main
Ray
Publish 0.1.0
e1d3387
GXTR304Q
GXCAS · Temperature Sensors · QFN-16(3x3)
GXTR304Q from GXCAS, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection; may be left floating or tied to supply or ground. |
| 2 | NC | unconnected | No connection; may be left floating or tied to supply or ground. |
| 3 | D4+ | input | Positive input of remote temperature channel 4; connect to D- when the channel is unused. |
| 4 | D3+ | input | Positive input of remote temperature channel 3; connect to D- when the channel is unused. |
| 5 | D2+ | input | Positive input of remote temperature channel 2; connect to D- when the channel is unused. |
| 6 | D1+ | input | Positive input of remote temperature channel 1; connect to D- when the channel is unused. |
| 7 | D- | input | Common negative input of remote temperature channels 1 to 4. |
| 8 | GND | power_in | Chip ground. |
| 9 | ADD | input | I2C slave address select; connect to SDA, SCL, VDD or GND. |
| 10 | THERM | output | First over-temperature alert, active low, open-drain output; needs a pull-up resistor to a 1.6 to 5.5V supply. |
| 11 | THERM2 | output | Second over-temperature alert, active low, open-drain output; needs a pull-up resistor to a 1.6 to 5.5V supply. |
| 12 | SDA | bidirectional | I2C serial data, open-drain; needs a pull-up resistor to a 1.6 to 5.5V supply. |
| 13 | SCL | input | I2C serial clock, open-drain; needs a pull-up resistor to a 1.6 to 5.5V supply. |
| 14 | VDD | power_in | Chip power supply, 2.7 to 5.5V. |
| 15 | NC | unconnected | No connection; may be left floating or tied to supply or ground. |
| 16 | NC | unconnected | No connection; may be left floating or tied to supply or ground. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GXCAS |
| Package | QFN-16(3x3) |
| Category | Sensors |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2.7 | 3.3 | 5.5 | V | 5 | |
| Operating temperature range | -50 | 150 | °C | 5 | |||
| Supply voltage | VDD | -0.3 | 6 | V | 5 | ||
| THERM, THERM2, SCL, SDA, ADD pin voltage | -0.3 | 6 | V | 5 | |||
| D1+ to D4+ input voltage | -0.3 | V | ((V+)+0.3) and ≤6 and ≤4 as printed | 5 | |||
| D- voltage | -0.3 | 0.3 | V | 5 | |||
| Operating range | -55 | 160 | °C | 5 | |||
| Junction temperature | 150 | °C | 5 | ||||
| Storage temperature | -60 | 150 | °C | 5 | |||
| ESD HBM | VESD | -2500 | 2500 | V | HBM per ANSI/ESDA/JEDEC JS-001 | 5 | |
| ESD MM | VESD | 300 | V | MM per JEDEC-STD | 5 | ||
| Latch-up | -200 | 200 | mA | Per JESD78F, Class IA | 5 | ||
| Local channel temperature accuracy | -1 | 0.5 | 1 | °C | TL = -40 ~ +125°C, VDD = 2.7 ~ 5.5V | 6 | |
| Remote channel accuracy | -1 | 0.5 | 1 | °C | TL = 0 ~ +80°C, TR = -40 ~ +125°C, VDD = 2.7 ~ 5.5V | 6 | |
| Remote channel accuracy | -1.5 | 1 | 1.5 | °C | TL = -40 ~ +125°C, TR = -40 ~ +125°C, VDD = 2.7 ~ 5.5V | 6 | |
| Local channel supply sensitivity | -0.2 | 0.05 | 0.2 | °C/V | VDD = 2.7 ~ 5.5V | 6 | |
| Remote channel supply sensitivity | -0.3 | 0.1 | 0.3 | °C/V | VDD = 2.7 ~ 5.5V | 6 | |
| Conversion time | 16 | 17 | ms | single channel | 6 | ||
| Bus frequency fast mode | 0.001 | 0.4 | MHz | 6 | |||
| Bus frequency high-speed mode | 0.001 | 2.5 | MHz | 6 | |||
| Supply operating voltage | VDD | 2.7 | 3.3 | 5.5 | V | 6 | |
| Resolution | 0.0078125 | °C | 16 bits | 6 | |||
| Remote probe bias current High | 120 | μA | High | 6 | |||
| Remote probe bias current Medium | 45 | μA | Medium | 6 | |||
| Remote probe bias current Low | 7.5 | μA | Low | 6 | |||
| Remote probe ideal η | 1.008 | 6 | |||||
| Quiescent current, local channel conversion | IQ | 180 | μA | local channel continuous conversion | 6 | ||
| Quiescent current, remote channel conversion | IQ | 360 | μA | remote channel continuous conversion | 6 | ||
| Quiescent current, idle mode | IQ | 20 | μA | idle mode | 6 | ||
| Quiescent current, shutdown mode | IQ | 1.2 | μA | shutdown mode | 6 |
CAD (KiCad official)
- Symbol:
GXTR304Q - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
gxtr304q-etched.step/gxtr304q-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gxtr304q.step/gxtr304q.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GXCAS datasheet (27 pp, sha256
0b70258b3c4f16de, retrieved 2026-10-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GXTR304Q
**GXCAS** · Temperature Sensors · QFN-16(3x3)
GXTR304Q from GXCAS, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection; may be left floating or tied to supply or ground. |
| 2 | NC | unconnected | No connection; may be left floating or tied to supply or ground. |
| 3 | D4+ | input | Positive input of remote temperature channel 4; connect to D- when the channel is unused. |
| 4 | D3+ | input | Positive input of remote temperature channel 3; connect to D- when the channel is unused. |
| 5 | D2+ | input | Positive input of remote temperature channel 2; connect to D- when the channel is unused. |
| 6 | D1+ | input | Positive input of remote temperature channel 1; connect to D- when the channel is unused. |
| 7 | D- | input | Common negative input of remote temperature channels 1 to 4. |
| 8 | GND | power_in | Chip ground. |
| 9 | ADD | input | I2C slave address select; connect to SDA, SCL, VDD or GND. |
| 10 | THERM | output | First over-temperature alert, active low, open-drain output; needs a pull-up resistor to a 1.6 to 5.5V supply. |
| 11 | THERM2 | output | Second over-temperature alert, active low, open-drain output; needs a pull-up resistor to a 1.6 to 5.5V supply. |
| 12 | SDA | bidirectional | I2C serial data, open-drain; needs a pull-up resistor to a 1.6 to 5.5V supply. |
| 13 | SCL | input | I2C serial clock, open-drain; needs a pull-up resistor to a 1.6 to 5.5V supply. |
| 14 | VDD | power_in | Chip power supply, 2.7 to 5.5V. |
| 15 | NC | unconnected | No connection; may be left floating or tied to supply or ground. |
| 16 | NC | unconnected | No connection; may be left floating or tied to supply or ground. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GXCAS |
| Package | QFN-16(3x3) |
| Category | Sensors |
| Pins | 17 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2.7 | 3.3 | 5.5 | V | | 5 |
| Operating temperature range | | -50 | | 150 | °C | | 5 |
| Supply voltage | VDD | -0.3 | | 6 | V | | 5 |
| THERM, THERM2, SCL, SDA, ADD pin voltage | | -0.3 | | 6 | V | | 5 |
| D1+ to D4+ input voltage | | -0.3 | | | V | ((V+)+0.3) and ≤6 and ≤4 as printed | 5 |
| D- voltage | | -0.3 | | 0.3 | V | | 5 |
| Operating range | | -55 | | 160 | °C | | 5 |
| Junction temperature | | | | 150 | °C | | 5 |
| Storage temperature | | -60 | | 150 | °C | | 5 |
| ESD HBM | VESD | -2500 | | 2500 | V | HBM per ANSI/ESDA/JEDEC JS-001 | 5 |
| ESD MM | VESD | | 300 | | V | MM per JEDEC-STD | 5 |
| Latch-up | | -200 | | 200 | mA | Per JESD78F, Class IA | 5 |
| Local channel temperature accuracy | | -1 | 0.5 | 1 | °C | TL = -40 ~ +125°C, VDD = 2.7 ~ 5.5V | 6 |
| Remote channel accuracy | | -1 | 0.5 | 1 | °C | TL = 0 ~ +80°C, TR = -40 ~ +125°C, VDD = 2.7 ~ 5.5V | 6 |
| Remote channel accuracy | | -1.5 | 1 | 1.5 | °C | TL = -40 ~ +125°C, TR = -40 ~ +125°C, VDD = 2.7 ~ 5.5V | 6 |
| Local channel supply sensitivity | | -0.2 | 0.05 | 0.2 | °C/V | VDD = 2.7 ~ 5.5V | 6 |
| Remote channel supply sensitivity | | -0.3 | 0.1 | 0.3 | °C/V | VDD = 2.7 ~ 5.5V | 6 |
| Conversion time | | | 16 | 17 | ms | single channel | 6 |
| Bus frequency fast mode | | 0.001 | | 0.4 | MHz | | 6 |
| Bus frequency high-speed mode | | 0.001 | | 2.5 | MHz | | 6 |
| Supply operating voltage | VDD | 2.7 | 3.3 | 5.5 | V | | 6 |
| Resolution | | | 0.0078125 | | °C | 16 bits | 6 |
| Remote probe bias current High | | | 120 | | μA | High | 6 |
| Remote probe bias current Medium | | | 45 | | μA | Medium | 6 |
| Remote probe bias current Low | | | 7.5 | | μA | Low | 6 |
| Remote probe ideal η | | | 1.008 | | | | 6 |
| Quiescent current, local channel conversion | IQ | | 180 | | μA | local channel continuous conversion | 6 |
| Quiescent current, remote channel conversion | IQ | | 360 | | μA | remote channel continuous conversion | 6 |
| Quiescent current, idle mode | IQ | | 20 | | μA | idle mode | 6 |
| Quiescent current, shutdown mode | IQ | | 1.2 | | μA | shutdown mode | 6 |
## CAD (KiCad official)
- Symbol: `GXTR304Q`
- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`
- 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files: `gxtr304q-etched.step` / `gxtr304q-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gxtr304q.step` / `gxtr304q.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [GXCAS datasheet](docs/gxtr304q-datasheet.pdf) (27 pp, sha256 `0b70258b3c4f16de`, retrieved 2026-10-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gxtr304q-datasheet.pdf)