component
H7211-30M5R
Public Made by Adomby adom
Shanghai Siproin Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 21d ago |
| viewers | 21d ago |
| h7211-30m5r-etched.glb | 21d ago |
| h7211-30m5r-etched.step | 21d ago |
| h7211-30m5r-hero.glb | 21d ago |
| h7211-30m5r-hero.overlay.json | 21d ago |
| h7211-30m5r.glb | 21d ago |
| h7211-30m5r.kicad_mod | 21d ago |
| h7211-30m5r.kicad_sym | 21d ago |
| h7211-30m5r.lbr | 21d ago |
| h7211-30m5r.step | 21d ago |
| package.json | 21d ago |
| page.json | 21d ago |
| README.md | 21d ago |
H7211-30M5R
Shanghai Siproin Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
H7211-30M5R from Shanghai Siproin Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Voltage input pin; the datasheet specifies an operating input voltage range of 2.0 V to 6.0 V (absolute maximum -0.3 V to 7 V). |
| 2 | VSS | power_in | Ground pin; all datasheet voltages are referenced to this ground. |
| 3 | CE | input | Enable pin; a logic high of 1.5 V to VIN enables the regulator and a logic low of 0.3 V shuts it down, discharging COUT through the internal discharge path. |
| 4 | NC | unconnected | No connection; the datasheet pin table marks this pin as empty (空). |
| 5 | VOUT | power_out | Regulated voltage output; absolute maximum output pin voltage is VIN+0.3 V and output current is 600 mA absolute maximum (300 mA specified output current). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Siproin Microelectronics |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | VOUT | -2 | 2 | % | High output accuracy, printed in features as ±2% (TYP.) | 1 | |
| Nominal output voltage (ordering code 30) | VOUT | 3 | V | Ordering code ①② = 30 | 2 | ||
| Quiescent current | Iss | 30 | 60 | μA | IOUT=0 | 4 | |
| Standby current | ISTBY | 0.1 | μA | CE = VSS | 4 | ||
| Output current | IOUT | 300 | mA | 4 | |||
| Dropout voltage (VOUT 3.0 V) | VDO | 155 | 220 | mV | IOUT=150mA, VOUT=3.0V row | 5 | |
| Load regulation | ΔVOUT | 10 | mV | VIN=VOUT+1V, 1mA≤IOUT≤100mA | 4 | ||
| Line regulation | 0.01 | 0.2 | %/V | IOUT=10mA, VOUT+1V≤VIN≤6V | 4 | ||
| Output voltage temperature coefficient | 100 | ppm | IOUT=10mA, -40≤T≤+85 | 4 | |||
| Short-circuit current | IShort | 100 | mA | VOUT =VSS | 4 | ||
| Input voltage | VIN | 2 | 6 | V | 4 | ||
| Power supply rejection ratio | PSRR | 80 | dB | f = 217Hz, IOUT = 50mA | 4 | ||
| Power supply rejection ratio | PSRR | 75 | dB | f = 1kHz | 4 | ||
| Power supply rejection ratio | PSRR | 70 | dB | f = 10kHz | 4 | ||
| CE pin high-level input voltage | VCE“H” | 1.5 | V | Upper limit printed as VIN | 4 | ||
| CE pin low-level input voltage | VCE“L” | 0.3 | V | 4 | |||
| Output capacitor discharge resistance | RDISCHRG | 80 | Ω | VIN=5V, VOUT=3.0V, VCE=VSS | 4 | ||
| Input voltage (absolute maximum) | VIN | -0.3 | 7 | V | Referenced to ground | 3 | |
| Output voltage (absolute maximum) | VOUT | -0.3 | V | Upper limit printed as VIN+0.3 | 3 | ||
| Output current (absolute maximum) | IOUT | 600 | mA | 3 | |||
| Allowable power dissipation SOT23-5 | PD | 400 | mW | SOT23-5 package, Ta=25℃ unless otherwise stated | 3 | ||
| Operating ambient temperature (absolute maximum) | Ta | -40 | 85 | ℃ | 3 | ||
| Operating junction temperature (absolute maximum) | Tj | -40 | 125 | ℃ | 3 | ||
| Storage temperature | Tstg | -40 | 125 | ℃ | 3 | ||
| Soldering temperature | Tsolder | 260 | ℃ | 10 s | 3 | ||
| ESD HBM | 4 | kV | HBM | 3 | |||
| ESD MM | 200 | V | MM | 3 | |||
| Input voltage (recommended) | VIN | 2 | 6 | V | 3 | ||
| Operating junction temperature (recommended) | Tj | 0 | 125 | ℃ | 3 | ||
| Operating ambient temperature (recommended) | Ta | 0 | 85 | ℃ | 3 |
CAD (KiCad official)
- Symbol:
H7211-30M5R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
h7211-30m5r-etched.step/h7211-30m5r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);h7211-30m5r.step/h7211-30m5r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Siproin Microelectronics datasheet (8 pp, sha256
d3a317332dc5d413, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).