main
Ray
h7230-1m5r: specified limits as data (metadata.characteristics, 12 rows from the datasheet)
0a79388
H7230-1M5R
Shanghai Siproin Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
H7230-1M5R from Shanghai Siproin Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input. Operating range 3.5 V to 15 V (absolute max 18 V). Bypass with a 1 uF (recommended tantalum) capacitor to GND close to the pin. |
| 2 | GND | power_in | Ground / device return (shown as VSS in the block diagram). Common reference for VIN, VOUT and CE. |
| 3 | CE | input | Chip Enable, active high. Drive high to enable the regulator; drive low to shut it down. Do not leave floating - tie through a pull-up (typ. 10 kOhm to VIN per the application circuit) or drive from a logic source. |
| 4 | NC | unconnected | No internal connection. Leave floating or tie to GND per board convention. |
| 5 | VOUT | power_out | Regulated 3.0 V output (±2%), >400 mA capable. Requires a 1 uF (recommended tantalum) output capacitor to GND for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Siproin Microelectronics |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
H7230-1M5RH7230-1M5RM5GH7230-1M5RM5XH7230-1M5RPRH7230-1M5RPGH7230-1M5RPXH7230-1M5RMRH7230-1M5RMGH7230-1M5RMX
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (±2% of VOUT) | VOUT | -2 | 2 | % | VIN=VOUT+1V, 1.0mA≤IOUT≤30mA | 4 | |
| Line regulation | 0.05 | 0.2 | %/V | 1.6V≤VIN≤8V, IOUT=100mA | 4 | ||
| Load regulation | ΔVOUT | 12 | 30 | mV | VIN=VOUT+1V, 1.0mA≤IOUT≤100mA | 4 | |
| Output voltage temperature coefficient | -100 | 100 | ppm/℃ | IOUT=30mA, 0℃≤Ta≤70℃ | 4 | ||
| Supply current | Iss1 | 1 | 2 | uA | 4 | ||
| Input voltage | VIN | 3.5 | 15 | V | 4 | ||
| Dropout voltage | Vdif | 0.12 | 0.14 | V | 2.0<VOUT≤3.0 (applies to 3.0V), IOUT=80mA | 5 | |
| Supply voltage input (absolute maximum) | VIN | -0.3 | 18 | V | 4 | ||
| Operating temperature | Tamb | -40 | 85 | ℃ | 4 | ||
| Storage temperature | Tstg | -40 | 125 | ℃ | 4 | ||
| PSRR | PSRR | 40 | dB | F=1KHz, VIN=VOUT+1V | 4 | ||
| Output current | IOUT | 400 | mA | VIN - VOUT=1V | 4 |
CAD (KiCad official)
- Symbol:
H7230-1M5R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
h7230-1m5r-etched.step/h7230-1m5r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);h7230-1m5r.step/h7230-1m5r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Siproin Microelectronics datasheet (None pp, sha256
a7811815b9ea1f49, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# H7230-1M5R
**Shanghai Siproin Microelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
H7230-1M5R from Shanghai Siproin Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input. Operating range 3.5 V to 15 V (absolute max 18 V). Bypass with a 1 uF (recommended tantalum) capacitor to GND close to the pin. |
| 2 | GND | power_in | Ground / device return (shown as VSS in the block diagram). Common reference for VIN, VOUT and CE. |
| 3 | CE | input | Chip Enable, active high. Drive high to enable the regulator; drive low to shut it down. Do not leave floating - tie through a pull-up (typ. 10 kOhm to VIN per the application circuit) or drive from a logic source. |
| 4 | NC | unconnected | No internal connection. Leave floating or tie to GND per board convention. |
| 5 | VOUT | power_out | Regulated 3.0 V output (±2%), >400 mA capable. Requires a 1 uF (recommended tantalum) output capacitor to GND for stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Siproin Microelectronics |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
- `H7230-1M5R`
- `H7230-1M5RM5G`
- `H7230-1M5RM5X`
- `H7230-1M5RPR`
- `H7230-1M5RPG`
- `H7230-1M5RPX`
- `H7230-1M5RMR`
- `H7230-1M5RMG`
- `H7230-1M5RMX`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (±2% of VOUT) | VOUT | -2 | | 2 | % | VIN=VOUT+1V, 1.0mA≤IOUT≤30mA | 4 |
| Line regulation | | | 0.05 | 0.2 | %/V | 1.6V≤VIN≤8V, IOUT=100mA | 4 |
| Load regulation | ΔVOUT | | 12 | 30 | mV | VIN=VOUT+1V, 1.0mA≤IOUT≤100mA | 4 |
| Output voltage temperature coefficient | | -100 | | 100 | ppm/℃ | IOUT=30mA, 0℃≤Ta≤70℃ | 4 |
| Supply current | Iss1 | | 1 | 2 | uA | | 4 |
| Input voltage | VIN | 3.5 | | 15 | V | | 4 |
| Dropout voltage | Vdif | | 0.12 | 0.14 | V | 2.0<VOUT≤3.0 (applies to 3.0V), IOUT=80mA | 5 |
| Supply voltage input (absolute maximum) | VIN | -0.3 | | 18 | V | | 4 |
| Operating temperature | Tamb | -40 | | 85 | ℃ | | 4 |
| Storage temperature | Tstg | -40 | | 125 | ℃ | | 4 |
| PSRR | PSRR | | 40 | | dB | F=1KHz, VIN=VOUT+1V | 4 |
| Output current | IOUT | | 400 | | mA | VIN - VOUT=1V | 4 |
## CAD (KiCad official)
- Symbol: `H7230-1M5R`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `h7230-1m5r-etched.step` / `h7230-1m5r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `h7230-1m5r.step` / `h7230-1m5r.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Siproin Microelectronics datasheet](docs/h7230-1m5r-datasheet.pdf) (None pp, sha256 `a7811815b9ea1f49`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/h7230-1m5r-datasheet.pdf)