main
Ray
Publish 0.1.0
53b3089
HBLS2012-3N3S
HYHONGYEX · Inductors (SMD) · 0805
HBLS2012-3N3S from HYHONGYEX, in a 0805. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HYHONGYEX |
| Package | 0805 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC resistance (max) | DCR | 0.13 | Ω | 14 | |||
| Max. rated current | Ir | 600 | mA | 14 | |||
| Inductance decrease at rated DC current | L | 5 | % | at rated DC current (Ir) | 4 | ||
| Minimum quality factor | Q | 10 | - | test frequency 100 MHz | 14 | ||
| Minimum self-resonant frequency | S.R.F | 3000 | MHz | 14 | |||
| Inductance tolerance (code S) | L | -0.3 | 0.3 | nH | 3 | ||
| Inductance change after bend test | L | -20 | 20 | % | bend substrate 2 mm, hold 10 s | 5 | |
| Inductance change after vibration test | L | -20 | 20 | % | 10-55-10 Hz, 1.5 mm p-p, 6 h total | 5 | |
| Inductance change after temperature shock | L | -20 | 20 | % | -40 °C / +85 °C, 30 min each, 5 cycles | 5 | |
| Inductance change after humidity resistance | L | -20 | 20 | % | 60 °C, 90-95% RH, rated current, 1000 h | 5 | |
| Inductance change after high temperature resistance | L | -20 | 20 | % | +85 °C, rated current, 1000 h | 5 | |
| Inductance change after low temperature storage | L | -20 | 20 | % | -40 °C, 1000 h | 5 | |
| Inductance change after terminal strength test | L | -20 | 20 | % | 10 N applied for 10 s | 6 | |
| Operating temperature range | -40 | 85 | °C | 3 | |||
| Storage temperature range | -10 | 40 | °C | 70% RH | 3 | ||
| Nominal inductance | L | 3.3 | μH | 14 | |||
| Reflow preheat: max temperature difference between solder and ferrite | 150 | °C | preheat before soldering | 8 | |||
| Reflow cooling: max temperature difference | 100 | °C | cooling after soldering | 8 | |||
| Rework tip temperature | 280 | °C | soldering iron, 3 s max, rework once only | 9 |
CAD (KiCad official)
- Symbol:
HBLS2012-3N3S - Footprint:
Inductor_SMD:L_0805_2012Metric - 3D model: 0805 (KiCad packages3D, STEP)
- 3D model files:
hbls2012-3n3s-etched.step/hbls2012-3n3s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hbls2012-3n3s.step/hbls2012-3n3s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HYHONGYEX datasheet (15 pp, sha256
617707e1fc4d0b38, retrieved 2026-11-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HBLS2012-3N3S
**HYHONGYEX** · Inductors (SMD) · 0805
HBLS2012-3N3S from HYHONGYEX, in a 0805. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HYHONGYEX |
| Package | 0805 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC resistance (max) | DCR | | | 0.13 | Ω | | 14 |
| Max. rated current | Ir | | | 600 | mA | | 14 |
| Inductance decrease at rated DC current | L | | | 5 | % | at rated DC current (Ir) | 4 |
| Minimum quality factor | Q | 10 | | | - | test frequency 100 MHz | 14 |
| Minimum self-resonant frequency | S.R.F | 3000 | | | MHz | | 14 |
| Inductance tolerance (code S) | L | -0.3 | | 0.3 | nH | | 3 |
| Inductance change after bend test | L | -20 | | 20 | % | bend substrate 2 mm, hold 10 s | 5 |
| Inductance change after vibration test | L | -20 | | 20 | % | 10-55-10 Hz, 1.5 mm p-p, 6 h total | 5 |
| Inductance change after temperature shock | L | -20 | | 20 | % | -40 °C / +85 °C, 30 min each, 5 cycles | 5 |
| Inductance change after humidity resistance | L | -20 | | 20 | % | 60 °C, 90-95% RH, rated current, 1000 h | 5 |
| Inductance change after high temperature resistance | L | -20 | | 20 | % | +85 °C, rated current, 1000 h | 5 |
| Inductance change after low temperature storage | L | -20 | | 20 | % | -40 °C, 1000 h | 5 |
| Inductance change after terminal strength test | L | -20 | | 20 | % | 10 N applied for 10 s | 6 |
| Operating temperature range | | -40 | | 85 | °C | | 3 |
| Storage temperature range | | -10 | | 40 | °C | 70% RH | 3 |
| Nominal inductance | L | | 3.3 | | μH | | 14 |
| Reflow preheat: max temperature difference between solder and ferrite | | | | 150 | °C | preheat before soldering | 8 |
| Reflow cooling: max temperature difference | | | | 100 | °C | cooling after soldering | 8 |
| Rework tip temperature | | | | 280 | °C | soldering iron, 3 s max, rework once only | 9 |
## CAD (KiCad official)
- Symbol: `HBLS2012-3N3S`
- Footprint: `Inductor_SMD:L_0805_2012Metric`
- 3D model: 0805 (KiCad packages3D, STEP)
- 3D model files: `hbls2012-3n3s-etched.step` / `hbls2012-3n3s-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hbls2012-3n3s.step` / `hbls2012-3n3s.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HYHONGYEX datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590163997544132608) (15 pp, sha256 `617707e1fc4d0b38`, retrieved 2026-11-03, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hbls2012-3n3s-datasheet.pdf)