main
History Download
Ray Publish 0.1.0 ac7aa90

HAL1506SU-A

TDK · Magnetic Sensors · SOT-23

HAL1506SU-A from TDK, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VSUP power_in Supply voltage pin, recommended operating range 2.7 V to 24 V (absolute maximum 28 V for t < 96 h) with built-in reverse voltage protection.
2 OUT output Open-drain output, recommended up to 24 V and 25 mA output current (absolute maximum 28 V and 65 mA), forced to High-Z in fault conditions and current-limited.
3 GND power_in Ground reference pin for all voltages listed in the datasheet.

Key specifications

Parameter Value
Manufacturer TDK
Package SOT-23
Category Sensors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VSUP 2.7 24 V 17
Junction temperature range TJ -40 170 °C 17
Output voltage VOUT 24 V 17
Output current IOUT 25 mA 17
Undervoltage threshold VUV 2 2.7 V 18
Supply current ISUP 1.1 1.6 2.4 mA 18
Reverse current ISUPR -1 mA for VSUP = 18 V 18
Port low output voltage Vol 0.13 0.4 V IO = 20 mA 18
Port low output voltage Vol 0.5 V IO = 25 mA 18
Output leakage current Ioleak 0.1 10 µA 18
Output fall time tf 1 µs VSUP = 12 V; RL = 820; CL = 20 pF 18
Output rise time tr 1 µs VSUP = 12 V; RL = 820; CL = 20 pF 18
Output jitter (RMS) tj 0.58 0.72 µs For square wave signal with 1 kHz 18
Delay time td 16 21 µs 18
Output refresh period tsamp 1.6 2.2 3 µs 18
Enable time of output after exceeding of VUV ten 20 50 60 µs VSUP = 12 V 18
Double sample period tdsamp 3.2 4.4 6 µs 19
Effective noise of magnetic switching points (RMS) Bnoise 72 µT For square wave signal with 12 kHz 18
On point BON BON 16.5 20.8 24.8 mT TJ = -40 °C 31
Off point BOFF BOFF 14 18.9 22.5 mT TJ = -40 °C 31
Hysteresis BHYS BHYS 1.9 mT TJ = -40 °C 31
On point BON BON 15.4 18.9 22.6 mT TJ = 25 °C 31
Off point BOFF BOFF 13.8 17.3 21 mT TJ = 25 °C 31
Hysteresis BHYS BHYS 1.6 mT TJ = 25 °C 31
On point BON BON 13 17 19.5 mT TJ = 170 °C 31
Off point BOFF BOFF 11.8 15.8 18.2 mT TJ = 170 °C 31
Hysteresis BHYS BHYS 1.2 mT TJ = 170 °C 31
Temperature coefficient of magnetic switching points 1200 ppm/K at room temperature 30
Junction temperature range TJ -40 190 °C t < 96 h 16
Transportation/Short-Term Storage Temperature Tstorage -50 155 °C Device only without packing material 16
Supply voltage VSUP -18 28 V t < 96 h 16
Supply voltage VSUP 32 V t < 5 min 16
Supply voltage VSUP 40 V t < 10 x 400 ms Load-Dump, with series resistor RV > 100 16
Output voltage VOUT -0.5 28 V t < 96 h 16
Output current IO 65 mA 16
Reverse output current IOR -50 mA 16
Thermal resistance junction to air Rthja 300 K/W Determined with a 1s0p board 19
Thermal resistance junction to air Rthja 250 K/W Determined with a 1s1p board 19
Thermal resistance junction to air Rthja 210 K/W Determined with a 2s2p board 19
Thermal resistance junction to case Rthjc 30 K/W Determined with a 1s0p board 19
Thermal resistance junction to case Rthjc 50 K/W Determined with a 1s1p board 19
Thermal resistance junction to case Rthjc 40 K/W Determined with a 2s2p board 19
Human body model VHBM -8 8 kV according to AEC Q100-002 17

CAD (KiCad official)

  • Symbol: HAL1506SU-A
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: hal1506su-a-etched.step / hal1506su-a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hal1506su-a.step / hal1506su-a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TDK datasheet (43 pp, sha256 baf01705991b98c2, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF