3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGZP6847A101KPN50K
Sencoch Semiconductor · Pressure Sensors · DIP-6
GZP6847A101KPN50K from Sencoch Semiconductor, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Pin 1 is listed as 无定义 (undefined) in the electrical connection table, so it is not used. |
| 2 | VDD | power_in | Supply pin for the 3.0-5.5 V supply stated in the features; a 0.1 µF capacitor should be placed between VDD and GND, and an overload of 6.5 Vdc may destroy the circuit chip. |
| 3 | GND | power_in | Ground pin; the datasheet recommends a 0.1 µF capacitor between VDD and GND and notes the product has no reverse-polarity protection. |
| 4 | VDD | power_in | Second supply pin (VDD), with the same 3.0-5.5 V supply and 6.5 Vdc overload limit as pin 2. |
| 5 | OUT | output | Pressure signal output, 0.5-4.5 V (customizable) per the output specification, with a stated output current load of 5 mA. |
| 6 | GND | power_in | Second ground pin (GND), connected in the same way as pin 3. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sencoch Semiconductor |
| Package | DIP-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (feature list, 3.0~5.5 V supply) | 3 | 5.5 | V | 供电 3.0~5.5V per 产品特点 | 4 | ||
| Supply voltage nominal with tolerance (5±0.25 V DC) | VDD | -0.25 | 5 | 0.25 | V | 供电电源 (5±0.25) V DC; reference 25℃ | 4 |
| 供电电压 (table row, 典型值参照出厂配置) | 5.5 | V | 典型值参照出厂配置 | 5 | |||
| 工作电流 (operating current) | 1700 | uA | @25℃ | 5 | |||
| PSRR | 60 | dB | 5 | ||||
| 输出电流负载 (output load current) | 5 | mA | 5 | ||||
| 输入共模信号抑制比 (CMRR) | 80 | 110 | dB | 5 | |||
| 短路电流限制 (short-circuit current limit) | 15 | 20 | 25 | mA | 5 | ||
| 精度 (accuracy, output error) | -1 | 1 | %Span | 0~70℃ output error; comprises linearity, repeatability, hysteresis | 5 | ||
| 零点温度漂移 (zero-point temperature drift) | -0.03 | 0.03 | %FS/℃ | 5 | |||
| 满量程温度漂移 (full-scale temperature drift) | -0.03 | 0.03 | %FS/℃ | 5 | |||
| 输出信号 (output signal) | 0.5 | 4.5 | V | 0.5~4.5 V, customizable (standard voltage output) | 5 | ||
| 量程 (pressure range, this MPN) | -100 | 0 | kPa | GZP6847A101KPN50K: -100~0 kPa gauge (selection table) | 8 | ||
| 过载压力 Rated (overload, 60kPa<量程≤200kPa) | 2.5 | × | Rated; 60kPa<量程≤200kPa (100 kPa span for this MPN) | 5 | |||
| 破坏压力 (burst pressure, 60kPa<量程≤200kPa) | 3 | × | 60kPa<量程≤200kPa (100 kPa span for this MPN) | 5 | |||
| 补偿温度 (compensated temperature) | 0 | 60 | ℃ | 补偿温度 0~60 (可定制) | 5 | ||
| 工作温度 (operating temperature) | -20 | 100 | ℃ | 5 | |||
| 贮存温度 (storage temperature) | -30 | 150 | ℃ | 5 | |||
| 过载电压 (overvoltage) | 6.5 | V | 过载电压 6.5Vdc may burn out the circuit chip | 6 |
CAD (KiCad official)
- Symbol:
GZP6847A101KPN50K - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
gzp6847a101kpn50k-etched.step/gzp6847a101kpn50k-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gzp6847a101kpn50k.step/gzp6847a101kpn50k.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sencoch Semiconductor datasheet (13 pp, sha256
6faba1d2ed07c8c4, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).