Generated by kicad-footprint-generator · KiCad file format 20260206
HC-1.25-2PWT
HCTL · Wire To Board Connector · Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal
HC-1.25-2PWT from HCTL, in a Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal |
| Category | Connectors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated current (AC, DC) | 1 | A | AC, DC | 5 | |||
| Rated voltage (AC, DC) | 125 | V | AC, DC | 5 | |||
| Voltage rating (variant drawing) | 125 | V | AC, DC | 20 | |||
| Current rating (variant drawing) | 1 | A | AC, DC | 20 | |||
| Withstand voltage | 500 | V | 500V AC (rms) for 1 minute between adjacent contacts and ground of mated connectors; no breakdown or flashover | 5 | |||
| Withstand voltage (variant drawing) | 500 | V | AC, 1 minute | 20 | |||
| Leakage current at withstand test | 0.5 | mA | 500V AC (rms) for 1 minute, adjacent terminals and ground of mated connectors | 5 | |||
| Contact resistance (initial) | 20 | mΩ | Mated connector, max test voltage 20 mV and max test current 100 mA; excludes wire resistance | 5 | |||
| Contact resistance (variant drawing) | 20 | mΩ | 20 | ||||
| Insulation resistance (variant drawing) | 500 | MΩ | 20 | ||||
| Temperature rise of contact | 30 | °C | Mated connector at maximum rated current | 8 | |||
| Contact resistance after vibration | 30 | mΩ | Mated, PCB-mounted; vibration 1.5mm p-p, 10-55-10 Hz, 2 h per axis | 7 | |||
| Current discontinuity during vibration | 1 | µsec | Vibration test, 1.5mm p-p, 10-55-10 Hz | 7 | |||
| Contact resistance after durability | 30 | mΩ | 30 cycles at max 10 cycles/min, before environmental test | 7 | |||
| Contact resistance after thermal aging | 30 | mΩ | 85±2°C, 96 hours continuously | 8 | |||
| Contact resistance after temperature cycling | 30 | mΩ | -40±3°C 30 min / 105±3°C 30 min, 5 cycles | 9 | |||
| Insulation resistance after humidity | 100 | MΩ | 90-95% RH, 96 hours continuously | 9 | |||
| Contact resistance after salt spray | 30 | mΩ | Salt spray, 35±3°C, solution 5±1% | 10 | |||
| Ambient operating temperature range | -40 | 105 | °C | Ambient temperature range | 20 | ||
| Storage temperature range | -20 | 40 | °C | Relative humidity ≤80%, packaged connectors in storehouse air free of acid, alkali and corrosive gases | 14 | ||
| Transport temperature range | -20 | 50 | °C | Moisture-proof transport, no mechanical damage | 14 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | 黄铜 | 卧贴针座-PWT 黄铜 厚 0.30mm | 4 |
CAD (KiCad official)
- Symbol:
HC-1.25-2PWT - Footprint:
Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal - 3D model: Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal (KiCad packages3D, STEP)
- 3D model files:
hc-1-25-2pwt-etched.step/hc-1-25-2pwt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc-1-25-2pwt.step/hc-1-25-2pwt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HCTL datasheet (20 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).