main
Ray
Publish 0.1.0
1ddac27
HC-1.25-3PLT
HCTL · Wire To Board Connector · Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical
HC-1.25-3PLT from HCTL, in a Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical |
| Category | Connectors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient operating temperature range | -40 | 105 | °C | Ambient temperature range (page 3, section 3.1) | 3 | ||
| Rated current | 1 | A | AC, DC | 19 | |||
| Rated voltage | 125 | V | AC, DC | 19 | |||
| Contact resistance (initial) | 20 | mΩ | Mated connectors, max test voltage 20 mV and max test current 100 mA; does not include wire resistance | 5 | |||
| Insulation resistance | 500 | MΩ | 19 | ||||
| Withstand voltage | 500 | V AC | Withstanding voltage 500V AC / minute (drawing specification) | 19 | |||
| Leakage current at withstand voltage | 0.5 | mA | Apply 500V AC(rms) for 1 minute to adjacent terminals and ground of mated connectors | 5 | |||
| Temperature rise | 30 | °C | Mated connector, maximum rated current passed | 8 | |||
| Contact resistance after vibration | 30 | mΩ | Vibration test on soldered mated connectors, 1.5 mm p-p, 10-55-10 Hz, 2 h per axis | 7 | |||
| Current discontinuity during vibration | 1 | µs | Vibration test, 10-55-10 Hz, 2 h per axis | 7 | |||
| Contact resistance after durability | 30 | mΩ | 30 mate/unmate cycles at max 10 cycles per minute, before environmental test | 7 | |||
| Contact resistance after thermal aging | 30 | mΩ | 85±2 °C, 96 hours continuously | 8 | |||
| Contact resistance after temperature cycling | 30 | mΩ | Thermal shock, -40±3 °C / 105±3 °C, 30 min per step, 5 cycles | 9 | |||
| Contact resistance after constant humidity | 30 | mΩ | Relative humidity 90-95%, 96 hours continuously | 9 | |||
| Insulation resistance after humidity / thermal shock | 100 | MΩ | After constant humidity and thermal shock tests | 9 | |||
| Contact resistance after salt spray | 30 | mΩ | Salt spray, solution 5±1 %, 35±3 °C | 10 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | 黄铜 | 卧贴针座-PWT 黄铜 厚 0.30mm | 4 |
CAD (KiCad official)
- Symbol:
HC-1.25-3PLT - Footprint:
Connector_Molex:Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical - 3D model: Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical (KiCad packages3D, STEP)
- 3D model files:
hc-1-25-3plt-etched.step/hc-1-25-3plt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc-1-25-3plt.step/hc-1-25-3plt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HCTL datasheet (20 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HC-1.25-3PLT
**HCTL** · Wire To Board Connector · Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical
HC-1.25-3PLT from HCTL, in a Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical |
| Category | Connectors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient operating temperature range | | -40 | | 105 | °C | Ambient temperature range (page 3, section 3.1) | 3 |
| Rated current | | | | 1 | A | AC, DC | 19 |
| Rated voltage | | | | 125 | V | AC, DC | 19 |
| Contact resistance (initial) | | | | 20 | mΩ | Mated connectors, max test voltage 20 mV and max test current 100 mA; does not include wire resistance | 5 |
| Insulation resistance | | 500 | | | MΩ | | 19 |
| Withstand voltage | | | | 500 | V AC | Withstanding voltage 500V AC / minute (drawing specification) | 19 |
| Leakage current at withstand voltage | | | | 0.5 | mA | Apply 500V AC(rms) for 1 minute to adjacent terminals and ground of mated connectors | 5 |
| Temperature rise | | | | 30 | °C | Mated connector, maximum rated current passed | 8 |
| Contact resistance after vibration | | | | 30 | mΩ | Vibration test on soldered mated connectors, 1.5 mm p-p, 10-55-10 Hz, 2 h per axis | 7 |
| Current discontinuity during vibration | | | | 1 | µs | Vibration test, 10-55-10 Hz, 2 h per axis | 7 |
| Contact resistance after durability | | | | 30 | mΩ | 30 mate/unmate cycles at max 10 cycles per minute, before environmental test | 7 |
| Contact resistance after thermal aging | | | | 30 | mΩ | 85±2 °C, 96 hours continuously | 8 |
| Contact resistance after temperature cycling | | | | 30 | mΩ | Thermal shock, -40±3 °C / 105±3 °C, 30 min per step, 5 cycles | 9 |
| Contact resistance after constant humidity | | | | 30 | mΩ | Relative humidity 90-95%, 96 hours continuously | 9 |
| Insulation resistance after humidity / thermal shock | | 100 | | | MΩ | After constant humidity and thermal shock tests | 9 |
| Contact resistance after salt spray | | | | 30 | mΩ | Salt spray, solution 5±1 %, 35±3 °C | 10 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | 黄铜 | | 卧贴针座-PWT 黄铜 厚 0.30mm | 4 |
## CAD (KiCad official)
- Symbol: `HC-1.25-3PLT`
- Footprint: `Connector_Molex:Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical`
- 3D model: Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical (KiCad packages3D, STEP)
- 3D model files: `hc-1-25-3plt-etched.step` / `hc-1-25-3plt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hc-1-25-3plt.step` / `hc-1-25-3plt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HCTL datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8764984060957331456) (20 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `connector numbering` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hc-1-25-3plt-datasheet.pdf)