main
History Download
Ray Publish 0.1.0 aaf05c8

HAL3726DJ-A

TDK · Angle, Linear Position Sensors · SOIC-8

HAL3726DJ-A from TDK, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VSUP power_in Supply voltage pin; 4.5 V to 5.5 V in normal operation and 5.7 V to 6.5 V during programming, with undervoltage and overvoltage detection.
2 GND power_in Ground reference for all voltages.
3 TEST input Test input pin; recommended to be connected to the GND pin.
4 OUT bidirectional Push-pull output (ratiometric analog for HAL 372x) and programming pin, with continuous output current of 1.2 mA max for HAL 372x and a 5 kΩ to 10 kΩ load resistor.
5 NC unconnected Not connected internally; datasheet says to connect to GND.
6 NC unconnected Not connected internally; datasheet says to connect to GND.
7 NC unconnected Not connected internally; datasheet says to connect to GND.
8 NC unconnected Not connected internally; datasheet says to connect to GND.

Key specifications

Parameter Value
Manufacturer TDK
Package SOIC-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (normal operation) VSUP 4.5 5 5.5 V Normal Operation 32
Supply Voltage (during programming) VSUP 5.7 6 6.5 V During Programming 32
Continuous Output Current IOUT -1.2 1.2 mA HAL 3715 and HAL 372x 32
Load Resistor RL 5 10 kΩ HAL 3715 and HAL 372x pull-up & pull-down resistor 32
Load Capacitance CL 0.33 47 330 nF HAL 3715 and HAL 372x 32
Number of Memory Programming Cycles NPRG 100 cycles 0 °C < Tamb < 55 °C 32
Recommended Magnetic Field Amplitude BAMP 20 100 mT 32
Junction Temperature TJ -40 170 °C for 1000 hrs 32
Ambient Temperature TA -40 150 °C 32
Supply Voltage VSUP -20 20 V t < 1 hr 31
Output Voltage VOUT -6 20 V t < 1 hr 31
Excess of Output Voltage over Supply Voltage VOUT - VSUP 2 V 31
Continuous Output Current IOUT -10 10 mA 31
Junction Temperature under Bias TJ -50 190 °C For 96 h 31
Ambient Temperature TA -40 160 °C 31
Transportation/Short Term Storage Temperature Tstorage -55 150 °C Device only without packing material 31
ESD Protection VESD -4 4 kV AEC-Q100-002 (100 pF and 1.5 kΩ) 31
Supply Current over Temperature Range ISUP 8 13 mA 33
Start-up Time tStartup 1.7 ms CL = 10 nF, LP-FILTER = OFF 33
Undervoltage Detection Level VSUP,UV 3.3 3.9 4.3 V Functionality Mode: Normal 33
Undervoltage Detection Level VSUP,UV 3.1 3.7 4.1 V Functionality Mode: Extended 33
Overvoltage Detection Level VSUP,OV 5.6 6.2 6.9 V Functionality Mode: Normal 33
Overvoltage Detection Level VSUP,OV 8.5 9.5 10.4 V Functionality Mode: Extended 33
Output Voltage Range of Lower Error Band VError,Low 0 4 %VSUP VSUP > VSUP,DIAG, Analog Output, 5 kΩ ≤ RL ≤ 200 kΩ 33
Output Voltage Range of Upper Error Band VError,High 96 100 %VSUP VSUP > VSUP,DIAG, Analog Output, 5 kΩ ≤ RL ≤ 200 kΩ 33
Overall Signal Delay tOSD 0.312 0.343 ms Based on 8 kHz sample frequency 34
Differential Non-Linearity of D/A converter DNL -3 0 3 LSB 34
Ratiometric Error of Output over temperature ER -0.12 0 0.12 % at VOUT = 10% and 90% VSUP 34
Non-Linearity of D/A converter INL -0.1 0 0.1 % % of supply voltage 34
D/A converter offset drift over temperature range VOFFSET -0.2 0 0.2 %VSUP 34
Output High Voltage VOUTH 93 %VSUP RL Pull-up/-down = 5 kΩ 34
Output Low Voltage VOUTL 7 %VSUP RL Pull-up/-down = 5 kΩ 34
Accuracy of Output Voltage at Clamping Low VOUTCL -30 0 30 mV RL Pull-up/-down = 5 kΩ, VSUP = 5V 34
Accuracy of Output Voltage at Clamping High VOUTCH -30 0 30 mV 34
Output Noise RMS OUTNoise 2 5.2 mV Output range 10% to 90% 34
Output Resistance ROUT 1 10 Ω VOUTLmax ≤ VOUT ≤ VOUTHmin 34
Output voltage at open VSUP line VOUT 0 0 0.15 V VSUP = 5 V, RL = 10 kΩ to 200 kΩ 35
Output voltage at open VSUP line VOUT 0 0 0.2 V VSUP = 5 V, 5 kΩ ≤ RL < 10 kΩ 35
Output voltage at open GND line VOUT 4.85 4.9 5 V VSUP = 5 V, RL = 10 kΩ to 200 kΩ 35
Output voltage at open GND line VOUT 4.8 4.9 5 V VSUP = 5 V, 5 kΩ ≤ RL < 10 kΩ 35
XY angle linearity error Elinxy -0.5 0.5 ° Min. BAMP = 30 mT, TA = 25 °C 38
XY angle linearity error over temperature Elinxy -1.2 1.2 ° Min. BAMP = 30 mT 38
XY angle linearity error over temperature Elinxy -1.7 1.7 ° Min. BAMP = 20 mT 38
Absolute sensitivity mismatch X/Y and Z ASMmX/Y_Z -3 3 % for SOIC8 package, TA = 25 °C 38
Sensitivity of X/Y and Z Hall Plate SenseXYZ 118 128 138 LSB/mT TA = 25 °C 38
Thermal sensitivity mismatch drift X/Y and Z SMmX/Y_Z -2.5 2.5 % over full temperature range related to 25 °C 38
Thermal sensitivity mismatch drift X and Y SMmXY -2 2 % over full temperature range related to 25 °C 38
Offset of calibrated signals X or Y channel OffsetXY -20 20 LSB15 TA = 25 °C 38
Offset of calibrated signal Z channel OffsetZ -12 12 LSB15 TA = 25 °C 38
Offset drift X or Y channel OffsetXY -70 70 LSB15 over full temperature range related to 25 °C 38
Offset drift Z channel OffsetZ -10 10 LSB15 over full temperature range related to 25 °C 38
Undervoltage Detection Level Hysteresis VSUP,UVhyst 200 mV 33
Overvoltage Detection Level Hysteresis VSUP,OVhyst 225 mV 33
Supply Voltage required to get defined Output Voltage Level VSUP,DIAG 2.3 V 33
Resolution 12 bit for HAL 3715/HAL 372x ratiometric to VSUP 33

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin solderability is guaranteed between end of pin and distance F1. Sn-thickness might be reduced by mechanical handling. 28

CAD (KiCad official)

  • Symbol: HAL3726DJ-A
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: hal3726dj-a-etched.step / hal3726dj-a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hal3726dj-a.step / hal3726dj-a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TDK datasheet (46 pp, sha256 a6f91585bc1a024e, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF