Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
GX30H05
GXCAS · Temperature Sensors · TO-92
GX30H05 from GXCAS, in a TO-92. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin. |
| 2 | DQ | bidirectional | Open-drain 1-Wire data input/output pin needing about 1kΩ external pull-up; in parasitic power mode it also supplies power to the chip. |
| 3 | VDD | power_in | Power supply pin (2.5V to 5.5V); must be connected to ground in parasitic power mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GXCAS |
| Package | TO-92 |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Pin voltage to ground | -0.5 | 6 | V | all pins relative to ground | 22 | ||
| Operating temperature range | -80 | 200 | °C | 22 | |||
| Storage temperature range | -80 | 200 | °C | 22 | |||
| Supply voltage | VDD | 2.5 | 5.5 | V | local power | 22 | |
| Pullup supply voltage (parasitic power) | VPU | 2.5 | 5.5 | V | parasitic power | 22 | |
| Pullup supply voltage (local power) | VPU | 2.5 | V | local power, max is VDD | 22 | ||
| Temperature error | tERR | -0.5 | 0.5 | °C | -10°C to +85°C | 22 | |
| Temperature error | tERR | -1.2 | 1.2 | °C | -55°C to +125°C | 22 | |
| Temperature error | tERR | -1.5 | 1.5 | °C | -80°C to +200°C | 22 | |
| Input logic low | VIL | -0.3 | 0.8 | V | 22 | ||
| Input logic high (local power) | VIH | 2.2 | 5.5 | V | local power; max is lower of 5.5 and VDD+0.3 | 22 | |
| Input logic high (parasitic power) | VIH | 2.5 | V | parasitic power | 22 | ||
| Sink current | IL | 4 | mA | VI/O = 0.4V | 22 | ||
| Standby current | IDDS | 750 | 1000 | nA | 22 | ||
| Active current | IDD | 1.5 | mA | VDD = 5V | 22 | ||
| DQ input current | IDQ | 5 | μA | 22 | |||
| Drift | -0.2 | 0.2 | °C | 22 | |||
| NV Write Cycle Time | tWR | 8 | 12 | ms | 23 | ||
| EEPROM Writes | NEEWR | 1000 | writes | -55°C to +55°C | 23 | ||
| EEPROM Data Retention | tEEDR | 10 | years | -55°C to +55°C | 23 | ||
| Time to Strong Pullup On | tSPON | 10 | µs | Start Convert T Command Issued | 23 | ||
| Time Slot | tSLOT | 60 | 120 | µs | 23 | ||
| Recovery Time | tREC | 1 | µs | 23 | |||
| Write 0 Low Time | tLOW0 | 60 | 120 | µs | 23 | ||
| Write 1 Low Time | tLOW1 | 1 | 15 | µs | 23 | ||
| Read Data Valid | tRDV | 15 | µs | 23 | |||
| Reset Time High | tRSTH | 480 | µs | 23 | |||
| Reset Time Low | tRSTL | 1 | ms | 23 | |||
| Presence-Detect High | tPDHIGH | 15 | 60 | µs | 23 | ||
| Presence-Detect Low | tPDLOW | 60 | 240 | µs | 24 | ||
| Capacitance | CIN/OUT | 25 | pF | 24 | |||
| Temperature Conversion Time | tCONV | 750 | ms | 12-bit resolution | 23 | ||
| Temperature Conversion Time | tCONV | 375 | ms | 11-bit resolution | 23 | ||
| Temperature Conversion Time | tCONV | 187.5 | ms | 10-bit resolution | 23 | ||
| Temperature Conversion Time | tCONV | 93.75 | ms | 9-bit resolution | 23 | ||
| Accuracy (GX30H05 TO-92) | -0.4 | 0.4 | °C | part list; customizable ±0.3/0.2 | 26 |
CAD (KiCad official)
- Symbol:
GX30H05 - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92 (KiCad packages3D, STEP)
- 3D model files:
gx30h05-etched.step/gx30h05-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gx30h05.step/gx30h05.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GXCAS datasheet (29 pp, sha256
aaa21cc01f1ec88a, retrieved 2026-10-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).