main
Ray
gx21m15u: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi…
178ca52
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166
{
"slug": "gx21m15u",
"version": "0.1.0",
"type": "component",
"description": "GXCAS Temperature and Humidity Sensor, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"sensor",
"gx21m15u"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"gx21m15u.kicad_sym",
"gx21m15u.kicad_mod",
"gx21m15u.glb",
"gx21m15u.step",
"gx21m15u.lbr",
"docs/hero.png",
"docs/gx21m15u-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"gx21m15u-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "GX21M15U",
"manufacturer": "GXCAS",
"package": "MSOP-8",
"pin_count": 8,
"category": "Temperature and Humidity Sensor",
"parts": {
"symbol": "gx21m15u.kicad_sym",
"footprint": "gx21m15u.kicad_mod",
"model_3d": "gx21m15u-etched.glb",
"model_3d_plain": "gx21m15u.glb",
"model_3d_step": "gx21m15u-etched.step",
"model_3d_step_plain": "gx21m15u.step",
"lbr": "gx21m15u.lbr"
},
"pins": [
{
"number": "1",
"name": "SDA",
"type": "bidirectional",
"description": "I²C bus bidirectional data line; open-drain output requiring an external pull-up (≈10 kΩ typical). VOL ≤ 0.4 V at IOL = 3 mA. Do not leave floating."
},
{
"number": "2",
"name": "SCL",
"type": "input",
"description": "I²C bus clock input, digital. Operates 20 Hz to 400 kHz, VIH ≥ 0.7·VCC, VIL ≤ 0.3·VCC, ~500 mV input hysteresis. Requires an external pull-up per I²C spec; do not leave floating."
},
{
"number": "3",
"name": "OS",
"type": "output",
"description": "Overtemperature shutdown / interrupt output; open-drain. Asserts when temperature exceeds Tth(ots) (default 80 °C) and releases per comparator/interrupt mode configured in the Conf register. Polarity programmable (default active-low). Sink capability up to 10 mA (abs max); recommend pull-up up to 200 kΩ to minimize self-heating."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground reference; connect to system ground."
},
{
"number": "5",
"name": "A2",
"type": "input",
"description": "I²C slave-address bit 2 (MSB of the 3 user address bits). Tie to GND (logic 0) or VCC (logic 1); no internal bias, must not float. Combined with the fixed '1001' upper nibble to form the 7-bit slave address (1001 A2 A1 A0)."
},
{
"number": "6",
"name": "A1",
"type": "input",
"description": "I²C slave-address bit 1. Tie to GND or VCC; must not float. Part of the 7-bit slave address (1001 A2 A1 A0)."
},
{
"number": "7",
"name": "A0",
"type": "input",
"description": "I²C slave-address bit 0 (LSB of the 3 user address bits). Tie to GND or VCC; must not float. Enables up to 8 devices on the same bus."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage input; 2.8 V to 5.5 V recommended operating range (absolute max 6.0 V). Bypass with 0.1 µF decoupling capacitor to GND close to the pin. Typical supply current 80 µA (I²C idle), 0.2 µA in shutdown."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C2758002",
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T18:58:27Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "gx21m15u.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3,
0.95
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "gx21m15u-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3,
0.95
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "3f9434e7f501a6be83366d5bb91c6bb09e27a654ed0a7e43853826c28a1b23f2",
"checked": "2026-10-26",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}