance after vibration 30 mΩ After vibration: 1.5 mm p-p, 10-55 Hz, 2 h per axis 7
Contact resistance after durability 30 mΩ After 30 mating cycles at max 10 cycles/min, before environmental test 7
Contact resistance after thermal aging 30 mΩ 85±2℃, 96 hours continuously 8
Temperature rise 30 ℃ At maximum rated current 8
Contact resistance after temperature cycling 30 mΩ 5 cycles, -40±3℃ and 105±3℃, 30 min each 9
Contact resistance after humidity 30 mΩ Relative humidity 90-95%, 96 hours continuously 9
Insulation resistance after humidity 100 MΩ Relative humidity 90-95%, 96 hours continuously 9
Contact resistance after salt spray 30 mΩ Salt spray, 35±3 ℃, 5±1 % solution 10
Single contact insertion force 3 N Housing mated with wafer at 25±3 mm/min 6
Single contact withdrawal force 0.3 N Terminal pulled from hole seat at 25±3 mm/min 6
Seat pull-out force (pin retention) 4 N Pin pulled from seat at 25±3 mm/min 6
Fixed terminal and hole seat force 8 N Terminal pulled from seat along wire direction at 25±3 mm/min 6
Terminal crimp wire strength (AWG #28) 13 N Axial pull at 25±3 mm/min, AWG #28 wire 6
Terminal crimp wire strength (AWG #30) 8 N Axial pull at 25±3 mm/min, AWG #30 wire 6
Terminal crimp wire strength (AWG #32) 6 N Axial pull at 25±3 mm/min, AWG #32 wire 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts 黄铜 卧贴针座-PWT 黄铜 厚 0.30mm 4

CAD (KiCad official)

  • Symbol: HC-1.25-5PLT-L
  • Footprint: Connector_Molex:Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical
  • 3D model: Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical (KiCad packages3D, STEP)
  • 3D model files: hc-1-25-5plt-l-etched.step / hc-1-25-5plt-l-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hc-1-25-5plt-l.step / hc-1-25-5plt-l.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HCTL datasheet (20 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary connector numbering (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF