main
Ray
Publish 0.1.0
b2dfba0
GZP6899A100KPP50T
Sencoch Semiconductor · Pressure Sensors · SOP-8
GZP6899A100KPP50T from Sencoch Semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connect; must not have any electrical connection, otherwise product function may fail. |
| 2 | GND | power_in | Ground; place a 0.1uF capacitor between VDD and GND. |
| 3 | N/C | unconnected | No connect; must not have any electrical connection, otherwise product function may fail. |
| 4 | N/C | unconnected | No connect; must not have any electrical connection, otherwise product function may fail. |
| 5 | VOUT | output | Analog voltage output, 0.5 to 4.5 V (customizable) at 5 V supply, with output current load up to 5 mA and short-circuit current limit 15 to 25 mA. |
| 6 | VDD | power_in | Supply input, 3.3 to 5.5 V (5±0.25 V nominal), with no reverse polarity protection and overload voltage of 6.5 Vdc possibly damaging the chip. |
| 7 | N/C | unconnected | No connect; must not have any electrical connection, otherwise product function may fail. |
| 8 | N/C | unconnected | No connect; must not have any electrical connection, otherwise product function may fail. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sencoch Semiconductor |
| Package | SOP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | 3.3 | 5 | 5.5 | V | typical per factory configuration | 5 | |
| Operating current | 1700 | uA | @25℃ | 5 | |||
| PSRR | PSRR | 60 | dB | 5 | |||
| Output load current | 5 | mA | 5 | ||||
| Input common-mode rejection ratio | 80 | 110 | dB | 5 | |||
| Short-circuit current limit | 15 | 20 | 25 | mA | 5 | ||
| Upper clamp voltage | 1 | VDD | min printed as 3/4 VDD (0.75 not given numerically in table) | 5 | |||
| Lower clamp voltage | 0 | VDD | typ printed as 1/4 VDD | 5 | |||
| Accuracy | -1 | 1 | %Span | 0~70℃ output error (linearity, repeatability, hysteresis) | 5 | ||
| Zero temperature drift | -0.03 | 0.03 | %FS/℃ | 5 | |||
| Full-scale temperature drift | -0.03 | 0.03 | %FS/℃ | 5 | |||
| Operating temperature | -20 | 100 | ℃ | 5 | |||
| Storage temperature | -30 | 150 | ℃ | 5 | |||
| Compensated temperature | 0 | 60 | ℃ | customizable | 5 | ||
| Output signal | 0.5 | 4.5 | V | customizable | 5 | ||
| Filter capacitor | 100 | nF | 5 |
CAD (KiCad official)
- Symbol:
GZP6899A100KPP50T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gzp6899a100kpp50t-etched.step/gzp6899a100kpp50t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gzp6899a100kpp50t.step/gzp6899a100kpp50t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sencoch Semiconductor datasheet (13 pp, sha256
f57a67f2656de6d3, retrieved 2026-10-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GZP6899A100KPP50T
**Sencoch Semiconductor** · Pressure Sensors · SOP-8
GZP6899A100KPP50T from Sencoch Semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connect; must not have any electrical connection, otherwise product function may fail. |
| 2 | GND | power_in | Ground; place a 0.1uF capacitor between VDD and GND. |
| 3 | N/C | unconnected | No connect; must not have any electrical connection, otherwise product function may fail. |
| 4 | N/C | unconnected | No connect; must not have any electrical connection, otherwise product function may fail. |
| 5 | VOUT | output | Analog voltage output, 0.5 to 4.5 V (customizable) at 5 V supply, with output current load up to 5 mA and short-circuit current limit 15 to 25 mA. |
| 6 | VDD | power_in | Supply input, 3.3 to 5.5 V (5±0.25 V nominal), with no reverse polarity protection and overload voltage of 6.5 Vdc possibly damaging the chip. |
| 7 | N/C | unconnected | No connect; must not have any electrical connection, otherwise product function may fail. |
| 8 | N/C | unconnected | No connect; must not have any electrical connection, otherwise product function may fail. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sencoch Semiconductor |
| Package | SOP-8 |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | | 3.3 | 5 | 5.5 | V | typical per factory configuration | 5 |
| Operating current | | | | 1700 | uA | @25℃ | 5 |
| PSRR | PSRR | 60 | | | dB | | 5 |
| Output load current | | | | 5 | mA | | 5 |
| Input common-mode rejection ratio | | 80 | 110 | | dB | | 5 |
| Short-circuit current limit | | 15 | 20 | 25 | mA | | 5 |
| Upper clamp voltage | | | 1 | | VDD | min printed as 3/4 VDD (0.75 not given numerically in table) | 5 |
| Lower clamp voltage | | 0 | | | VDD | typ printed as 1/4 VDD | 5 |
| Accuracy | | -1 | | 1 | %Span | 0~70℃ output error (linearity, repeatability, hysteresis) | 5 |
| Zero temperature drift | | -0.03 | | 0.03 | %FS/℃ | | 5 |
| Full-scale temperature drift | | -0.03 | | 0.03 | %FS/℃ | | 5 |
| Operating temperature | | -20 | | 100 | ℃ | | 5 |
| Storage temperature | | -30 | | 150 | ℃ | | 5 |
| Compensated temperature | | 0 | | 60 | ℃ | customizable | 5 |
| Output signal | | 0.5 | | 4.5 | V | customizable | 5 |
| Filter capacitor | | | 100 | | nF | | 5 |
## CAD (KiCad official)
- Symbol: `GZP6899A100KPP50T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `gzp6899a100kpp50t-etched.step` / `gzp6899a100kpp50t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gzp6899a100kpp50t.step` / `gzp6899a100kpp50t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Sencoch Semiconductor datasheet](docs/gzp6899a100kpp50t-datasheet.pdf) (13 pp, sha256 `f57a67f2656de6d3`, retrieved 2026-10-26, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gzp6899a100kpp50t-datasheet.pdf)