main
Download ZIP Propose a change
Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hbls1005-6n2s: viewers · Ray
hbls1005-6n2s-hero.glb hbls1005-6n2s: hero from the plain model · Ray
hbls1005-6n2s-hero.overlay.json hbls1005-6n2s: hero from the plain model · Ray
hbls1005-6n2s.glb Publish 0.1.0 · Ray
hbls1005-6n2s.kicad_mod Publish 0.1.0 · Ray
hbls1005-6n2s.kicad_sym hbls1005-6n2s: KiCad Device:L symbol instead of a box (two-terminal passive) · Ray
hbls1005-6n2s.lbr hbls1005-6n2s: KiCad Device:L symbol instead of a box (two-terminal passive) · Ray
hbls1005-6n2s.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

HBLS1005-6N2S

HYHONGYEX · Inductors (SMD) · 0402

HBLS1005-6N2S from HYHONGYEX, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of an unpolarised inductor or ferrite bead; either orientation.
2 2 passive Terminal 2 of an unpolarised inductor or ferrite bead; either orientation.

Key specifications

Parameter Value
Manufacturer HYHONGYEX
Package 0402
Category Inductors, Coils, Chokes
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Inductance tolerance (code S) L -0.3 0.3 nH L,Q test frequency 100 MHz; tolerance code S = ±0.3 nH 12
Minimum Quality factor Q 8 - Test frequency 100 MHz; test signal -40dBm or 100mV 12
Minimum self-resonant frequency S.R.F 3900 MHz 12
Maximum DC resistance DCR 0.3 Ω 12
Maximum rated current Ir 300 mA Inductance decrease within 5% at rated DC current 12
Thickness tolerance T -0.15 0.5 0.15 mm 12
Operating temperature range -40 85 °C 3
Storage temperature range -10 40 °C 70% RH 3
Reflow preheat temperature difference (solder to ferrite surface) 150 °C Preheat before reflow; preheat to 150 °C, max difference 8
Reflow cooling temperature difference 100 °C Cooling into solvent after soldering 8
Rework soldering iron tip temperature 280 °C Rework with soldering iron; preheat 150 °C, 1 minute; rework limited to one time 9
Rework soldering time 3 s Rework with soldering iron 9
Rework soldering iron output power 30 W Rework with soldering iron 9
Rework soldering iron tip diameter 3 mm Rework with soldering iron 9
Inductance change after bend test L -20 20 % Board bent 2 mm, held 10 s 5
Inductance change after vibration test L -20 20 % Sine wave 10-55-10 Hz, 1.5 mm peak-peak, X/Y/Z, 2 h per axis 5
Inductance change after temperature shock test L -20 20 % -40 °C / +85 °C, 30 min each, 5 cycles 5
Inductance change after humidity load test L -20 20 % 90-95% RH, 60 °C, rated current, 1000 h 5
Inductance change after high temperature load test L -20 20 % +85 °C, rated current, 1000 h 5
Inductance change after low temperature storage test L -20 20 % -40 °C, 1000 h 6
Inductance change after terminal strength test L -20 20 % 10 N applied for 10 s (0603 chip: 2 N) 6
Nominal inductance L 6.2 nH 12

CAD (KiCad official)

  • Symbol: HBLS1005-6N2S
  • Footprint: Inductor_SMD:L_0402_1005Metric
  • 3D model: 0402 (KiCad packages3D, STEP)
  • 3D model files: hbls1005-6n2s-etched.step / hbls1005-6n2s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hbls1005-6n2s.step / hbls1005-6n2s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HYHONGYEX datasheet (15 pp, sha256 0b525373f80051ea, retrieved 2026-10-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF