component
GX36Z
Public Made by Adomby adom
GXCAS Temperature Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
GX36Z
GXCAS · Temperature Sensors · SOIC-8
GX36Z from GXCAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vout | output | Analog voltage output that gives 750 mV at 25°C with a scale factor of 10 mV/°C, with output load current specified from 0 to 50 uA. |
| 2 | NC | unconnected | No internal connection; the datasheet recommends making no electrical connection to this pin. |
| 3 | NC | unconnected | No internal connection; the datasheet recommends making no electrical connection to this pin. |
| 4 | GND | power_in | Ground pin for the sensor; the device supply range is referenced to this pin. |
| 5 | /SHUTDOWN | input | Chip enable pin; if shutdown is not needed it should be connected to +Vs, and shutdown reduces supply current below 0.5 uA. |
| 6 | NC | unconnected | No internal connection; the datasheet recommends making no electrical connection to this pin. |
| 7 | NC | unconnected | No internal connection; the datasheet recommends making no electrical connection to this pin. |
| 8 | +Vs | power_in | Single supply input with a range of 2.7 V to 5.5 V, with a 0.1 uF ceramic bypass capacitor placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GXCAS |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | +Vs | 6 | V | 3 | |||
| Operating range | -40 | 150 | °C | 3 | |||
| Junction temperature | 160 | °C | 3 | ||||
| Storage temperature | -60 | 160 | °C | 3 | |||
| Supply voltage | V+ | 2.7 | 3.3 | 5.5 | V | 3 | |
| Operating temperature range | TA | -40 | 125 | °C | 3 | ||
| Supply voltage range | 2.7 | 5.5 | V | 4 | |||
| Supply current, normal operation | 40 | uA | 正常工作 | 4 | |||
| Supply current, shutdown | 0.5 | uA | 关断 | 4 | |||
| Temperature range | -40 | 125 | °C | 4 | |||
| Accuracy (temperature error) | 1 | 2 | °C | +25°C, +Vs = 3.3V | 4 | ||
| Accuracy (temperature error) | 1 | 3 | °C | 0°C to +70°C, +VS = 1.8V | 4 | ||
| Accuracy (temperature error) | 2 | 3 | °C | -40°C to +125°C | 4 | ||
| Supply voltage sensitivity | 20 | 100 | m°C/V | TA=25°C, 3.0V<+Vs<5.5V | 4 | ||
| Scale factor | 10 | mV/°C | −40°C ≤ TA ≤ +125°C | 4 | |||
| Load regulation | 8 | 30 | m°C/uA | −40°C ≤ TA ≤ +105°C | 4 | ||
| Load regulation | 70 | m°C/uA | 105°C ≤ TA ≤ +125°C | 4 | |||
| Linearity | 0.5 | °C | 4 | ||||
| Long-term stability | 0.4 | °C | 4 | ||||
| Output voltage | VOUT | 750 | mV | A=25°C | 4 | ||
| Output load current | 0 | 50 | uA | 4 | |||
| Short-circuit current | 550 | uA | 4 | ||||
| Capacitive load drive | 1000 | 10000 | pF | 4 | |||
| Device turn-on time | 0.5 | 1 | ms | Output within ±1°C, 100 kΩ//100 pF load | 4 |
CAD (KiCad official)
- Symbol:
GX36Z - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
gx36z-etched.step/gx36z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gx36z.step/gx36z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GXCAS datasheet (14 pp, sha256
bc1824beadf80e7e, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GX36Z
**GXCAS** · Temperature Sensors · SOIC-8
GX36Z from GXCAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vout | output | Analog voltage output that gives 750 mV at 25°C with a scale factor of 10 mV/°C, with output load current specified from 0 to 50 uA. |
| 2 | NC | unconnected | No internal connection; the datasheet recommends making no electrical connection to this pin. |
| 3 | NC | unconnected | No internal connection; the datasheet recommends making no electrical connection to this pin. |
| 4 | GND | power_in | Ground pin for the sensor; the device supply range is referenced to this pin. |
| 5 | /SHUTDOWN | input | Chip enable pin; if shutdown is not needed it should be connected to +Vs, and shutdown reduces supply current below 0.5 uA. |
| 6 | NC | unconnected | No internal connection; the datasheet recommends making no electrical connection to this pin. |
| 7 | NC | unconnected | No internal connection; the datasheet recommends making no electrical connection to this pin. |
| 8 | +Vs | power_in | Single supply input with a range of 2.7 V to 5.5 V, with a 0.1 uF ceramic bypass capacitor placed close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GXCAS |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | +Vs | | | 6 | V | | 3 |
| Operating range | | -40 | | 150 | °C | | 3 |
| Junction temperature | | | | 160 | °C | | 3 |
| Storage temperature | | -60 | | 160 | °C | | 3 |
| Supply voltage | V+ | 2.7 | 3.3 | 5.5 | V | | 3 |
| Operating temperature range | TA | -40 | | 125 | °C | | 3 |
| Supply voltage range | | 2.7 | | 5.5 | V | | 4 |
| Supply current, normal operation | | | | 40 | uA | 正常工作 | 4 |
| Supply current, shutdown | | | | 0.5 | uA | 关断 | 4 |
| Temperature range | | -40 | | 125 | °C | | 4 |
| Accuracy (temperature error) | | | 1 | 2 | °C | +25°C, +Vs = 3.3V | 4 |
| Accuracy (temperature error) | | | 1 | 3 | °C | 0°C to +70°C, +VS = 1.8V | 4 |
| Accuracy (temperature error) | | | 2 | 3 | °C | -40°C to +125°C | 4 |
| Supply voltage sensitivity | | | 20 | 100 | m°C/V | TA=25°C, 3.0V<+Vs<5.5V | 4 |
| Scale factor | | | 10 | | mV/°C | −40°C ≤ TA ≤ +125°C | 4 |
| Load regulation | | | 8 | 30 | m°C/uA | −40°C ≤ TA ≤ +105°C | 4 |
| Load regulation | | | | 70 | m°C/uA | 105°C ≤ TA ≤ +125°C | 4 |
| Linearity | | | 0.5 | | °C | | 4 |
| Long-term stability | | | 0.4 | | °C | | 4 |
| Output voltage | VOUT | | 750 | | mV | A=25°C | 4 |
| Output load current | | 0 | | 50 | uA | | 4 |
| Short-circuit current | | | 550 | | uA | | 4 |
| Capacitive load drive | | 1000 | | 10000 | pF | | 4 |
| Device turn-on time | | | 0.5 | 1 | ms | Output within ±1°C, 100 kΩ//100 pF load | 4 |
## CAD (KiCad official)
- Symbol: `GX36Z`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `gx36z-etched.step` / `gx36z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gx36z.step` / `gx36z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [GXCAS datasheet](docs/gx36z-datasheet.pdf) (14 pp, sha256 `bc1824beadf80e7e`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gx36z-datasheet.pdf)