main
Ray
Publish 0.1.0
7ed0bc9
H11L3M
onsemi · Optocouplers - Logic Output · DIP-6
H11L3M from onsemi, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE | passive | LED anode input; continuous forward current is limited to 30 mA, and H11L3M turn-on threshold IF(on) is 5.0 mA max. |
| 2 | CATHODE | passive | LED cathode input; reverse voltage is limited to 6 V. |
| 3 | NC | unconnected | Pin 3 has no function shown in the schematic or test circuit. |
| 4 | VO | output | Open-collector Schmitt trigger output that sinks 16 mA at 0.4 V max; allowed range 0 to 16 V (V45) and 50 mA max output current. |
| 5 | GND | power_in | Ground reference for the detector supply and output. |
| 6 | VCC | power_in | Detector supply pin; operating range 3 to 15 V, absolute maximum range 3 to 16 V (V65). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DIP-6 |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Forward Voltage | VF | 1.2 | 1.5 | V | IF = 10 mA | 3 | |
| Input Forward Voltage | VF | 0.75 | V | IF = 0.3 mA | 3 | ||
| Reverse Current | IR | 10 | µA | VR = 3 V | 3 | ||
| Capacitance | CJ | 100 | pF | V = 0, f = 1.0 MHz | 3 | ||
| Operating Voltage Range | VCC | 3 | 15 | V | 3 | ||
| Supply Current (off) | ICC(off) | 1.6 | 5 | mA | IF = 0, VCC = 5 V | 3 | |
| Output Current, High | IOH | 100 | µA | IF = 0, VCC = VO = 15 V | 3 | ||
| Supply Current (on) | ICC(on) | 1.6 | 5 | mA | IF = 10 mA, VCC = 5 V | 3 | |
| Output Voltage, Low | VOL | 0.2 | 0.4 | V | RL = 270 Ω, VCC = 5 V, IF = IF(on) max. | 3 | |
| Turn-On Threshold Current | IF(on) | 5 | mA | RL = 270 Ω, VCC = 5 V, H11L3M | 3 | ||
| Turn-Off Threshold Current | IF(off) | 0.3 | 1 | mA | RL = 270 Ω, VCC = 5 V | 3 | |
| Hysteresis Ratio | IF(off)/IF(on) | 0.5 | 0.75 | 0.9 | RL = 270 Ω, VCC = 5 V | 3 | |
| Turn-On Time | ton | 1 | 4 | µs | RL = 270 Ω, VCC = 5 V, IF = IF(on), TA = 25°C | 3 | |
| Fall Time | tf | 0.1 | µs | RL = 270 Ω, VCC = 5 V, IF = IF(on), TA = 25°C | 3 | ||
| Turn-Off Time | toff | 1.2 | 4 | µs | RL = 270 Ω, VCC = 5 V, IF = IF(on), TA = 25°C | 3 | |
| Rise Time | tr | 0.1 | µs | RL = 270 Ω, VCC = 5 V, IF = IF(on), TA = 25°C | 3 | ||
| Data Rate | 1 | MHz | 3 | ||||
| Input-Output Isolation Voltage | VISO | 4170 | VACRMS | t = 1 Minute | 3 | ||
| Isolation Capacitance | CISO | 0.4 | 0.6 | pF | VI-O = 0 V, f = 1 MHz | 3 | |
| Storage Temperature | TSTG | -40 | 125 | °C | 2 | ||
| Operating Temperature | TOPR | -40 | 85 | °C | 2 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 2 | ||
| Total Device Power Dissipation | PD | 250 | mW | at 25°C, derate 2.94 mW/°C above 25°C | 2 | ||
| Continuous Forward Current | IF | 30 | mA | 2 | |||
| Reverse Voltage | VR | 6 | V | 2 | |||
| Forward Current - Peak | IF(pk) | 100 | mA | 1 s pulse, 300 pps | 2 | ||
| LED Power Dissipation | PD | 60 | mW | 2 | |||
| Detector Power Dissipation | PD | 150 | mW | 2 | |||
| VO Allowed Range | VO | 0 | 16 | V | V45 | 2 | |
| VCC Allowed Range | VCC | 3 | 16 | V | V65 | 2 | |
| Output Current | IO | 50 | mA | I4 | 2 |
CAD (KiCad official)
- Symbol:
H11L3M - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
h11l3m-etched.step/h11l3m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);h11l3m.step/h11l3m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (9 pp, sha256
3307390dbb542b06, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# H11L3M
**onsemi** · Optocouplers - Logic Output · DIP-6
H11L3M from onsemi, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE | passive | LED anode input; continuous forward current is limited to 30 mA, and H11L3M turn-on threshold IF(on) is 5.0 mA max. |
| 2 | CATHODE | passive | LED cathode input; reverse voltage is limited to 6 V. |
| 3 | NC | unconnected | Pin 3 has no function shown in the schematic or test circuit. |
| 4 | VO | output | Open-collector Schmitt trigger output that sinks 16 mA at 0.4 V max; allowed range 0 to 16 V (V45) and 50 mA max output current. |
| 5 | GND | power_in | Ground reference for the detector supply and output. |
| 6 | VCC | power_in | Detector supply pin; operating range 3 to 15 V, absolute maximum range 3 to 16 V (V65). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DIP-6 |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Forward Voltage | VF | | 1.2 | 1.5 | V | IF = 10 mA | 3 |
| Input Forward Voltage | VF | 0.75 | | | V | IF = 0.3 mA | 3 |
| Reverse Current | IR | | | 10 | µA | VR = 3 V | 3 |
| Capacitance | CJ | | | 100 | pF | V = 0, f = 1.0 MHz | 3 |
| Operating Voltage Range | VCC | 3 | | 15 | V | | 3 |
| Supply Current (off) | ICC(off) | | 1.6 | 5 | mA | IF = 0, VCC = 5 V | 3 |
| Output Current, High | IOH | | | 100 | µA | IF = 0, VCC = VO = 15 V | 3 |
| Supply Current (on) | ICC(on) | | 1.6 | 5 | mA | IF = 10 mA, VCC = 5 V | 3 |
| Output Voltage, Low | VOL | | 0.2 | 0.4 | V | RL = 270 Ω, VCC = 5 V, IF = IF(on) max. | 3 |
| Turn-On Threshold Current | IF(on) | | | 5 | mA | RL = 270 Ω, VCC = 5 V, H11L3M | 3 |
| Turn-Off Threshold Current | IF(off) | 0.3 | | 1 | mA | RL = 270 Ω, VCC = 5 V | 3 |
| Hysteresis Ratio | IF(off)/IF(on) | 0.5 | 0.75 | 0.9 | | RL = 270 Ω, VCC = 5 V | 3 |
| Turn-On Time | ton | | 1 | 4 | µs | RL = 270 Ω, VCC = 5 V, IF = IF(on), TA = 25°C | 3 |
| Fall Time | tf | | 0.1 | | µs | RL = 270 Ω, VCC = 5 V, IF = IF(on), TA = 25°C | 3 |
| Turn-Off Time | toff | | 1.2 | 4 | µs | RL = 270 Ω, VCC = 5 V, IF = IF(on), TA = 25°C | 3 |
| Rise Time | tr | | 0.1 | | µs | RL = 270 Ω, VCC = 5 V, IF = IF(on), TA = 25°C | 3 |
| Data Rate | | | 1 | | MHz | | 3 |
| Input-Output Isolation Voltage | VISO | 4170 | | | VACRMS | t = 1 Minute | 3 |
| Isolation Capacitance | CISO | | 0.4 | 0.6 | pF | VI-O = 0 V, f = 1 MHz | 3 |
| Storage Temperature | TSTG | -40 | | 125 | °C | | 2 |
| Operating Temperature | TOPR | -40 | | 85 | °C | | 2 |
| Junction Temperature | TJ | -40 | | 125 | °C | | 2 |
| Total Device Power Dissipation | PD | | | 250 | mW | at 25°C, derate 2.94 mW/°C above 25°C | 2 |
| Continuous Forward Current | IF | | | 30 | mA | | 2 |
| Reverse Voltage | VR | | | 6 | V | | 2 |
| Forward Current - Peak | IF(pk) | | | 100 | mA | 1 s pulse, 300 pps | 2 |
| LED Power Dissipation | PD | | | 60 | mW | | 2 |
| Detector Power Dissipation | PD | | | 150 | mW | | 2 |
| VO Allowed Range | VO | 0 | | 16 | V | V45 | 2 |
| VCC Allowed Range | VCC | 3 | | 16 | V | V65 | 2 |
| Output Current | IO | | | 50 | mA | I4 | 2 |
## CAD (KiCad official)
- Symbol: `H11L3M`
- Footprint: `Package_DIP:DIP-6_W7.62mm`
- 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files: `h11l3m-etched.step` / `h11l3m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `h11l3m.step` / `h11l3m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/h11l3m-d.pdf) (9 pp, sha256 `3307390dbb542b06`, retrieved 2026-10-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/h11l3m-datasheet.pdf)