main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers gzp6899a010kpp50t: viewers · Ray
gzp6899a010kpp50t-etched.glb Publish 0.1.0 · Ray
gzp6899a010kpp50t-etched.step gzp6899a010kpp50t: factory component page (tier=lcsc) · Ray
gzp6899a010kpp50t-hero.glb gzp6899a010kpp50t: hero GLB from the etched model (keeps the MPN mark) · Ray
gzp6899a010kpp50t-hero.overlay.json Publish 0.1.0 · Ray
gzp6899a010kpp50t.glb Publish 0.1.0 · Ray
gzp6899a010kpp50t.kicad_mod Publish 0.1.0 · Ray
gzp6899a010kpp50t.kicad_sym Publish 0.1.0 · Ray
gzp6899a010kpp50t.lbr Publish 0.1.0 · Ray
gzp6899a010kpp50t.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

GZP6899A010KPP50T

Sencoch Semiconductor · Pressure Sensors · SOP-8

GZP6899A010KPP50T from Sencoch Semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 N/C unconnected Not connected; the datasheet states that NC pins must have no electrical connection, as this may cause product function failure.
2 GND power_in Ground reference for the sensor; the device has no reverse-polarity protection, so supply polarity must be observed during assembly, and a 0.1 µF capacitor should be placed between VDD and GND.
3 N/C unconnected Not connected; the datasheet states that NC pins must have no electrical connection, as this may cause product function failure.
4 N/C unconnected Not connected; the datasheet states that NC pins must have no electrical connection, as this may cause product function failure.
5 VOUT output Calibrated, temperature-compensated analog voltage output of 0.5-4.5 V (customizable), with a load current limit of 5 mA and a short-circuit current limit of 15-25 mA.
6 VDD power_in Supply input rated 3.3-5.5 V (typical 5 V, ±0.25 V in the performance specification); an overvoltage of 6.5 Vdc may destroy the circuit chip, and a 0.1 µF capacitor should be connected between VDD and GND.
7 N/C unconnected Not connected; the datasheet states that NC pins must have no electrical connection, as this may cause product function failure.
8 N/C unconnected Not connected; the datasheet states that NC pins must have no electrical connection, as this may cause product function failure.

Key specifications

Parameter Value
Manufacturer Sencoch Semiconductor
Package SOP-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
供电电压 3.3 5 5.5 V 典型值参照出厂配置 5
输出信号 0.5 4.5 V 可定制 5
精度 -1 1 %Span 0~70℃输出误差(线性、重复性、迟滞) 5
零点温度漂移 -0.03 0.03 %FS/℃ 5
满程温度漂移 -0.03 0.03 %FS/℃ 5
高压端过载压力 Rated 4 ×(量程≤60kPa) 量程≤60kPa;其他量程见表1为2.5×/1.5× 5
高压端破坏压力 5 ×(量程≤60kPa) 量程≤60kPa;其他量程见表1为3×/2× 5
补偿温度 0 60 ℃ 可定制 5
工作温度 -20 100 ℃ 5
贮存温度 -30 150 ℃ 5
工作电流 1700 uA @25℃ 5
滤波电容 100 nF 5
PSRR 60 dB 5
输出电流负载 5 mA 5
输入共模信号抑制比 80 110 dB 5
短路电流限制 15 20 25 mA 5
过载电压 6.5 Vdc 可能烧毁电路芯片 6
低压端最大承受压力 500 kPa 4
压力量程(0~10 kPa) 0 10 kPa 表7 型号列 GZP6899A010KPP50K(同基型) 8

CAD (KiCad official)

  • Symbol: GZP6899A010KPP50T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: gzp6899a010kpp50t-etched.step / gzp6899a010kpp50t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gzp6899a010kpp50t.step / gzp6899a010kpp50t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sencoch Semiconductor datasheet (13 pp, sha256 f57a67f2656de6d3, retrieved 2026-10-29, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF