main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs hal206so: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers hal206so: viewers · Ray
hal206so-etched.fit.json hal206so: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hal206so-etched.glb hal206so: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hal206so-etched.step hal206so: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hal206so.glb Publish 0.1.0 · Ray
hal206so.kicad_mod Publish 0.1.0 · Ray
hal206so.kicad_sym Publish 0.1.0 · Ray
hal206so.lbr Publish 0.1.0 · Ray
hal206so.step Publish 0.1.0 · Ray
package.json hal206so: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json hal206so: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/hal206so · Ray

HAL206SO

Hallwee · Linear Hall Sensors · SOT-23-3L

HAL206SO from Hallwee, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Supply voltage input; operating range 1.8 V to 5.5 V (abs. max 6 V); decouple with 0.1-1 µF capacitor between VCC and GND.
2 OUT output CMOS push-pull output; drives low (VOL ≤ 0.2 V at IOUT = 0.5 mA) when N pole is near the marked side of the package (B ≥ Bop), drives high when field is released (B ≤ Brp); max IOUT 1 mA, max VOUT 6 V.
3 GND power_in Ground reference for supply voltage and output circuit.

Key specifications

Parameter Value
Manufacturer Hallwee
Package SOT-23-3L
Category Magnetic Sensors
Pins 3

CAD (KiCad official)

  • Symbol: HAL206SO
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3L (KiCad packages3D, STEP)
  • 3D model files: hal206so-etched.step / hal206so-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hal206so.step / hal206so.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Hallwee datasheet (11 pp, sha256 9ca4f4ee1f8714fc, retrieved 2026-09-21, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-4-6 (vision), consensus claude-opus-4-7 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF