main
Ray
Publish 0.1.0
a0df4b4
GZP6857A040KPP33Z
Sencoch Semiconductor · Pressure Sensors · DIP-6
GZP6857A040KPP33Z from Sencoch Semiconductor, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connection; must not have any electrical connection, otherwise product function may fail. |
| 2 | VDD | power_in | Supply voltage, 3.0~5.5V (5±0.25V DC nominal); no reverse-polarity protection, overvoltage of 6.5Vdc may burn the chip, and a 0.1uF capacitor is required between VDD and GND. |
| 3 | OUT | output | Analog voltage output, 0.5~4.5V at 5V supply, clamped between 1/4 VDD and 3/4 VDD, with short-circuit current limit of 15/20/25 mA (min/typ/max). |
| 4 | N/C | unconnected | No connection; must not have any electrical connection, otherwise product function may fail. |
| 5 | N/C | unconnected | No connection; must not have any electrical connection, otherwise product function may fail. |
| 6 | GND | power_in | Ground; a 0.1uF capacitor must be placed between VDD and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sencoch Semiconductor |
| Package | DIP-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Accuracy (0~70°C, linearity+repeatability+hysteresis) | -1 | 1 | %Span | 0~70℃ output error | 5 | ||
| Zero temperature drift | -0.03 | 0.03 | %FS/℃ | 5 | |||
| Full-scale temperature drift | -0.03 | 0.03 | %FS/℃ | 5 | |||
| Short-circuit current limit | 15 | 20 | 25 | mA | 5 | ||
| Input common-mode rejection ratio | 80 | 110 | dB | 5 | |||
| Supply voltage | 5.5 | V | 5 | ||||
| Operating temperature | -20 | 100 | ℃ | 5 | |||
| Storage temperature | -30 | 150 | ℃ | 5 | |||
| Overload voltage (may burn chip) | 6.5 | Vdc | 过载电压(6.5Vdc)可能烧毁电路芯片 | 6 | |||
| Operating current | 1700 | uA | 25℃ | 5 | |||
| Filter capacitor | 100 | nF | 5 | ||||
| PSRR | PSRR | 60 | dB | 5 | |||
| Output current load | 5 | mA | 5 | ||||
| Upper clamp voltage | 1 | VDD | 3/4 to 1 VDD as printed | 5 | |||
| Lower clamp voltage | 0 | VDD | 0 to 1/4 VDD as printed | 5 | |||
| Output signal | 0.5 | 4.5 | V | 0.5~4.5 (customizable) | 5 | ||
| Compensation temperature | 0 | 60 | ℃ | 0~60 (customizable) | 5 |
CAD (KiCad official)
- Symbol:
GZP6857A040KPP33Z - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
gzp6857a040kpp33z-etched.step/gzp6857a040kpp33z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gzp6857a040kpp33z.step/gzp6857a040kpp33z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sencoch Semiconductor datasheet (13 pp, sha256
9fe580107499ec2c, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GZP6857A040KPP33Z
**Sencoch Semiconductor** · Pressure Sensors · DIP-6
GZP6857A040KPP33Z from Sencoch Semiconductor, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connection; must not have any electrical connection, otherwise product function may fail. |
| 2 | VDD | power_in | Supply voltage, 3.0~5.5V (5±0.25V DC nominal); no reverse-polarity protection, overvoltage of 6.5Vdc may burn the chip, and a 0.1uF capacitor is required between VDD and GND. |
| 3 | OUT | output | Analog voltage output, 0.5~4.5V at 5V supply, clamped between 1/4 VDD and 3/4 VDD, with short-circuit current limit of 15/20/25 mA (min/typ/max). |
| 4 | N/C | unconnected | No connection; must not have any electrical connection, otherwise product function may fail. |
| 5 | N/C | unconnected | No connection; must not have any electrical connection, otherwise product function may fail. |
| 6 | GND | power_in | Ground; a 0.1uF capacitor must be placed between VDD and GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sencoch Semiconductor |
| Package | DIP-6 |
| Category | Sensors |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Accuracy (0~70°C, linearity+repeatability+hysteresis) | | -1 | | 1 | %Span | 0~70℃ output error | 5 |
| Zero temperature drift | | -0.03 | | 0.03 | %FS/℃ | | 5 |
| Full-scale temperature drift | | -0.03 | | 0.03 | %FS/℃ | | 5 |
| Short-circuit current limit | | 15 | 20 | 25 | mA | | 5 |
| Input common-mode rejection ratio | | 80 | 110 | | dB | | 5 |
| Supply voltage | | | | 5.5 | V | | 5 |
| Operating temperature | | -20 | | 100 | ℃ | | 5 |
| Storage temperature | | -30 | | 150 | ℃ | | 5 |
| Overload voltage (may burn chip) | | | | 6.5 | Vdc | 过载电压(6.5Vdc)可能烧毁电路芯片 | 6 |
| Operating current | | | 1700 | | uA | 25℃ | 5 |
| Filter capacitor | | | 100 | | nF | | 5 |
| PSRR | PSRR | | 60 | | dB | | 5 |
| Output current load | | | 5 | | mA | | 5 |
| Upper clamp voltage | | | 1 | | VDD | 3/4 to 1 VDD as printed | 5 |
| Lower clamp voltage | | | 0 | | VDD | 0 to 1/4 VDD as printed | 5 |
| Output signal | | 0.5 | | 4.5 | V | 0.5~4.5 (customizable) | 5 |
| Compensation temperature | | 0 | | 60 | ℃ | 0~60 (customizable) | 5 |
## CAD (KiCad official)
- Symbol: `GZP6857A040KPP33Z`
- Footprint: `Package_DIP:DIP-6_W7.62mm`
- 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files: `gzp6857a040kpp33z-etched.step` / `gzp6857a040kpp33z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gzp6857a040kpp33z.step` / `gzp6857a040kpp33z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Sencoch Semiconductor datasheet](docs/gzp6857a040kpp33z-datasheet.pdf) (13 pp, sha256 `9fe580107499ec2c`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gzp6857a040kpp33z-datasheet.pdf)