main
Ray
Publish 0.1.0
ab1da46
H7211-18M5R
Shanghai Siproin Microelectronics · Linear Voltage Regulators (LDO) · SOT-23-5
H7211-18M5R from Shanghai Siproin Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Power input pin; the input voltage range is 2.0V to 6.0V, with an absolute maximum of -0.3V to 7V. |
| 2 | Vss | power_in | Ground pin for the regulator. |
| 3 | CE | input | Chip enable pin: drive HIGH (1.5V to VIN) to enable the output, or LOW (max 0.3V) to shut down; shutdown current is 0.1μA max with CE=VSS. |
| 4 | NC | unconnected | No connection; this pin is not connected internally. |
| 5 | Vout | power_out | Regulated output pin; output current is up to 300mA, and the output voltage for this part (code 18) is 1.8V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Siproin Microelectronics |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (absolute maximum) | Vin | -0.3 | 7 | V | 3 | ||
| Output voltage (absolute maximum) | Vout | -0.3 | V | 3 | |||
| Output current (absolute maximum) | Iout | 300 | mA | 3 | |||
| Power dissipation, SOT23-5 | PD | 400 | mW | SOT23-5 package | 3 | ||
| Operating temperature range | Ta | -40 | 85 | ℃ | 3 | ||
| Junction temperature range | Tj | -40 | 125 | ℃ | 3 | ||
| Storage temperature range | Tstg | -40 | 125 | ℃ | 3 | ||
| Welding temperature | Tsolder | 260 | ℃ | 10 s | 3 | ||
| ESD HBM | 4 | kV | HBM | 3 | |||
| ESD MM | 200 | V | MM | 3 | |||
| Output voltage accuracy | -2 | 2 | % | 1 | |||
| Input voltage range | VIN | 2 | 6 | V | 4 | ||
| Quiescent current | Iss | 30 | 60 | μA | Iout=0 | 4 | |
| Load regulation | ΔVout | 10 | mV | VIN=Vout+1V, 1mA≤Iout≤100mA | 4 | ||
| Line regulation | 0.01 | 0.2 | %/V | Iout=10mA, Vout+1V≤Vin≤6V | 4 | ||
| Voltage drop (Vout = 1.8V) | VDO | 230 | 600 | mV | Iout=150mA, Vout=1.8V (voltage-drop table by output voltage) | 5 | |
| CE pin high-level input voltage | VCE“H” | 1.5 | V | CE=HIGH | 4 | ||
| CE pin low-level input voltage | VCE“L” | 0.3 | V | CE=LOW | 4 | ||
| Shutdown current | ISTBY | 0.1 | μA | CE = VSS | 4 | ||
| Output voltage temperature characteristic | 100 | ppm/℃ | Iout=10mA, -40≤T≤+85 | 4 | |||
| Short-circuit current | IShort | 100 | mA | Vout =VSS | 4 | ||
| PSRR at 217Hz | PSRR | 80 | dB | F=217Hz, IOUT = 50mA | 4 | ||
| PSRR at 1kHz | PSRR | 75 | dB | F=1kHz, IOUT = 50mA | 4 | ||
| PSRR at 10kHz | PSRR | 70 | dB | F=10kHz, IOUT = 50mA | 4 | ||
| Output capacitor discharge resistor | RDISCHRG | 80 | Ω | VIN=5V, Vout=3.0V, VCE=VSS | 4 |
CAD (KiCad official)
- Symbol:
H7211-18M5R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
h7211-18m5r-etched.step/h7211-18m5r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);h7211-18m5r.step/h7211-18m5r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Siproin Microelectronics datasheet (9 pp, sha256
b0219dac2623b496, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# H7211-18M5R
**Shanghai Siproin Microelectronics** · Linear Voltage Regulators (LDO) · SOT-23-5
H7211-18M5R from Shanghai Siproin Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Power input pin; the input voltage range is 2.0V to 6.0V, with an absolute maximum of -0.3V to 7V. |
| 2 | Vss | power_in | Ground pin for the regulator. |
| 3 | CE | input | Chip enable pin: drive HIGH (1.5V to VIN) to enable the output, or LOW (max 0.3V) to shut down; shutdown current is 0.1μA max with CE=VSS. |
| 4 | NC | unconnected | No connection; this pin is not connected internally. |
| 5 | Vout | power_out | Regulated output pin; output current is up to 300mA, and the output voltage for this part (code 18) is 1.8V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Siproin Microelectronics |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (absolute maximum) | Vin | -0.3 | | 7 | V | | 3 |
| Output voltage (absolute maximum) | Vout | -0.3 | | | V | | 3 |
| Output current (absolute maximum) | Iout | | | 300 | mA | | 3 |
| Power dissipation, SOT23-5 | PD | | | 400 | mW | SOT23-5 package | 3 |
| Operating temperature range | Ta | -40 | | 85 | ℃ | | 3 |
| Junction temperature range | Tj | -40 | | 125 | ℃ | | 3 |
| Storage temperature range | Tstg | -40 | | 125 | ℃ | | 3 |
| Welding temperature | Tsolder | | | 260 | ℃ | 10 s | 3 |
| ESD HBM | | | | 4 | kV | HBM | 3 |
| ESD MM | | | | 200 | V | MM | 3 |
| Output voltage accuracy | | -2 | | 2 | % | | 1 |
| Input voltage range | VIN | 2 | | 6 | V | | 4 |
| Quiescent current | Iss | | 30 | 60 | μA | Iout=0 | 4 |
| Load regulation | ΔVout | | | 10 | mV | VIN=Vout+1V, 1mA≤Iout≤100mA | 4 |
| Line regulation | | | 0.01 | 0.2 | %/V | Iout=10mA, Vout+1V≤Vin≤6V | 4 |
| Voltage drop (Vout = 1.8V) | VDO | | 230 | 600 | mV | Iout=150mA, Vout=1.8V (voltage-drop table by output voltage) | 5 |
| CE pin high-level input voltage | VCE“H” | 1.5 | | | V | CE=HIGH | 4 |
| CE pin low-level input voltage | VCE“L” | | | 0.3 | V | CE=LOW | 4 |
| Shutdown current | ISTBY | | | 0.1 | μA | CE = VSS | 4 |
| Output voltage temperature characteristic | | | 100 | | ppm/℃ | Iout=10mA, -40≤T≤+85 | 4 |
| Short-circuit current | IShort | | 100 | | mA | Vout =VSS | 4 |
| PSRR at 217Hz | PSRR | | 80 | | dB | F=217Hz, IOUT = 50mA | 4 |
| PSRR at 1kHz | PSRR | | 75 | | dB | F=1kHz, IOUT = 50mA | 4 |
| PSRR at 10kHz | PSRR | | 70 | | dB | F=10kHz, IOUT = 50mA | 4 |
| Output capacitor discharge resistor | RDISCHRG | | 80 | | Ω | VIN=5V, Vout=3.0V, VCE=VSS | 4 |
## CAD (KiCad official)
- Symbol: `H7211-18M5R`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `h7211-18m5r-etched.step` / `h7211-18m5r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `h7211-18m5r.step` / `h7211-18m5r.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Siproin Microelectronics datasheet](docs/h7211-18m5r-datasheet.pdf) (9 pp, sha256 `b0219dac2623b496`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/h7211-18m5r-datasheet.pdf)