HACS712ELCTR-20A-T

{
  "slug": "hacs712elctr-20a-t",
  "version": "0.1.0",
  "type": "component",
  "description": "HXY MOSFET Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "magnetic sensors",
    "hacs712elctr-20a-t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hacs712elctr-20a-t.kicad_sym",
    "hacs712elctr-20a-t.kicad_mod",
    "hacs712elctr-20a-t.glb",
    "hacs712elctr-20a-t.step",
    "hacs712elctr-20a-t.lbr",
    "docs/hero.png",
    "docs/hacs712elctr-20a-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hacs712elctr-20a-t-hero.glb",
    "hacs712elctr-20a-t-hero.overlay.json",
    "hacs712elctr-20a-t-etched.glb"
  ],
  "component": {
    "mpn": "HACS712ELCTR-20A-T",
    "manufacturer": "HXY MOSFET",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Magnetic Sensors",
    "subcategory": "Current Sensors",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603011225156800512",
    "parts": {
      "symbol": "hacs712elctr-20a-t.kicad_sym",
      "footprint": "hacs712elctr-20a-t.kicad_mod",
      "model_3d": "hacs712elctr-20a-t-hero.glb",
      "model_3d_plain": "hacs712elctr-20a-t-etched.glb",
      "model_3d_step": "hacs712elctr-20a-t-etched.step",
      "model_3d_step_plain": "hacs712elctr-20a-t.step",
      "lbr": "hacs712elctr-20a-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C22449572"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T20:50:33Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IP+",
        "type": "passive",
        "description": "Positive measured-current input terminal; pins 1 and 2 are shorted together in the typical application, and the terminal withstands a transient surge current of 100 A for a 100 ms pulse."
      },
      {
        "number": "2",
        "name": "IP+",
        "type": "passive",
        "description": "Positive measured-current input terminal, shorted to pin 1 in the typical application, with the same 100 A / 100 ms transient surge rating on the current sampling terminal."
      },
      {
        "number": "3",
        "name": "IP-",
        "type": "passive",
        "description": "Negative measured-current input terminal; pins 3 and 4 are shorted together in the typical application, and the current sampling terminal is rated for a 100 A transient surge over 100 ms."
      },
      {
        "number": "4",
        "name": "IP-",
        "type": "passive",
        "description": "Negative measured-current input terminal, shorted to pin 3 in the typical application, with the same 100 A / 100 ms transient surge rating on the current sampling terminal."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the sensor, also listed by the datasheet as a ground/programming pin; a filter capacitor CVcc is connected between VCC and this ground in the typical application."
      },
      {
        "number": "6",
        "name": "TEST",
        "type": "unconnected",
        "description": "Factory testing pin that the datasheet describes as floating; it has no stated functional limits for application use."
      },
      {
        "number": "7",
        "name": "OUT",
        "type": "output",
        "description": "Analog proportional output, with saturation of about 0.5 V low and VCC-0.3 V high at RL ≥ 4.7 kΩ, a load capacitance of 0.5 to 1 nF to GND, a source limit of 80 mA and a sink limit of 40 mA; also a signal output/programming pin."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input with operating range 4.5 V to 5.5 V (5 V typical) and a 6 V absolute maximum rating; also a power supply/programming pin, with a filter capacitor CVcc to GND recommended."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The page 3 pin table has scrambled columns: names and numbers are listed in rows, but the function c; Pin functions for GND, TEST, OUT and VCC were matched to row order because the function column is no; The HACS712ELCTR-20A-T is listed as SOP-8 tape on page 2 (3000 pcs/reel), so the package variant mat"
        ],
        "pages_sent": 14,
        "cost_usd": 0.0428,
        "at": "2026-10-18T20:50:17"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603011225156800512",
        "pages": 14,
        "sha256": "5be6921558673890",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "hacs712elctr-20a-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hacs712elctr-20a-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5eceda0e0a1a4548cfefb5eccb9744c729a2c3c08a3e0bb3367dfcd08c2a3028",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}